Abstract:The propulsion system is one of the important and vulnerable sub-systems in a strap-on launch vehicle. Among different failure modes, the thrust drop fault is the most common and remediable one. It degrades vehicle attitude tracking ability directly. To this end, this paper focuses on the design and application of attitude reconstruction problems with a thrust loss fault during the ascending flight phase. We firstly analyze the special failure modes and impacts on the propulsion system through a Failure Modes and Effects Analysis (FMEA). Then, six degrees of freedom dynamic and kinematic models are formulated, which are integrated into the Matlab/Simulink environment afterward. The above models' validation is realized through numerical simulations with different fault severity. Simulation results show that the max attitude deviation is only 0.67° approximately in the pitch angle channel under normal conditions, and the flight attitude angle deviation is directly proportional to the thrust loss percentage when the thrust drop fault occurs. Based on the validated models, a practical reconfigurable ideal through adjusting the control allocation matrix is analyzed. Then, an automation redistribution mechanism based on the moment equivalent principle before and after the thrust drop is proposed to realize proportional allocation of virtual control command among the actuators. The effectiveness of the designed attitude reconstruction method is demonstrated through numerical simulations and comparison analysis under various fault scenarios. The results show that the rocket attitude can be quickly adjusted to the predetermined program angle within about 2.5 s after the shutdown failure of a single engine, and the flight speed and altitude can also reach the required value with another 17 s engine operation. Therefore, the designed control reconfiguration strategy can deal with the thrust loss fault with high practicability and can be applied to real-time FTC systems. Last but not least, conclusions and prospects are presented to inspire researchers with further exploration in this field.

Virtual Replay of Failure and Design Modification of One-side Ejection Launching System

Ejection-Style Self-Imaging System Design And Finite Element Analysis For Lunar Lander

A VR-based test and simulation system - With application in non-destructive evaluation

Dynamic Simulaiton Study of Rudder System Based on Virtual Prototype Technology

Crashworthiness Design Optimization for an Evtol Aircraft.

Video Information-Based Liquid Rocket Engine Fault Simulation Test Method under Complex Environment

Parameterization Dynamics Visual Design Platform for Missile Launching System

Modeling and Simulation of Launch Dynamics for ″Metal Storm″ Weapon

Simulation Analysis of Dynamic Characteristic of an Elastic Launching System

Simulation Studies of Coupled Rigid and Flexible Multi-body Dynamics for Multiple Launch Rocket Systems

Co-simulation of self-propelled artillery based on virtual prototype technology

Research on Virtual Prototype and Digital Test Method of Pump-Fed Propulsion System

The Impact Modeling and Experimental Verification of a Launch Vehicle with Crushing-Type Landing Gear

Virtual vibration analysis and verification of the re-entry capsule for a multi-functional spaceship

Research on Buffer of Small Bodies Lander Based on Virtual Prototype Technology

Research on the Architecture of Simulative Experiment System for Mechanism Motion Reliability Analysis

Autonomous Attitude Reconstruction Analysis for Propulsion System with Typical Thrust Drop Fault

Research on Dynamics Modeling of the Lunar Soft-Landing Explorer

Modeling and simulation of virtual robotic excavator prototype

Design and dynamic analysis of landing gear system in vertical takeoff and vertical landing reusable launch vehicle

A Method to Develop Mechanical Product Virtual Prototype Considering Tribological Behavior