Abstract:Performance degradation of lithium-ion batteries (LIBs) from in-service abuse was analyzed using novel dynamic abuse tests and sensor-based in-situ monitoring of battery state of health (SOH). The relation between dynamic impact and structure changes of LiCoO2 (LCO) electrode was analyzed through a nano-impact test directly applied to the electrode and Raman imaging. After the electrode structure damage induced by the dynamic loading was analyzed, the performance of the LIBs with the abused electrodes was evaluated to establish the relation between the number of impact cycles and LIB performance degradation. The mechanism of impact related LIB capacity decrease was analyzed, and the capacity change can be predicted based on the impact abuse history using this approach. In order to provide more detailed information on the battery performance degradation caused by the in-service dynamic loads, a dynamic aging testing platform was designed to simulate in-service vibration and impact experienced by the LIBs. Based on the lessons learned, a sensor network was constructed to provide a comprehensive in-situ evaluation of the SOH of commercial batteries. Mechanisms of LIB capacity fade, temperature increase, and cell deformation from cycling in representative dynamic environments were analyzed and correlated with theoretical predictions. Difference between the aging of a battery pack and that of a single cell was also investigated, which presented the influence of current imbalance on the SOH decay of battery packs. SEM imaging, Raman imaging, and electrochemical impedance spectroscopy (EIS) analysis were also applied to support the sensor network measurements. In order to provide an early detection of catastrophic LIB failure such as thermal runaway, an internal resistance temperature detector (RTD) based electrode temperature monitoring approach was developed. By embedding the RTD into LIBs with 3D printing technique, electrode temperature can be collected during ordinary cycling and electrical abuse of LIBs, such as external short circuit and overcharge. The internal RTD presented high measuring efficiency, while there was no interference between the sensor measurement and battery operation. The internal RTD detected the short circuit event and overcharge failure prior of time: the efficiency of the internal RTD was 6-10 times higher than the external RTD in the short circuit test. This provided the chance for early detection and prevention of catastrophic LIB failures. Besides, with the detailed information on electrode temperature evolution during LIB thermal runaway available, the internal RTD also provided the chance to enhance the understanding of the thermal runaway mechanism.

Non-Damaged Lithium-Ion Batteries Integrated Functional Electrode for Operando Temperature Sensing

Operando temperature monitoring through optical fiber sensor in lithium-ion battery

Operando monitoring Lithium-ion battery temperature via implanting femtosecond-laser-inscribed optical fiber sensors

Operando Monitoring of Internal Temperature in Lithium-Ion Battery Enabled by Wireless Implantable Sensor with Ultrasonic Communication

Implantable Flexible Temperature Sensor for In-Operando Sensing of Lithium-ion Batteries

Temperature-Tunable Operando Nondestructive Detection of Electronic and Geometrical Structures in Battery Electrodes.

In Situ Monitoring of Cycling Characteristics in Lithium-Ion Battery Based on a Two-Cavity Cascade Fiber-Optic Fabry-Perot Interferometer

Robust Ionics Reinforced Fiber As Implantable Sensor for Early Operando Monitoring Cell Thermal Safety of Commercial Lithium-Ion Batteries.

A novel embedded method for in-situ measuring internal multi-point temperatures of lithium ion batteries

Real-time monitoring of internal structural deformation and thermal events in lithium-ion cell via embedded distributed optical fibre

EXAMINATION OF LITHIUM-ION BATTERY PERFORMANCE DEGRADATION UNDER DYNAMIC ENVIRONMENT AND EARLY DETECTION OF THERMAL RUNAWAY WITH INTERNAL SENSOR MEASUREMENT

External Electrode Temperature Monitoring of Lithium Iron Phosphate Batteries Based on Fiber Bragg Grating Sensors

Operando monitoring of dendrite formation in lithium metal batteries via ultrasensitive tilted fiber Bragg grating sensors

Unlocking Cell Chemistry Evolution with Operando Fibre Optic Infrared Spectroscopy in Commercial Na(Li)-ion Batteries

Design and Experiment of FBG Sensors for Temperature Monitoring on External Electrode of Lithium-Ion Batteries

Functional Optical Fiber Sensors Detecting Imperceptible Physical/Chemical Changes for Smart Batteries

High-Fidelity Strain and Temperature Measurements of Li-Ion Batteries Using Polymer Optical Fiber Sensors

Operando decoding of chemical and thermal events in commercial Na(Li)-ion cells via optical sensors

Operando monitoring of ion activities in aqueous batteries with plasmonic fiber-optic sensors

Ratiometric fluorescence optical fiber enabling operando temperature monitoring in pouch‐type battery

Operando Battery Monitoring: Lab‐on‐Fiber Electrochemical Sensing Technologies (laser Photonics Rev. 18(9)/2024)