Abstract:The need to refuel future missions to Mars and the Moon via in situ resource utilization (ISRU) requires the development of LOX/LCH4 engines, which are complex and expensive to develop and improve. This paper discusses how the use of digital engineering—specifically physics-based modeling (PBM)—can aid in developing, testing, and validating a LOX/LCH4 engine. The model, which focuses on propulsion performance and heat transfer through the engine walls, was created using Siemens' STAR-CCM+ CFD tool. Key features of the model include Eulerian multiphase physics (EMP), complex chemistry (CC) using the eddy dissipation concept (EDC), and segregated solid energy (SSE) for heat transfer. A comparison between the complete GRI 3.0 and Lu's reduced combustion mechanisms was performed, with Lu's mechanism being chosen for its cost-effectiveness and similar output to the GRI mechanism. The model's geometry represents 1/8th of the engine's volume, with a symmetric rotational boundary. The performance of this engine was investigated using NASA's chemical equilibrium analysis (CEA) and STAR-CCM+ simulations, focusing on thrust levels of 125 lbf and 500 lbf. Discrepancies between theoretical predictions and simulations ranged from 1.4% to 28.5%, largely due to differences in modeling assumptions. While NASA CEA has a zero-dimensional, steady-state approach based on idealized conditions, STAR-CCM+ accounts for real-world factors such as multiphase flow, turbulence, and heat loss. For the 125 lbf case, a 9.2% deviation in combustion chamber temperature and a 15.0% difference in thrust were noted, with simulations yielding 113.48 lbf compared to the CEA's 133.52 lbf. In the 500 lbf case, thrust reached 488 lbf, showing a 2.4% deviation from the design target and an 8.6% increase over CEA predictions. Temperature and pressure deviations were also observed, with the highest engine wall temperature at the nozzle throat. Monte Carlo simulations revealed that substituting LNG for LCH4 affects combustion dynamics. The findings emphasize the need for advanced modeling approaches to enhance the prediction accuracy of rocket engine performance, aiding in the development of digital twins for the CROME.

Video Information-Based Liquid Rocket Engine Fault Simulation Test Method under Complex Environment

The real-time fault simulation system for liquid propellant rocket engines

Development of Fault Diagnosis Platform for Liquid Rocket Engine Based on Experimental Data

A New Generation of Hardware-in-the-loop Simulation Technology Combined with High-performance Computers and Digital Twins

Anomaly Detection Method for Rocket Engines Based on Convex Optimized Information Fusion

Numerical investigation of liquid oxygen filling process in liquid rocket engine by a multi-dimensional co-simulation method

Real-time accommodation of actuator faults on a reusable rocket engine

Dynamic Characteristics of LOX/Kerosene Variable Thrust Liquid Rocket Engine Test System Based on General Modular Simulation Method

Intelligent Fault Diagnosis of Liquid Rocket Engine via Interpretable LSTM with Multisensory Data

Robust Sensor Optimization for Liquid Propellant Rocket Engine Model Parameter Estimation

Fault diagnosis of liquid rocket engine based on fuzzy measuring of fuzzy rule sets

NEURAL NETWORK APPROACH TO FAULT DETECTION OF LIQUID ROCKET ENGINE (Ⅰ)NONLINEAR IDENTIFICATION TECHNOLOGY

Research on Virtual Prototype and Digital Test Method of Pump-Fed Propulsion System

Dynamic model-assisted transferable network for liquid rocket engine fault diagnosis using limited fault samples

A soft-target difference scaling network via relational knowledge distillation for fault detection of liquid rocket engine under multi-source trouble-free samples

Design and implementation of aeroengine fault data simulation generator

Optimizing coupled fault diagnosis in liquid rocket engines via distributed robust multi-model Kalman filter

Virtual Replay of Failure and Design Modification of One-side Ejection Launching System

Fault detection and diagnosis for liquid rocket engines with sample imbalance based on Wasserstein generative adversarial nets and multilayer perceptron

Liquid Rocket Engine Performance Characterization Using Computational Modeling: Preliminary Analysis and Validation

A safety assessment method for a liquid launch rocket based on the belief rule base with environmental disturbance