Abstract:Amorphous SiBCN ceramics are a unique class of structure materials with potential applicationsas high-temperature heat-resistant structural components owing to their combination of special structure and properties of low specific weight, high specific strength and excellent damage tolerance at elevated temperatures. However, it is still in need for further mechanical properties improvements for actual demands by rational co-design of architecture and chemistry as well as understanding the basic features of morphological/microstructural evolution and failure behavior. Thus in this attempt, to target the dense amorphous Si2ByC2N (y=1.5～4) monoliths with high mechanical properties, an attractive way of combinatorial mechanical alloying and high-pressure sintering technique (1000 oC/3～5 GPa/30 min) was proposed using elemental powders of graphite, hexagonal BN, cubic Si and boron as raw materials. The sintering pressure induced microstructural evolution, phase transformation and thermal stability have been investigated by XRD, SEM, TEM and TG measurements, and mechanical performance, especially the fracture behavior was also discussed in details. Results clearly presented that an increase in sintering pressure promoted the phase transformation of completely amorphous matrix to a hybrid structure of substantial amorphous phases and few nanocrystals of metal c-Si and/or t-BN(C) for some monoliths, implying boron-content depending phase composition. High-pressure sintering effectively promoted the densification leading to free volume annihilation and the river-like fracture morphology occurrence. A monotonous increase of the bulk density, nano hardness and Young's modulus as a function of the sintering pressure was observed. Under the same sintering conditions, the increase in boron content weakened the mechanical properties and thermal stability of the amorphous Si2ByC2N (y=1.5～4) monoliths. Dense amorphous Si2B1.5C2N monoliths consolidated at 1000 oC/5 GPa/30 min showed the best performance with the bulk density, nano hardness and Young's modulus obtaining at 2.69 g/cm3, 33.6±2.2 GPa and 414.2±16.5 GPa, respectively.

Heterogeneous Oxidation Involving Different Atomic Clusters in Sintering-Free Amorphous SiBCN Ceramic with MA@PDC-SiBCN Structure

Heterogeneous Oxidation of Different Atomic Clusters in Amorphous SiBCN Ceramic Associated with Phase Separation

Heterogeneous Oxidation Behavior and Kinetic Mechanisms of SiBCN Ceramic with Structure of MA-SiBCN Coated by PDCs-SiBCN

Oxidation Behavior of Amorphous and Nanocrystalline SiBCN Ceramics – Kinetic Consideration and Microstructure

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Microstructure and high-temperature properties of SI-B-C-N MA-powders and ceramic

Fabrication of Dense SiBCN Monolith at a Lower Temperature Andits High-Temperature Performance

Comparative study on the microstructure evolution and crystallization behavior of precursor-derived and mechanical alloying derived SiBCN

New Design Concept for Stable Α-Silicon Nitride Based on the Initial Oxidation Evolution at the Atomic and Molecular Levels

Microstructural evolution and oxide layer structure of Csf/SiBCN composites during oxidation at 1500 °C

High-temperature Oxidation Resistance of Dense Amorphous Boron-Rich SiBCN Monoliths

Microstructural evolution and mechanical performance of high-pressure sintered dense amorphous SiBCN monoliths

Effects of boron addition on the high temperature oxidation resistance of dense sSiBCN monoliths at 1500 °C

Carbon content-dependent microstructures, surface characteristics and thermal stability of mechanical alloying derived SiBCN powders

Preparation, Microstructures, Mechanical Properties and Oxidation Resistance of SiBCN/ZrB2–ZrN Ceramics by Reactive Hot Pressing

Oxidation Behavior of Amorphous Si-(B)-C-N Ceramic in Ambient Air

Improved oxidation resistance of SPS sintered Si2BC3N ceramics with disilicides (MoSi2, HfSi2, TaSi2) addition

Oxide Scale Microstructure and Scale Growth Kinetics of the Hot-Pressed SiBCN-Ti Ceramics Oxidized at 1500 °C

High-pressure Synthesis, Mechanical Properties and Oxidation Behavior of Advanced Boron-Containing Α/β-Si 3N 4/si Ceramics Using Polymer-Derived Amorphous SiBN Ceramics

Novel Csf/SiBCN Composites Prepared by Densifying Csf/MA-SiBCN with the PIP Process: Oxidation Behavior and Damage Mechanism

Single-source-precursor synthesis of dense monolithic SiC/(Ti0.25Zr0.25Hf0.25Ta0.25)C ceramic nanocomposite with excellent high-temperature oxidation resistance