Abstract:The conversion of solid waste into secondary resources has become a prerequisite for the sustainable development of the industry. This study focused on the development of the detoxification process for spent carbon cathode (SCC) without environmental pollution risks and the exploration of the recycling direction of recovered carbonaceous materials. First, the mechanism of thermodynamic conversion and decomposition of toxic substances was explored. Parameters of NaOH–Na2CO3 binary molten salt roasting were optimized through an orthogonal design and a single-factor experiment, and gas release behavior during detoxification treatment was investigated. Results showed that most of the fluoride and cyanide were dissociated and decomposed, and the leaching concentration of fluoride and cyanide was as low as 7.58 and 0.12 mg/L after detoxification treatment, respectively. Then, a multistage recovery process of fluorine from fluorine-containing leachate was designed, and the comprehensive utilization of exhaust gas and the recycling of the reaction reagent were realized simultaneously. The possibility of recovering graphitized carbon blending to prepare carbon anodes was discussed in detail, and the catalytic mechanism of main impurity elements on the O2/CO2 reactivity of carbon anodes was investigated via density-functional-based tight binding (DFTB). The results showed that the Boudouard reaction and carbon–O2 reaction were affected because of the presence of Ca or Na, and the recovered graphitized carbon with a low blending ratio was more suitable for the preparation of carbon anodes. Finally, an economic benefit analysis was conducted to evaluate the industrial application potential of the proposed detoxification treatment. Compared with landfills, the proposed process reduced the disposal cost while eliminating environmental pollution risks and realized the on-site recovery and reuse of valuable components, showing considerable environmental and economic benefits.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c06067?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c06067</a>.Formula for preparing carbon anode; scheme of the single-factor experiment; economic benefit analysis; and particle size distribution of the mixture with different NaOH-to-Na2CO3 mass ratios (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c06067/suppl_file/sc0c06067_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Research on microwave hydrothermal alkaline leaching defluorination of spent cathode carbon from aluminum electrolysis

Optimization of response surface methodology (RSM) for defluorination of spent carbon cathode (SCC) in fire-roasting aluminum electrolysis

Study on ultrasonic leaching and recovery of fluoride from spent cathode carbon of aluminum electrolysis

A Superior Technology for Removing Fluorine from Spent Cathode Carbon: Optimization of the Process by Response Surface Methodology

Solidification/stabilization of spent cathode carbon from aluminum electrolysis by vitric, kaolin and calcification agent: fluorides immobilization and cyanides decomposition

An efficient and clean treatment of spent carbon cathode via fluorination roasting: Deep separation strategy for insoluble aluminosilicates

Purification of spent cathode carbon from aluminum electrolysis cells by alkali fusion-acid leaching process

Recovery of fluoride from spent cathode carbon block by combustion combined with water leaching process

Separation and recovery of valuable elements from acid leachate of spent carbon cathode by fractional precipitation method

Research on synergistic disposal and high-value utilization of secondary aluminum dross and spent carbon anode

Methodological Review of Methods and Technology for Utilization of Spent Carbon Cathode in Aluminum Electrolysis

Mechanism for leaching of fluoride ions from carbon dross generated in high-temperature and low-lithium aluminum electrolytic systems

Leaching kinetics of fluorine during the aluminum removal from spent Li-ion battery cathode materials

Stepwise extraction of lithium and potassium and recovery of fluoride from aluminum electrolyte wastes through calcification roasting-two-stage leaching

Microwave-Assisted Hydrothermal Treatment with Soluble Phosphate Added for Heavy Metals Solidification in MSWI Fly Ash

Treatment of Blast Furnace Gas Washing Water by Utilization of Coagulation Associated with Microwave

Deep removal of fluoride from tungsten smelting wastewater by combined chemical coagulation-electrocoagulation treatment: From laboratory test to pilot test

Harmless recovery and utilization of electrolytic aluminum spent cathode carbon block: A comprehensive review

Recovery of carbon from spent carbon cathode by alkaline and acid leaching and thermal treatment and exploration of its application in lithium-ion batteries

Fluorine doped carbon aerogel prepared from spent cathode carbon of aluminum electrolysis towards electrocatalytic synthesis of H2O2

Detoxification and Recovery of Spent Carbon Cathodes via NaOH–Na 2 CO 3 Binary Molten Salt Roasting–Water Leaching: Toward a Circular Economy for Hazardous Solid Waste from Aluminum Electrolysis