Abstract:Carbon dross, a hazardous solid waste generated during aluminum electrolysis, contains large amounts of soluble fluoride ions for the main components of the electrolyte (such as Na3AlF6 and NaF). Response surface methodology (RSM) was used to investigate the mechanism for fluoride ion leaching from carbon dross via water leaching, acid leaching and alkali leaching, and the kinetic and thermodynamic principles of the leaching process were revealed. The RSM predicted the optimum conditions of water leaching, alkali leaching and acid leaching, and the conditions are as follows: temperature, 50 °C; shaking speed, 213 r·min-1; particle size, 0.075 mm; shaking speed, 194 r·min-1; liquid-solid ratio, 12.6 mg·L-1; sodium hydroxide concentration, 1.53 mol·L-1; liquid-solid ratio, 25.0 mg·L-1; sulfuric acid concentration, 2.00 mol·L-1; and temperature, 60 °C,and actual results which were almost consistent with the predicted results were gained. The fluoride ions in the alkaline and acid leaching solutions were mainly the dissociation products of fluorides such as Na3AlF6, Na5Al3F14 and CaF2, as indicated by thermodynamics calculations. In particular, the fluoride compounds dissolved in alkali solution were Na3AlF6, Na5Al3F14, AlF3, ZrF4, K3AlF6, while the acid solution could dissolve only Na3AlF6 and CaF2. The leaching kinetics experiments showed that the leaching rate fit the unreacted shrinking core model [1-2/3α-(1-α)2/3 =kt] and that the leaching process was controlled by internal diffusion. This study provides theoretical guidance for the removal of soluble fluoride ions from carbon dross and will also assist in the separation of electrolytes from carbon dross. ENVIRONMENTAL IMPLICATION: Carbon dross, a hazardous waste generated during the aluminum electrolysis production process, contains a large amount of soluble fluoride. Improper storage will lead the fluoride ions pollution in soil, surface water or groundwater under the direct contact between carbon dross and rainfall, snow or surface runoff. The influence of wind will cause carbon dross dust to pollute further areas. With the human body long-term contact with fluoride ion contaminated soil or water, human health will be seriously harmed.

Green and Efficient Separation of Fluorine from Spent Aluminum Electrolyte by Aluminum Sulfate Solution: Leaching Behavior and Mechanism

Sustainable Recovery of Fluorine from Waste Aluminum Electrolyte by Sulfuric Acid Baking

Efficient lithium recovery from electrolytic aluminum slag via an environmentally friendly process: Leaching behavior and mechanism

Research on synergistic disposal and high-value utilization of secondary aluminum dross and spent carbon anode

Preparation of aluminum fluoride from carbon residue in aluminum electrolysis cell by roasting-leaching method

Stepwise extraction of lithium and potassium and recovery of fluoride from aluminum electrolyte wastes through calcification roasting-two-stage leaching

Leaching kinetics of fluorine during the aluminum removal from spent Li-ion battery cathode materials

Study on ultrasonic leaching and recovery of fluoride from spent cathode carbon of aluminum electrolysis

Selective extraction of lithium and solidified fluoride from overhaul slag by the calcium sulfate roasting and water leaching

Recovery of aluminum oxide and iron oxide from aluminum electrolysis iron-rich cover material and preparation of aluminum fluoride

Preparation of β-AlF 3 from fluorine-containing wastes: Leaching with fluorosilicic acid and crystallization

Purification of spent cathode carbon from aluminum electrolysis cells by alkali fusion-acid leaching process

Aluminum separation by sulfuric acid leaching-solvent extraction from Al-bearing LiFePO4/C powder for recycling of Fe/P

An efficient and clean treatment of spent carbon cathode via fluorination roasting: Deep separation strategy for insoluble aluminosilicates

A Superior Technology for Removing Fluorine from Spent Cathode Carbon: Optimization of the Process by Response Surface Methodology

Study on dissociation mechanism and process of regenerated cryolite

Energy-efficient leaching process for preparation of aluminum sulfate and synergistic extraction of Li and Ga from circulating fluidized bed fly ash

Mechanism for leaching of fluoride ions from carbon dross generated in high-temperature and low-lithium aluminum electrolytic systems

The recycling of carbon-rich solid wastes from aluminum electrolytic cells: a review

Separation and recovery of valuable elements from acid leachate of spent carbon cathode by fractional precipitation method

Research on microwave hydrothermal alkaline leaching defluorination of spent cathode carbon from aluminum electrolysis