Abstract:GH3625 alloy is widely used in aviation, nuclear power and other fields of hot section components. However, the high alloying level, significant deformation resistance, and narrow hot working window of the alloy bring great challenge to the plastic deformation of the alloy. The hot deformation behavior and microstructure evolution of as-forged GH3625 alloy were studied by hot compression tests with deformation temperatures of 930–1180 °C, strain rates of 0.001–1 s −1 and true strain of 0.92. The results show that the flow stress of the alloy exhibits noticeable characteristics of temperature-negative sensitivity and rate-positive sensitivity. The true stress-strain curves are of two types: dynamic recovery (DRV) and dynamic recrystallization (DRX). The strain-compensated Arrhenius constitutive model was used to predict the alloy's flow behavior, with a linear fitting correlation coefficient (R) of 0.9872 and an average relative error (AARE) of 8.92%. The hot processing map of the alloy based on Prasad was constructed and superimposed. It was found that there were two instability regions, which were located in the low temperature and high strain rate region and the high temperature and low strain rate region respectively. The optimal processing region was 1154∼1180 °C/0.75–1 s −1 combined with the true stress-strain curves and the microstructure. Continuous dynamic recrystallization (CDRX) at subgrains rotation and discontinuous dynamic recrystallization (DDRX) at grain boundaries were identified during thermal deformation. As the η value decreases, the dynamic recrystallization grain size decreases under the deformation condition of 930–1180 °C/1 s −1 , and the microstructure evolution mechanism changes from DDRX→ DDRX + CDRX→ DDRX + CDRX + DRV → CDRX + DRV, and ∑3 TBs also reduces.

Effects of High Gravity on the Nucleation and Precipitation of Ö Phase of GH4169 Alloy

Effects of High Gravity Field on Microstructure and Properties of ZL205A Alloy

Effect of Initial Overload on the Low Cycle Fatigue Life of Gh4169 Alloy at Different Temperatures

An Investigation of the Effect of High-Temperature Cyclic Straining and Creep Loading on Tensile Mechanical Properties of GH4145/SQ Alloy

New Research Development of Superalloy GH4169

Effects of Super-gravity Field on Solidification Structure and Microhardness of Al-Ni-Cr Alloy

Achieving Enhanced Strength Retention at Elevated Temperatures in Ultrafine-Fibrous Interconnected Al-Ce-Ni Eutectic Alloy Solidified under Super-Gravity Field

Evolution of solidification structure and mechanical preperties of Al7050 alloy under hypergravity

Influence of Super Gravity Field on Solidification Structures of Cu98.4 Cr1.6 Alloy

Influence of Hot Corrosion on Precipitation of Phase and Tensile Properties of GH4169 Superalloy

Competitive oxidation behavior of Ni-based superalloy GH4738 at extreme temperature

Effect Of Gradient Microstructure Pinned By 6 Phase On Elevated Temperature Performances Of Gh4169

A review on solidification of alloys under hypergravity

δ-phase precipitation regularity of cold-rolled fine-grained GH4169 alloy plate and its effect on mechanical properties

γʹ and γ′′ co-precipitation phenomena in directly aged Alloy 718 with high δ-phase fractions

Temperature Dependence in Tensile Properties and Deformation Behavior of GH4169 Alloy

In Situ Observation of Microstructure and Precipitate Phase Transformation during the Solidification of Mg‐Containing GH3625 Alloy at Different Cooling Rates

Very high cycle fatigue behaviors of GH4169 superalloy at room and high temperatures

Effect of Primary γ′ Phase on High-Temperature Endurance Performance of GH4720Li Superalloy

Effects of grain size on the precipitation pathway and mechanical properties of (CoCrFeNi)94Ti2Al4 high entropy alloy

Study on the hot deformation behavior and microstructure evolution of as-forged GH3625 alloy