Abstract:Performance degradation of lithium-ion batteries (LIBs) from in-service abuse was analyzed using novel dynamic abuse tests and sensor-based in-situ monitoring of battery state of health (SOH). The relation between dynamic impact and structure changes of LiCoO2 (LCO) electrode was analyzed through a nano-impact test directly applied to the electrode and Raman imaging. After the electrode structure damage induced by the dynamic loading was analyzed, the performance of the LIBs with the abused electrodes was evaluated to establish the relation between the number of impact cycles and LIB performance degradation. The mechanism of impact related LIB capacity decrease was analyzed, and the capacity change can be predicted based on the impact abuse history using this approach. In order to provide more detailed information on the battery performance degradation caused by the in-service dynamic loads, a dynamic aging testing platform was designed to simulate in-service vibration and impact experienced by the LIBs. Based on the lessons learned, a sensor network was constructed to provide a comprehensive in-situ evaluation of the SOH of commercial batteries. Mechanisms of LIB capacity fade, temperature increase, and cell deformation from cycling in representative dynamic environments were analyzed and correlated with theoretical predictions. Difference between the aging of a battery pack and that of a single cell was also investigated, which presented the influence of current imbalance on the SOH decay of battery packs. SEM imaging, Raman imaging, and electrochemical impedance spectroscopy (EIS) analysis were also applied to support the sensor network measurements. In order to provide an early detection of catastrophic LIB failure such as thermal runaway, an internal resistance temperature detector (RTD) based electrode temperature monitoring approach was developed. By embedding the RTD into LIBs with 3D printing technique, electrode temperature can be collected during ordinary cycling and electrical abuse of LIBs, such as external short circuit and overcharge. The internal RTD presented high measuring efficiency, while there was no interference between the sensor measurement and battery operation. The internal RTD detected the short circuit event and overcharge failure prior of time: the efficiency of the internal RTD was 6-10 times higher than the external RTD in the short circuit test. This provided the chance for early detection and prevention of catastrophic LIB failures. Besides, with the detailed information on electrode temperature evolution during LIB thermal runaway available, the internal RTD also provided the chance to enhance the understanding of the thermal runaway mechanism.

Research on Internal Temperature and Strain of Soft-packed Batteries under Overcharging Conditions Based on Built-in Fiber Bragg Grating Sensors

Operando temperature monitoring through optical fiber sensor in lithium-ion battery

Temperature field monitoring of lithium battery pack based on double-clad fiber Bragg grating sensor

Characterization of Temperature and Strain Changes in Lithium-Ion Batteries Based on a Hinged Differential Lever Sensitization Fiber Bragg Grating Strain–Temperature Simultaneous-Measurement Sensor

Real-Time Monitoring of Temperature Field Distribution of Three-Element LiB Lithium Battery Using FBG Arrays

Design and Experiment of FBG Sensors for Temperature Monitoring on External Electrode of Lithium-Ion Batteries

High Precision Strain Monitoring for Lithium Ion Batteries Based on Fiber Bragg Grating Sensors

Revealing the Relationship Between External Pressure and Lithium Plating of Pouch Lithium-Ion Batteries Based on In-Situ Impedance and Relaxation Voltage

External Electrode Temperature Monitoring of Lithium Iron Phosphate Batteries Based on Fiber Bragg Grating Sensors

EXAMINATION OF LITHIUM-ION BATTERY PERFORMANCE DEGRADATION UNDER DYNAMIC ENVIRONMENT AND EARLY DETECTION OF THERMAL RUNAWAY WITH INTERNAL SENSOR MEASUREMENT

Recent Progress in Lithium-Ion Battery Safety Monitoring Based on Fiber Bragg Grating Sensors

An overview on in situ / operando battery sensing methodology through thermal and stress measurements

Monitoring the Strain Evolution of Lithium‐Ion Battery Electrodes using an Optical Fiber Bragg Grating Sensor

Advancements in Battery Monitoring: Harnessing Fiber Grating Sensors for Enhanced Performance and Reliability

Design and Investigation of a Sensitivity-Enhanced Fiber Bragg Grating Sensor for Micro-Strain Measurement

Diffusion-Induced Transient Stresses in Li-Battery Electrodes Imaged by Electrochemical Quartz Crystal Microbalance with Dissipation Monitoring and Environmental Scanning Electron Microscopy

Design of a Sensitivity-Enhanced FBG Strain Sensor and Its Application in State Estimation for Lithium-Ion Battery

Non-Damaged Lithium-Ion Batteries Integrated Functional Electrode for Operando Temperature Sensing

Simultaneous Strain and Temperature Discrimination in 18650 Li-ion Batteries Using Polarization-Maintaining Fiber Bragg Gratings

In operando measuring circumferential internal strain of 18650 Li-ion batteries by thin film strain gauge sensors

Revealing the Electrochemical-Mechanical Correspondence Between Electrode Films and 20 Ah Prismatic Li-ion Batteries Via Optical Fiber Monitoring