Reconfigurable Soliton Crystals in Integrated Microresonators

X. X. Chia,K. Y. K. Ong,A. A. Rahim,G. F. R. Chen,P. Xing,D. T. H. Tan

DOI: https://doi.org/10.1109/cleo-pr60912.2024.10676646

2024-01-01

Abstract:Configurable and adiabatic generation of soliton crystals (SC) is achieved in an $\text{Si}_{3}\mathrm{N}_{4}$ microring-resonator. 2-SC to 7-SCs are attained, achieving up to 21 dB increase in line power and 92 Gb/s PAM4 transmission per line.

What problem does this paper attempt to address?

Soliton Crystals in 4H-Silicon Carbide-on-insulator-based Integrated Optical Microring Resonator

Adnan Ali Afridi,Yaoqin Lu,Xiaodong Shi,Ruixuan Wang,Jingwei Li,Qing Li,Haiyan Ou

DOI: https://doi.org/10.1364/cleo_si.2024.sf3j.3

2024-01-01

Abstract:We experimentally demonstrated the deterministic access of soliton crystals in a 4H-silicon carbide microring resonator. The soliton crystals with various line spacings of 6, and 10 times the free spectral range are generated within the same microring resonator but under different pump wavelengths.
Leveraging reconfigurable micro-resonator soliton crystals for Intensity-Modulated Direct Detection Data Transmission

Xavier X. Chia,Kenny Y. K. Ong,A. Aadhi,George F. R. Chen,Ju Won Choi,Byoung-Uk Sohn,Amdad Chowdury,Dawn T. H. Tan

2024-10-11

Abstract:The perennial demand for highly efficient short-haul communications is evidenced by a sustained explosion of growth in data center infrastructure that is predicted to continue for the foreseeable future. In these relatively compact networks, cost-sensitivity is of particular importance, which limits options to direct detection schemes that are more cost efficient than their coherent counterparts. Since their initial demonstration, multi-soliton states in optical microresonators have been observed to manifest in self-organised ensembles where soliton pulses are equally spaced around the resonators. In the spectral domain, these states, dubbed soliton crystals (SCs), result in significant enhancements to individual comb lines depending on the crystal state, making them well suited towards intensity-modulated direct detection (IMDD) schemes. In this work, we experimentally demonstrate adiabatic, deterministic access to lower-order soliton crystal states using an auxiliary-assisted cavity pumping method, attaining up to 19.6 dB enhancement of the comb lines in the 7-SC configuration compared to the single-soliton state. Seven comb lines of each 46 Gbaud/s pulse amplitude modulation 4 (PAM4) is transmitted over 4km of fiber in comb lines across the C-band with bit-error-rates (BER) as low as 5E-5. Our demonstration shows the promising way of using soliton crystal states as future integrated sources for highly stable Terabaud/s datacenter communications.

Optics
Synthesized soliton crystals

Zhizhou Lu,Hao-Jing Chen,Weiqiang Wang,Lu Yao,Yang Wang,Yan Yu,B. E. Little,S. T. Chu,Qihuang Gong,Wei Zhao,Xu Yi,Yun-Feng Xiao,Wenfu Zhang

DOI: https://doi.org/10.1038/s41467-021-23172-2

IF: 16.6

2021-05-26

Nature Communications

Abstract:Abstract Dissipative Kerr soliton (DKS) featuring broadband coherent frequency comb with compact size and low power consumption, provides an unparalleled tool for nonlinear physics investigation and precise measurement applications. However, the complex nonlinear dynamics generally leads to stochastic soliton formation process and makes it highly challenging to manipulate soliton number and temporal distribution in the microcavity. Here, synthesized and reconfigurable soliton crystals (SCs) are demonstrated by constructing a periodic intra-cavity potential field, which allows deterministic SCs synthesis with soliton numbers from 1 to 32 in a monolithic integrated microcavity. The ordered temporal distribution coherently enhanced the soliton crystal comb lines power up to 3 orders of magnitude in comparison to the single-soliton state. The interaction between the traveling potential field and the soliton crystals creates periodic forces on soliton and results in forced soliton oscillation. Our work paves the way to effectively manipulate cavity solitons. The demonstrated synthesized SCs offer reconfigurable temporal and spectral profiles, which provide compelling advantages for practical applications such as photonic radar, satellite communication and radio-frequency filter.

multidisciplinary sciences
Fabrication of the High-Q Si 3 N 4 Microresonators for Soliton Microcombs

Shuai Wan,Rui Niu,Jin-Lan Peng,Jin Li,Guang-Can Guo,Chang-Ling Zou,Chun-Hua Dong

DOI: https://doi.org/10.3788/col202220.032201

IF: 2.56

2022-01-01

Chinese Optics Letters

Abstract:The microresonator-based soliton microcomb has shown a promising future in many applications. In this work, we report the fabrication of high quality [Q) Si 3 N 4 microring resonators for soliton microcomb generation. By developing the fabrication process with crack isolation trenches and annealing, we can deposit thick stoichiometric Si 3 N 4 film of 800 nm without cracks in the central area. The highest intrinsic Q of the Si 3 N 4 microring obtained in our experiments is about 6 × 10 6 ,corresponding to a propagation loss as low as 0.058 dBm/cm. With such a high Q film, we fabricate microrings with the anomalous dispersion and demonstrate the generation of soliton microcombs with 100 mW on-chip pump power, with an optical parametric oscillation threshold of only 13.4 mW. Our Si 3 N 4 integrated chip provides an ideal platform for researches and applications of nonlinear photonics and integrated photonics.
Soliton Microcomb Generation in a III-V Photonic Crystal Cavity

Alberto Nardi,Alisa Davydova,Nikolai Kuznetsov,Miles H. Anderson,Charles Möhl,Johann Riemensberger,Paul Seidler,Tobias J. Kippenberg

2023-04-27

Abstract:Photonic crystals, material structures in which the dielectric function varies periodically in one, two, or three dimensions, can provide exquisite control over the propagation and confinement of light. By tailoring their band structure, exceptional optical effects can be achieved, such as slow light propagation or, through the creation of photonic bandgaps, optical cavities with both a high quality factor and a small mode volume. Photonic crystal cavities have been used to realize compact nano-lasers and achieve strong coupling to quantum emitters, such as semiconductor quantum dots, color centers, or cold atoms. A useful attribute of photonic crystals is the ability to create chirped mirrors. Chirping has underpinned advances in ultra-fast lasers based on bulk mirrors, but has yet to be fully exploited in integrated photonics, where it could provide a means to engineer otherwise unattainable dispersion profiles for a range of nonlinear optical applications, including soliton frequency comb generation. The vast majority of integrated resonators for frequency combs make use of microring geometries, where only waveguide width and height are varied to engineer dispersion. Generation of frequency combs has been demonstrated with one-dimensional photonic crystal cavities made of silicon nitride, but the low index contrast prevents formation of broad soliton combs. We overcome these challenges by using a photonic-crystal Fabry-Pérot resonator made of gallium phosphide, a material with a high refractive index and a Kerr nonlinearity 200 times larger than that of silicon nitride. We employ chirped photonic crystal mirrors to provide anomalous dispersion. With subharmonic pulsed pumping at an average power of 23.6 mW, we are able to access stable dissipative Kerr frequency combs. We demonstrate soliton formation with a 3-dB bandwidth of 3.0 THz, corresponding to a pulse duration of 60 fs.

Optics
Perfect soliton crystals on demand

Yang He,Jingwei Ling,Mingxiao Li,Qiang Lin

DOI: https://doi.org/10.48550/arXiv.1910.00114

2019-10-01

Abstract:Recent advance of soliton microcombs has shown great promise to revolutionize many important areas such as optical communication, spectroscopic sensing, optical clock, and frequency synthesis. A largely tunable comb line spacing is crucial for the practical application of soliton microcombs, which unfortunately is challenging to realize for an on-chip monolithic microresonator. The recently discovered perfect soliton crystal (PSC) offers a convenient route to tune the comb line spacing. However, excitation of a PSC is generally stochastic by its nature and accessing a certain PSC state requires delicate tuning procedure. Here we demonstrate the on-demand generation of PSCs in a lithium niobate microresonator. The unique device characteristics allow us to produce a variety of PCSs and to switch between different PSC states, deterministically and repetitively. We utilize the device to show arbitrary dialing of the comb line spacing from 1 to 11 times of the free-spectral range of the resonator. The demonstration of PCSs on demand may now open up a great avenue for flexibly controlling the repetition rate of soliton pulses, which would significantly enhance and extend the application potential of soliton microcombs for communication, signal processing, and sensing.

Optics
IMDD Data Transmission with Microresonator Soliton Crystals

K. Y. K. Ong,X. X. Chia,A. A. Rahim,G. F. R. Chen,D. T. H. Tan

DOI: https://doi.org/10.1364/ofc.2024.tu2b.2

2024-01-01

Abstract:Intensity modulated direct detection data transmission using microresonator multi-soliton and 2-soliton crystal states are demonstrated. We achieve error free transmission of 10Gb/s NRZ data and BERs in the region of 10-4 with 28.05GBd/s PAM4 data.
Perfect Soliton Crystal Linear-Wave Scattering in a Si3N4 Microring Resonator

Hongyi Zhang,Liangjun Lu,Jianping Cheu,Linjie Zhou

DOI: https://doi.org/10.1109/cleo/europe-eqec57999.2023.10231442

2023-01-01

Abstract:Soliton microcombs (SMCs), originating from the balance of cavity loss and gain as well as nonlinearity and dispersion, are formed in the micro-resonator [1]. Among them, the perfect soliton crystal (PSC) is a special soliton state with soliton pulses distributed evenly along the resonator circumference. The number of the PSCs corresponds to the comb line spacing [2]. Previously, a cascaded Bragg scattering process driven by an extra incident continuous wave (C.W.) laser was observed in a Kerr micro-resonator, which triggers the generation of idler frequency components for the dissipative solitons [3]. In this work, we investigate the PSC linear-wave scattering by injecting an extra probe laser. With a properly set probe laser, the comb spectrum is adjusted in the experiments.
High-fidelity Cavity Soliton Generation in Crystalline AlN Micro-Ring Resonators.

Zheng Gong,Alexander Bruch,Mohan Shen,Xiang Guo,Hojoong Jung,Linran Fan,Xianwen Liu,Liang Zhang,Junxi Wang,Jinmin Li,Jianchang Yan,Hong X. Tang

DOI: https://doi.org/10.1364/ol.43.004366

IF: 3.6

2018-01-01

Optics Letters

Abstract:Chip-scale mode-locked dissipative Kerr solitons have been realized on various materials platforms, making it possible to achieve a miniature, highly coherent frequency comb source with high repetition rates. Aluminum nitride (AlN), an appealing nonlinear optical material having both Kerr (chi(3)), and Pockels (chi(2)) effects, has immerse potential for comb self-referencing without the need for external harmonic generators. However, cavity soliton states have not yet been achieved in AlN microresonators. Here, we demonstrate mode-locked Kerr cavity soliton generation in a crystalline AlN microring resonator. By utilizing ultrafast tuning of the pump frequency through single-sideband modulation, in combination with an optimized wavelength scan and pump power-ramp patterns, we can deterministically elongate a similar to 400 ns short-lived soliton to a time span as long as we wish to hold it. (C) 2018 Optical Society of America.
Soliton microcombs in silicon-carbide microresonators

Chengli Wang,Jin Li,Ailun Yi,Zhiwei Fang,Liping Zhou,Zhe Wang,Rui Niu,Jiaxiang Zhang,Ya Cheng,Junqiu Liu,Chun-Hua Dong,Xin Ou

DOI: https://doi.org/10.1109/tencon55691.2022.9977969

2022-01-01

Abstract:We demonstrate SiC-based soliton microcombs operated at room temperature - a key step for integrated SiC nonlinear photonics for frequency metrology applications. We have successfully routed and switched among different soliton states using an auxiliary laser to optically counteract the thermo-optic effect. In addition to single soliton generation, we further observe a wideband comb spectra translation from near-infrared to visible via the second-order nonlinearity, key for the realization of on-chip f -to-2f self-referencing,
Programmable switching of soliton microcomb states in a Si3N4 micro-resonator

Hongyi Zhang,Liangjun Lu,Jianping Chen,Linjie Zhou

DOI: https://doi.org/10.1117/12.2626590

2022-01-01

Abstract:Soliton microcombs, relying on the double balance of dispersion and nonlinearity, as well as gain and cavity loss, are formed in the mode-locked regime of a high-quality micro-resonator. Various soliton microcomb states can provide frequency components with different repetition rates and power, satisfying a variety of applications. Programmable switching of the soliton states increases operational flexibility. Here, we report the programmable switching of soliton microcomb states in a Si3N4 micro-resonator with anomalous dispersion by using an auxiliary laser. Red-detuned pump entrance is implemented to support the reliable judgement of state switching. Single-soliton state was realized in a small frequency tuning range of the auxiliary laser while multi-soliton states can be achieved under a wide range. The achievable soliton state number is related to the relative frequency position of the auxiliary laser. We can realize more number of the soliton states when the auxiliary laser is in the middle of the tuning range.
Using photonic crystal microrings to mitigate Raman-Kerr effects competition for soliton microcomb generation

Zongxing Lin,Dongmei Huang,Zihao Cheng,Wei Wu,P. K. A. Wai,Zhe Kang,Sailing He

DOI: https://doi.org/10.1109/jlt.2023.3302514

IF: 4.7

2023-01-01

Journal of Lightwave Technology

Abstract:In nonlinear microresonators with strong stimulated Raman scattering effect, it is difficult if not impossible to generate Kerr soliton microcombs with a small free spectral range (FSR) (< 100 GHz) due to the competition between the Raman and Kerr effects. In this paper, we overcome this limitation by using odd-period photonic crystal microrings (PCMs). Numerical simulations on the silicon-on-insulator (SOI) PCM show that a small frequency shift (5 GHz) induced by the photonic crystal structure can moderately suppress the Raman effect, such that chaotic microcombs with a small FSR can be generated. With a larger frequency shift (e.g. ≥ 10 GHz), the Raman effect is significantly suppressed, and the soliton microcombs can be generated. For comparison, without the frequency shift, only Raman lasing can be achieved in a conventional microring. To investigate the applicability of the proposed method in other material platforms, we carried out simulations for the aluminium nitride (AlN) PCM. The results are comparable to those obtained on the SOI PCM. Our method opens a new approach to the generation of small FSR Kerr soliton microcombs in microresonators with strong Raman effect, which is important for expanding the available nonlinear platforms and applications such as telecommunications, radio-frequency photonics, and astronomical spectrographs.

engineering, electrical & electronic,optics,telecommunications
Soliton formation and spectral translation into visible on CMOS-compatible 4H-silicon-carbide-on-insulator platform

Chengli Wang,Jin Li,Ailun Yi,Zhiwei Fang,Liping Zhou,Zhe Wang,Rui Niu,Yang Chen,Jiaxiang Zhang,Ya Cheng,Junqiu Liu,Chun-Hua Dong,Xin Ou

DOI: https://doi.org/10.1038/s41377-022-01042-w

2022-12-07

Abstract:Recent advancements in integrated soliton microcombs open the route to a wide range of chip-based communication, sensing, and metrology applications. The technology translation from laboratory demonstrations to real-world applications requires the fabrication process of photonics chips to be fully CMOS-compatible, such that the manufacturing can take advantage of the ongoing evolution of semiconductor technology at reduced cost and with high volume. Silicon nitride has become the leading CMOS platform for integrated soliton devices, however, it is an insulator and lacks intrinsic second-order nonlinearity for electro-optic modulation. Other materials have emerged such as AlN, LiNbO3, AlGaAs and GaP that exhibit simultaneous second- and third-order nonlinearities. Here, we show that silicon carbide (SiC) -- already commercially deployed in nearly ubiquitous electrical power devices such as RF electronics, MOSFET, and MEMS due to its wide bandgap properties, excellent mechanical properties, piezoelectricity and chemical inertia -- is a new competitive CMOS-compatible platform for nonlinear photonics. High-quality-factor microresonators (Q = 4 × 106) are fabricated on 4H-SiC-on-insulator thin films, where a single soliton microcomb is generated. In addition, we observe wide spectral translation of chaotic microcombs from near-infrared to visible due to the second-order nonlinearity of SiC. Our work highlights the prospects of SiC for future low-loss integrated nonlinear and quantum photonics that could harness electro-opto-mechanical interactions on a monolithic platform.
Perfect Soliton Crystals in the High-Q Microrod Resonator

Rui Niu,Shuai Wan,Zheng-Yu Wang,Jin Li,Wei-Qiang Wang,Wen-Fu Zhang,Guang-Can Guo,Chang-Ling Zou,Chun-Hua Dong

DOI: https://doi.org/10.1109/lpt.2021.3096645

IF: 2.6

2021-01-01

IEEE Photonics Technology Letters

Abstract:The coherent temporal soliton in optical microresonators has attracted great attention recently. Here, we have fabricated the microrod resonator with Q factor as high as 2×10 8 and demonstrated the dissipative Kerr soliton generation in such a microresonator, by utilizing an auxiliary-laser-assisted thermal response control. In addition, we have changed the pump laser and observed the perfect soliton crystals. With the simulation, we found that the perfect soliton crystals are generated based on the avoided mode crossing, which is affected by the pump resonance and pump power.
Thermal Tuning of Mode Crossing and the Perfect Soliton Crystal in a Si3N4 Microresonator

Jin Li,Shuai Wan,Jin-Lan Peng,Zheng-Yu Wang,Rui Niu,Chang-Ling Zou,Guang-Can Guo,Chun-Hua Dong

DOI: https://doi.org/10.1364/oe.450100

IF: 3.8

2022-01-01

Optics Express

Abstract:Dissipative Kerr solitons in high quality microresonators have attracted much attention in the past few years. They provide ideal platforms for a number of applications. Here, we fabricate the Si3N4 microring resonator with anomalous dispersion for the generation of single soliton and soliton crystal. Based on the strong thermal effect in the high-Q microresonator, the location and strength of the avoided mode crossing in the device can be changed by the intracavity power. Because the existence of the avoided mode crossing can induce the perfect soliton crystal with specific soliton number, we could choose the appropriate pumped resonance mode and appropriate pump power to obtain the perfect soliton crystals on demand.
Laser Soliton Microcombs Heterogeneously Integrated on Silicon

Chao Xiang,Junqiu Liu,Joel Guo,Lin Chang,Rui Ning Wang,Wenle Weng,Jonathan Peters,Weiqiang Xie,Zeyu Zhang,Johann Riemensberger,Jennifer Selvidge,Tobias J. Kippenberg,John E. Bowers

DOI: https://doi.org/10.1126/science.abh2076

IF: 56.9

2021-01-01

Science

Abstract:Silicon photonics enables wafer-scale integration of optical functionalities on chip. Silicon-based laser frequency combs can provide integrated sources of mutually coherent laser lines for terabit-per-second transceivers, parallel coherent light detection and ranging, or photonics-assisted signal processing. We report heterogeneously integrated laser soliton microcombs combining both indium phospide/silicon (InP/Si) semiconductor lasers and ultralow-loss silicon nitride (Si3N4) microresonators on a monolithic silicon substrate. Thousands of devices can be produced from a single wafer by using complementary metal-oxide-semiconductor-compatible techniques. With on-chip electrical control of the laser-microresonator relative optical phase, these devices can output single-soliton microcombs with a 100-gigahertz repetition rate. Furthermore, we observe laser frequency noise reduction due to self-injection locking of the InP/Si laser to the Si3N4 microresonator. Our approach provides a route for large-volume, low-cost manufacturing of narrow-linewidth, chip-based frequency combs for next-generation high-capacity transceivers, data centers, space and mobile platforms.
Gain-switched semiconductor laser driven soliton microcombs

Wenle Weng,Aleksandra Kaszubowska-Anandarajah,Jijun He,Prajwal D. Lakshmijayasimha,Erwan Lucas,Junqiu Liu,Prince M. Anandarajah,Tobias J. Kippenberg

DOI: https://doi.org/10.1038/s41467-021-21569-7

IF: 16.6

2021-03-03

Nature Communications

Abstract:Abstract Dissipative Kerr soliton generation using self-injection-locked III-V lasers has enabled fully integrated hybrid microcombs that operate in turnkey mode and can access microwave repetition rates. Yet, continuous-wave-driven soliton microcombs exhibit low energy conversion efficiency and high optical power threshold, especially when the repetition frequencies are within the microwave range that is convenient for direct detection with off-the-shelf electronics. Here, by actively switching the bias current of injection-locked III-V semiconductor lasers with switching frequencies in the X-band and K-band microwave ranges, we pulse-pump both crystalline and integrated microresonators with picosecond laser pulses, generating soliton microcombs with stable repetition rates and lowering the required average pumping power by one order of magnitude to a record-setting level of a few milliwatts. In addition, we unveil the critical role of the phase profile of the pumping pulses, and implement phase engineering on the pulsed pumping scheme, which allows for the robust generation and the stable trapping of solitons on intracavity pulse pedestals. Our work leverages the advantages of the gain switching and the pulse pumping techniques, and establishes the merits of combining distinct compact comb platforms that enhance the potential of energy-efficient chipscale microcombs.

multidisciplinary sciences
Soliton Microcombs in Integrated Chalcogenide Microresonators

Di Xia,Zelin Yang,Pingyang Zeng,Bin Zhang,Jiayue Wu,Zifu Wang,Jiaxin Zhao,Mingqi Gao,Yufei Huang,Jianteng Huang,Liyang Luo,Dong Liu,Shuixian Yang,Hairun Guo,Zhaohui Li

DOI: https://doi.org/10.48550/arXiv.2202.05992

2022-02-12

Optics

Abstract:Photonic integrated microcombs have enabled advanced applications in optical communication, microwave synthesis, and optical metrology, which in nature unveil an optical dissipative soliton pattern under cavity-enhanced nonlinear processes. The most decisive factor of microcombs lies in the photonic material platforms, where materials with high nonlinearity and in capacity of high-quality chip integration are highly demanded. In this work, we present a home-developed chalcogenide glasses-Ge25Sb10S65 (GeSbS) for the nonlinear photonic integration and for the dissipative soliton microcomb generation. Compared with the current integrated nonlinear platforms, the GeSbS features wider transparency from the visible to 11 um region, stronger nonlinearity, and lower thermo-refractive coefficient, and is CMOS compatible in fabrication. In this platform, we achieve chip-integrated optical microresonators with a quality (Q) factor above 2 x 10^6, and carry out lithographically controlled dispersion engineering. In particular, we demonstrate that both a bright soliton-based microcomb and a dark-pulsed comb are generated in a single microresonator, in its separated fundamental polarized mode families under different dispersion regimes. The overall pumping power is on the ten-milliwatt level, determined by both the high Q-factor and the high material nonlinearity of the microresonator. Our results may contribute to the field of nonlinear photonics with an alternative material platform for highly compact and high-intensity nonlinear interactions, while on the application aspect, contribute to the development of soliton microcombs at low operation power, which is potentially required for monolithically integrated optical frequency combs.
Efficient and Reconfigurable Soliton Microcomb Source Based on the 400-Nm-thick Si3N4 Platform

Hongyi Zhang,Liangjun Lu,Shuxiao Wang,Yan Cai,Jianping Chen,Linjie Zhou

DOI: https://doi.org/10.1109/jlt.2024.3478815

IF: 4.7

2024-01-01

Journal of Lightwave Technology

Abstract:Dark soliton microcombs with a high repetition rate and high line power can be generated in a nonlinear ring with normal group velocity dispersion (GVD), making them suitable for various applications. This study explores the impact of pump power, coupling coefficient, waveguide loss, and GVD on the dark soliton spectral profile, including the power level of the comb lines and the extent of the flat spectral range. A dark soliton microcomb is experimentally generated based on a 400-nmthick Si3N4 microring, demonstrating an off-chip -10-dBm bandwidth of 28 nm. Spectral reconstruction of the efficient dark soliton is also achieved. By changing the temperature by 2 °C, the -10-dBm bandwidth is varied from 23 nm to 28 nm and the spectral flatness is modified. Furthermore, the comb spacing of the generated dark soliton can be changed from one free spectral range (FSR) to three FSRs by properly adjusting the pump power and wavelength. The proposed scheme offers a straightforward method for creating an efficient soliton microcomb source with a customizable spectral shape on the 400-nm-thick Si3N4 platform, suitable for a variety of applications
Photonic dissipation control for Kerr soliton generation in strongly Raman-active media

Zheng Gong,Ming Li,Xianwen Liu,Yuntao Xu,Juanjuan Lu,Alexander Bruch,Joshua B. Surya,Changling Zou,Hong X. Tang

DOI: https://doi.org/10.1103/PhysRevLett.125.183901

2020-09-30

Abstract:Microcavity solitons enable miniaturized coherent frequency comb sources. However, the formation of microcavity solitons can be disrupted by stimulated Raman scattering (SRS), particularly in the emerging crystalline microcomb materials with high Raman gain. Here, we propose and implement dissipation control---tailoring the energy dissipation of selected cavity modes---to purposely raise/lower the threshold of Raman lasing in a strongly Raman-active lithium niobate microring resonator, and realize on-demand soliton mode-locking or Raman lasing. Numerical simulations are carried out to confirm our analyses and agree well with experiment results. Our work demonstrates an effective approach to address strong SRS for microcavity soliton generation.

Optics,Applied Physics

Reconfigurable Soliton Crystals in Integrated Microresonators

Soliton Crystals in 4H-Silicon Carbide-on-insulator-based Integrated Optical Microring Resonator

Leveraging reconfigurable micro-resonator soliton crystals for Intensity-Modulated Direct Detection Data Transmission

Synthesized soliton crystals

Fabrication of the High-Q Si 3 N 4 Microresonators for Soliton Microcombs

Soliton Microcomb Generation in a III-V Photonic Crystal Cavity

Perfect soliton crystals on demand

IMDD Data Transmission with Microresonator Soliton Crystals

Perfect Soliton Crystal Linear-Wave Scattering in a Si3N4 Microring Resonator

High-fidelity Cavity Soliton Generation in Crystalline AlN Micro-Ring Resonators.

Soliton microcombs in silicon-carbide microresonators

Programmable switching of soliton microcomb states in a Si3N4 micro-resonator

Using photonic crystal microrings to mitigate Raman-Kerr effects competition for soliton microcomb generation

Soliton formation and spectral translation into visible on CMOS-compatible 4H-silicon-carbide-on-insulator platform

Perfect Soliton Crystals in the High-Q Microrod Resonator

Thermal Tuning of Mode Crossing and the Perfect Soliton Crystal in a Si3N4 Microresonator

Laser Soliton Microcombs Heterogeneously Integrated on Silicon

Gain-switched semiconductor laser driven soliton microcombs

Soliton Microcombs in Integrated Chalcogenide Microresonators

Efficient and Reconfigurable Soliton Microcomb Source Based on the 400-Nm-thick Si3N4 Platform

Photonic dissipation control for Kerr soliton generation in strongly Raman-active media