Abstract:The realization of the necessary energy-efficient technological solutions for the production of highly porous SiC-ceramic materials requires appropriate research. The results of developing energy-efficient one-step methods for the synthesis of porous SiC-based ceramics and studying the characteristics of the obtained ceramics are presented. The effect of the morphology of initial powders on the synthesized product is considered. Ultrafine silicon carbide powders of two types, identical in characteristic particle size, but quite different in the surface morphology, were used as fillers in the synthesis of experimental samples of porous ceramics. The first one was obtained by the traditional furnace method (SiC f ), the second one was synthesized by the technology of self-propagating high-temperature synthesis (SiC shs ). It is shown that the particle morphology of initial powder components determines the structural parameters and characteristics of synthesized porous ceramics. The pore space parameters (average pore size, specific surface area, equivalent hydraulic diameter, permeability, etc.) can vary significantly. Porous ceramic materials synthesized on the basis of SiC f have an open porosity of 47%, high liquid permeability (up to 2 mDarcy), overwhelming dominance of α-SiC phase, and a narrow pore distribution with an average pore size of about 1 μm. High open porosity (more than 58 %), highly developed nanostructured pore space surface with an area of more than 12 m 2 /g, and wider pore size distribution (average pore size — 140 nm) are observed in porous ceramic materials based on SiC shs . The obtained results can be used to improve energy-efficient synthesis technologies and methods for predicting the properties of highly porous SiC-based ceramic materials. This will make it possible to create highly porous SiC ceramics within a priory predicted limits of effective applicability for the processes of ultrafiltration or catalysis.

Ultra-low Energy Consumption of Preparing Unidirectional Porous Si3N4 3 N 4 Ceramics Via Freeze Casting and Combustion Synthesis

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Preparation and properties of high-porosity ZrB2-SiC ceramics by water-based freeze casting

Study of the effect of the morphology of initial powders on the structural and dimensional characteristics of SiC-based porous ceramic materials

Microstructure and properties of porous Si3N4 ceramics by gelcasting-self-propagating high-temperature synthesis (SHS)

Freeze casting of arbitrary‐shaped porous ceramics

Fabrication of high permeability SiC ceramic membrane with gradient pore structure by one-step freeze-casting process

Microstructure, Mechanical and Dielectric Properties of Highly Porous Silicon Nitride Ceramics Produced by a New Water-Based Freeze Casting

In-situ Reaction Synthesis of Porous Si2N2O-Si3N4 Multiphase Ceramics with Low Dielectric Constant Via Silica Poly-Hollow Microspheres

Preparation and properties of ultralight fibrous β-Si3N4 3D scaffolds with honeycomb-like structure by directional freeze-casting

Multi-directional freeze casting of porous ceramics with bone-inspired microstructure

Porous SiC using polycarbosilane/camphene solutions: Roles of freeze casting parameters

Innovative Application of PVA Hydrogel for the Forming of Porous Si3N4 Ceramics Via Freeze-Thaw Technique

Si3N4 Hollow Microsphere Toughened Porous Ceramics from Direct Coagulation Method Via Dispersant Reaction

Highly Porous SiC Cellular Ceramics for Efficient High-Temperature PM Removal

A non-sintering fabrication method for porous Si3N4 ceramics via sol hydrothermal process

Ultrahigh-Strength Porous Ceramic Composites via a Simple Directional Solidification Process

Microstructures, Mechanical Properties and Electromagnetic Wave Absorption Performance of Porous SiC Ceramics by Direct Foaming Combined with Direct-Ink-Writing-Based 3D Printing

Hierarchically porous Al2TiO5 ceramics via freeze-gel casting

Novel porous Si3N4 ceramics prepared by aqueous gelcasting using Si3N4 poly-hollow microspheres as pore-forming agent

Porous Si3N4 ceramics with hierarchical pore structures prepared by gelcasting using DMAA as gelling agent and PS as pore–forming agent