Abstract:Solidification conditions and cooling rate can significantly affect the microstructure and the mechanical properties of Nickel-based superalloy GH4169 components repaired by laser direct energy deposition (L-DED). In this work, we employ inter-channel dwell time in the l-DED repairment of GH4169 superalloy groove in order to control the thermal cycles during deposition, thus regulating the microstructure and tensile properties of repaired GH4169 groove. The tensile properties of materials repaired by using different inter-channel dwell times were compared by tensile tests with digital image correlation (DIC) technique, and the microstructure and fracture mechanism were also investigated by scanning electron microscope (SEM). Results show that the dendrite structure, grain size of recrystallization, primary dendrite arm spacing, distribution of Laves and γ'' phases of the repaired material are significantly different under different inter-channel dwell times of 0 s, 4 s, 8 s and the associated different thermal cycles. The content of the Laves phases is lower, the grain size is smaller and distribution of γ'' phases are relatively uniform with the additional dwell time of 8 s. Owing to the difference in microstructure, the tensile strengths of both the repaired material and the substrate material increase with the increase of inter-channel dwell time. Moreover, the repaired GH4169 materials exhibit similar or even higher tensile strength than that of the substrate GH4169 material. Besides, due to the uneven precipitation of Nb element in repaired material and the associated change of Laves phases and carbides, the measured elongations of the substrate are larger than those of the repaired materials. The changes in microstructure under varying dwell times also lead to differences in strain localization and strain hardening exponent of the repaired materials. The present study paved a novel way to achieve high-quality repair of superalloys via laser direct energy deposition.

Effect of Hot-Wire Method on Microstructure and Mechanical Properties of Wire Arc Additive Repaired Superalloy.

The Influence of Solution Temperature on Microstructure Evolution and Mechanical Properties of ATI 718plus Repaired by Wire and Arc Additive Manufacturing

Microstructure evolution and mechanical properties of a nickel-based superalloy repaired using wire and arc additive manufacturing

Microstructure evolution and mechanical properties of wire-fed electron beam directed energy deposition repaired GH4169 superalloy

Tailoring the Crystalline Structures and Mechanical Properties of IN718 Alloy Repaired by Wire-Fed Electron Beam Directed Energy Deposition Through a Custom-Designed Heat Treatment Process

Laves Phase Control and Tensile Properties Optimization of DED-arc Repaired 718plus Components Through the Addition of TiC and Cr2C3

Laves phase control and tensile properties optimization of DED-arc repaired 718Plus components through the addition of TiC and Cr 2 C 3

Effect of Post Heat Treatment on the Microstructure and Mechanical Properties of Wire-Arc Additively Manufactured A357 Alloy Components

Improving the deposition efficiency and mechanical properties of additive manufactured Inconel 625 through hot wire laser metal deposition

Effect of thermal cycles on laser direct energy deposition repair performance of nickel-based superalloy: Microstructure and tensile properties

Numerical Simulation of Thermal Field and Performance Study on H13 Die Steel-Based Wire Arc Additive Manufacturing

Study on the droplet transfer behavior and microstructure of wire arc additive manufactured Inconel 718 alloy assisted by an alternating magnetic field

Microstructure Evolution of Inconel 718 Superalloy During Hot Working and Its Recent Development Tendency

Surface Morphology Refinement and Laves Phase Control of Plasma Arc Additively Manufactured Inconel 718 Via an Alternating Magnetic Field

Effect of Post-Deposition Heat Treatments on the Microstructure and Tensile Properties of Wire-Fed Electron Beam Directed Energy Deposition GH4169 Ni-based Alloy

Improving High-Temperature Mechanical Properties of Additively Manufactured Inconel 718 Through Heat Treatment

Effect of Laser Scanning and Powder Addition on Microstructure and Mechanical Properties for Hot-Wire-Feed Laser Additive Manufacturing

Rolling-assisted direct energy deposited Inconel 718: Microstructural evolution and mechanical properties after optimized heat treatment

Achieving High Strength and Creep Resistance in Inconel 740H Superalloy through Wire-Arc Additive Manufacturing and Thermodynamic-Guided Heat Treatment

Improved Properties of Wire Arc Directed Energy Deposited Thin-Walled Al-6Mg-0.3Sc Component Via Laser Shock Peening

Effect of welding parameters on bead characteristics and mechanical properties of wire and arc additive manufactured inconel 718