Abstract:Transfemoral amputees demand a mechatronic lower limb prosthesis as technical substitute for restoring their gait functions. Prosthetic knee is the key component of a transfemoral prosthesis. The performance of the prosthetic knee determines the walking ability of the transfemoral amputee. This study proposed a novel microprocessor-controlled prosthetic knee with hydraulic damper and evaluated the performance of the prosthetic knee by function simulation and evaluation platform. The prosthetic knee with electrical-controlled hydraulic cylinder that could modulate knee flexion and extension damping properties independently and continuously by single motor was designed. Gait phase identification system based on knee angle sensor, inertial measurement units mounted on thigh connector and shank and force transducer embedded in shank was proposed. Gait phase identification and damping control strategy were determined by typical gait events during walking. Speed adaption and gait symmetry tests were conducted with a customized gait simulator to evaluate the performance of the proposed microprocessor-controlled prosthetic knee. The angle trajectories of the prosthetic knee were similar under a range of walking speeds. While the symmetry index values indicated that the stance phase was more asymmetry than swing phase, the peak swing flexion knee angles were consistently controlled between 60-70 degrees under different speeds. The knee angle symmetry was observed in different speeds during swing phase. It is suggested that the proposed microprocessor-controlled prosthetic knee could meet the fundamental demands of walking with smooth angular transition across different walking speeds.

Design and Simulation of a Passive Transfemoral Prosthesis with Bi-functional Muscles Characterisitcs

Modeling and simulation of humanoid lower limb based on Pneumatic Artificial Muscle

Modeling, Simulation and Kinematic Validation of Transfemoral Prosthetic Mechanism with Ankle Varus-Valgus Characteristic

Gait-based Design and Human-machine Simulation of a Powered Hybrid Transfemoral Prosthetic Mechanism

Dynamic analysis of humanoid lower limb based on PAM

Design Method and Verification of a Hybrid Prosthetic Mechanism with Energy-Damper Clutchable Device for Transfemoral Amputees

Design, Simulation and Kinematic Validation of a Hip Prosthetic Mechanism with a Multimotor Function

An Active-passive Lightweight Prosthesis Simulating Normal Human Walking Gait

Bio-Mimetic Joint Actuator Imitating the Function of Human Knee

On the Design of a Powered Transtibial Prosthesis with Stiffness Adaptable Ankle and Toe Joints.

Bionics Design of Artificial Leg and Experimental Modeling Research of Pneumatic Artificial Muscles

Dynamic Analysis and Performance Verification of a Novel Hip Prosthetic Mechanism

The control methods of Knee‐Ankle‐Toe Active Transfemoral Prosthesis in stance phase

A 3-D Model To Simulate The Gait Of Trans-Femoral Prosthesis Users

A robotic emulator for the systematic exploration of transtibial biarticular prosthesis designs

Design and Evaluation of a Smooth-Locking-Based Customizable Prosthetic Knee Joint

Design of bionic active–passive hybrid-driven prosthesis based on gait analysis and simulation of compound control method

Design, Simulation and Kinematic Verification of a Multi-Loop Ankle-Foot Prosthetic Mechanism

Design of a biologically inspired lower limb exoskeleton for human gait rehabilitation

Design and Evaluation of a Novel Microprocessor-Controlled Prosthetic Knee

Mechanism and Controller Design of a Transfemoral Prosthesis with Electrohydraulic Knee and Motor-Driven Ankle