Abstract:The need to refuel future missions to Mars and the Moon via in situ resource utilization (ISRU) requires the development of LOX/LCH4 engines, which are complex and expensive to develop and improve. This paper discusses how the use of digital engineering—specifically physics-based modeling (PBM)—can aid in developing, testing, and validating a LOX/LCH4 engine. The model, which focuses on propulsion performance and heat transfer through the engine walls, was created using Siemens' STAR-CCM+ CFD tool. Key features of the model include Eulerian multiphase physics (EMP), complex chemistry (CC) using the eddy dissipation concept (EDC), and segregated solid energy (SSE) for heat transfer. A comparison between the complete GRI 3.0 and Lu's reduced combustion mechanisms was performed, with Lu's mechanism being chosen for its cost-effectiveness and similar output to the GRI mechanism. The model's geometry represents 1/8th of the engine's volume, with a symmetric rotational boundary. The performance of this engine was investigated using NASA's chemical equilibrium analysis (CEA) and STAR-CCM+ simulations, focusing on thrust levels of 125 lbf and 500 lbf. Discrepancies between theoretical predictions and simulations ranged from 1.4% to 28.5%, largely due to differences in modeling assumptions. While NASA CEA has a zero-dimensional, steady-state approach based on idealized conditions, STAR-CCM+ accounts for real-world factors such as multiphase flow, turbulence, and heat loss. For the 125 lbf case, a 9.2% deviation in combustion chamber temperature and a 15.0% difference in thrust were noted, with simulations yielding 113.48 lbf compared to the CEA's 133.52 lbf. In the 500 lbf case, thrust reached 488 lbf, showing a 2.4% deviation from the design target and an 8.6% increase over CEA predictions. Temperature and pressure deviations were also observed, with the highest engine wall temperature at the nozzle throat. Monte Carlo simulations revealed that substituting LNG for LCH4 affects combustion dynamics. The findings emphasize the need for advanced modeling approaches to enhance the prediction accuracy of rocket engine performance, aiding in the development of digital twins for the CROME.

The real-time fault simulation system for liquid propellant rocket engines

Numerical Simulation of Sloshing in the Propellant Tank of Reusable Rocket Vehicle Using Meshfree Method

Numerical Simulation of the Performance of the Sc-89 Jet Impact System

A New Generation of Hardware-in-the-loop Simulation Technology Combined with High-performance Computers and Digital Twins

Real-time on-line fault-detection algorithm for the starting process of liquid-propellant rocket-engines

Optimizing coupled fault diagnosis in liquid rocket engines via distributed robust multi-model Kalman filter

Dynamic Characteristics of LOX/Kerosene Variable Thrust Liquid Rocket Engine Test System Based on General Modular Simulation Method

NEURAL NETWORK APPROACH TO FAULT DETECTION OF LIQUID ROCKET ENGINE (Ⅰ)NONLINEAR IDENTIFICATION TECHNOLOGY

Robust Sensor Optimization for Liquid Propellant Rocket Engine Model Parameter Estimation

Real-time accommodation of actuator faults on a reusable rocket engine

Modularization Modeling and Simulation for the Transients of Liquid Propellant Rocket Engines

Fault diagnosis of liquid rocket engine based on fuzzy measuring of fuzzy rule sets

Dynamic model-assisted transferable network for liquid rocket engine fault diagnosis using limited fault samples

Intelligent Fault Diagnosis of Liquid Rocket Engine via Interpretable LSTM with Multisensory Data

Liquid Rocket Engine Performance Characterization Using Computational Modeling: Preliminary Analysis and Validation

STABLE PROGRAMMED MANIFOLD SOLVER FOR VIRTUAL PROTOTYPING MOTION SIMULATION

Development of Fault Diagnosis Platform for Liquid Rocket Engine Based on Experimental Data

Turbopump Parametric Modelling and Reliability Assessment for Reusable Rocket Engine Applications

A Novel Optimal Sensor Placement Method for Optimizing the Diagnosability of Liquid Rocket Engine

Finite-Element Modeling and Frequency-Domain Analysis of Liquid-Propulsion Launch Vehicle

Particle-Filter-Based Fault Diagnosis for the Startup Process of an Open-Cycle Liquid-Propellant Rocket Engine