Abstract:This paper reports a novel oscillation control algorithm for MEMS vibratory gyroscopes using a modified electromechanical amplitude modulation (MEAM) technique, which enhances the robustness against the frequency variation of the driving mode, compared to the conventional EAM (CEAM) scheme. In this approach, the carrier voltage exerted on the proof mass is frequency-modulated by the drive resonant frequency. Accordingly, the pick-up signal from the interface circuit involves a constant-frequency component that contains the amplitude and phase information of the vibration displacement. In other words, this informational detection signal is independent of the mechanical resonant frequency, which varies due to different batches, imprecise micro-fabrication and changing environmental temperature. In this paper, the automatic gain control loop together with the phase-locked loop are simultaneously analyzed using the averaging method and Routh–Hurwitz criterion, deriving the stability condition and the parameter optimization rules of the transient response. Then, a simulation model based on the real system is set up to evaluate the control algorithm. Further, the proposed MEAM method is tested using a field-programmable-gate-array based digital platform on a capacitive vibratory gyroscope. By optimizing the control parameters, the transient response of the drive amplitude reveals a settling time of 45.2 ms without overshoot, according well with the theoretical prediction and simulation results. The first measurement results show that the amplitude variance of the drive displacement is 12 ppm in an hour while the phase standard deviation is as low as 0.0004°. The mode-split gyroscope operating under atmospheric pressure demonstrates an outstanding performance. By virtue of the proposed MEAM method, the bias instability and angle random walk are measured to be 0.9° h−1 (improved by 2.4 times compared to the CEAM method) and 0.068° (√h)−1 (improved by 1.4 times), respectively.

A 0.017 $^{\circ}$ /h Rate-Integrating Micro-Shell Resonator Gyroscope Using Virtual Rotation Modulation

A 0.09°/h Bias-Instability MEMS Gyroscope Working with a Fixed Resonance Frequency

A Sub-0.1°/H Bias-Instability MEMS Gyroscope Using Resonant Constant-Frequency Driving Technique

Noise Analysis and Modeling for a Digital Control Architecture for Lissajous Frequency-Modulated MEMS Gyroscope with Amplitude-Modulated Readout

A Digital Control Structure for Lissajous Frequency-Modulated Mode MEMS Gyroscope

A Novel Amplitude-Phase Information Extraction Architecture for MEMS Vibratory Gyroscopes Using a Modified Double Side-Band Demodulation Configuration

Performance Characterization of a Bulk Micromachined Gyroscope Working at Atmosphere

A MEMS Rate-Integrating Gyroscope (RIG) With In-Run Automatic Mode-Matching

4.11-Million Q-factor Whole-Angle MEMS Hemispherical Resonator Gyroscope with 0.013°/h Bias Instability

A Wafer-Level Vacuum Packaged MEMS Disk Resonator Gyroscope With 0.42°/h Bias Instability Within ±300°/s Full Scale

A Rate Hemispherical Resonator Gyroscope with Bias Stability of 0.0056°/h with Compensation of Phase Delay

High-Q Microsphere Resonators for Angular Velocity Sensing in Gyroscopes

Synchronous In-Phase and Quadrature Demodulation Technique for Resonant Micro-Optic Gyroscope.

Performance of Closed-Loop Resonant Micro Optic Gyro with Hybrid Digital Phase Modulation

Design of a Micro-Electro Mechanical System Quad Mass Gyroscope with Compliant Mechanical Amplification

A novel oscillation control for MEMS vibratory gyroscopes using a modified electromechanical amplitude modulation technique

A 0.57°/h Bias Instability 0.067°/√h Angle Random Walk MEMS Gyroscope with CMOS Readout Circuit

Optomechanical Gyroscope Based on Micro-Hemispherical Shell and Optical Ring Resonators

0.015 Degree-Per-Hour Honeycomb Disk Resonator Gyroscope

High sensitivity rate-integrating hemispherical resonator gyroscope with dead area compensation for damping asymmetry

A 0.5 Degrees/H Bias Instability 0.067 Degrees/Root H Angle Random Walk Mems Gyroscope With Cmos Readout Circuit