Preparation of Metallized Pellets for Steelmaking by Hydrogen Cooling Reduction with Different Cooling Rates
Guanwen Luo,Zhiwei Peng,Kangle Gao,Wanlong Fan,Ran Tian,Lingyun Yi,Mingjun Rao
DOI: https://doi.org/10.3390/ma17174362
IF: 3.4
2024-09-04
Materials
Abstract:To utilize the sensible heat of hot roasted iron ore pellets with no CO2 emission in the production of metallized pellets for direct steelmaking, the pellets were reduced in H2 during their cooling process with variable cooling rates. When the cooling rate decreased from 5.2 °C/min to 2.0 °C/min, the total iron content, reduction degree, and iron metallization degree of the pellets increased continuously from 74.0 wt%, 52%, and 31.1% to 84.9 wt%, 93.4%, and 89.2%, respectively. However, the compressive strength of the pellets increased initially from 2100 N/p to 2436 N/p and then decreased considerably to 841 N/p. As the cooling rate decreased, more Fe2O3 was reduced to Fe with diminishing FeO and Fe2SiO4. The porosity of the pellets increased from 23.9% to 54.3%, with higher distribution uniformity of pores. The morphology of metallic iron particles also transited from a layered form to a spherical form and lastly to a porous reticular form. Meanwhile, the metallic iron particles in the pellets grew evidently with more uniform distributions. When the cooling rate was 3.7 °C/min, the resulting metallized pellets had the reduction degree of 74.2%, iron metallization degree of 66.9%, and the highest compressive strength of 2436 N/p, in association with the spherical morphology and relatively large size of metallic iron particles.
materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering