Abstract:Virtual testing is a method that simulates lab testing using multi-body dynamic analysis software. The main advantages of this approach include that the design can be evaluated before a prototype is available and virtual testing results can be easily validated by subsequent physical testing. The disadvantage is that accurate specimen models are sometimes hard to obtain since nonlinear components such as tires, bushings, dampers, and engine mounts are hard to model. Therefore, virtual testing accuracy varies significantly. The typical virtual rigs include tire and spindle coupled test rigs for full vehicle tests and multi-axis shaker tables for component tests. Hybrid simulation combines physical and virtual components, inputs and constraints to create a composite simulation system. Hybrid simulation enables the hard to model components to be tested in the lab. As a result, it greatly reduces the requirement for an accurate analysis model and increases the chance for obtaining more accurate results. Mechanical Hardware-in-the-Loop? (mHIL™) is one of the hybrid simulation approaches. It has been developed to enable actual physical components to replace selected components for "Real-Time" vehicle dynamic simulation. In this approach, the virtual to physical coupling is accomplished in "real-time" allowing an accurate vehicle dynamics simulation to be conducted in a hybrid environment. The disadvantage of this approach is that the "real-time" requirement poses significant constraints on the model and test rig. To address the limitation of real-time techniques, an alternative technique, Hybrid System Response Convergence (HSRC), has been developed. The HSRC method uses an iterative approach to develop a solution that satisfies the equations of motion for the hybrid system. The iterative approach allows the physical and virtual systems to run sequentially as open-loop systems, rather than simultaneously, thus avoiding the requirement to run in real-time. The disadvantage of this method is that an iterative approach is more time consuming. Another approach addressing the limitation of real-time is to use a software named OpenFresco and a predictor-corrector algorithm to connect dynamic analysis software and a test system. If the solving speed cannot meet the requirement of real time, the predictor-corrector algorithm slows down the actuator to allow more time for the model to be solved. This approach is called soft real-time hybrid simulation. The disadvantage of this approach is that it still requires the hybrid simulation to be conducted at the near "real-time" speed.

A New Generation of Hardware-in-the-loop Simulation Technology Combined with High-performance Computers and Digital Twins

Aerospace Numerical Simulation and Digital Prototyping Technologies

The real-time fault simulation system for liquid propellant rocket engines

Hardware-in-the-loop Real-Time Platform for More Electric Aircraft

Hardware-In-The-Loop Simulation Study on the Fuel Control Strategy of A Gas Turbine Engine

Video Information-Based Liquid Rocket Engine Fault Simulation Test Method under Complex Environment

Design of Hardware-In-Loop Simulation System for Unmanned Aerial Vehicle

Design of Hardware-in-the-loop simulation system for diesel

Advances of Virtual Testing and Hybrid Simulation in Automotive Performance and Durability Evaluation

A Digital Twin-Driven Framework for the Online Prediction and Control of Assembly Quality Toward the Solid Rocket Engine

The hardware-in-the-loop simulation study on the control strategy of gas turbine

A Robotic Hardware-in-the-Loop Simulation System for Flying Objects Contact in Space.

Principles And Application Of The Real-Time Hardware-In-The-Loop Simulation Platform Based On Multi-Thread And Can

Hardware-in-the-loop simulation for the contact dynamic process of flying objects in space

Simulation on HIL Ground Experiment Simulator for On-orbit Docking

Research on Virtual Hardware-in-the-loop Simulator for On-orbit Docking

Development of a New Hardware-in-loop Simulation Platform for GD-1 Diesel Engine Based on CAN and Multithread Technologies

Dynamic Characteristics of LOX/Kerosene Variable Thrust Liquid Rocket Engine Test System Based on General Modular Simulation Method

A product performance rapid simulation approach driven by digital twin data: Part 1. For variable product structures

The Development of A Real-Time Hardware-in-the-Loop Test Bench for Hybrid Electric Vehicles Based on Multi-Thread Technology

Design and Realization of Hardware-in-the-loop Simulation for Turbofan-engine