Abstract:In situ polymerization is proposed to design high ionic conductivity and good interface contact solid polymer electrolytes. The constructed LiFePO4 (LFP) || Li cells with elaborately designed electrolyte exhibit 100% capacity retention after 100 cycles at −10 °C. The electrochemical stability of electrolyte is further enhanced by cyanoacrylate decoration. And the constructed LiCoO2 (LCO) || Li cell with modified electrolyte shows 93% of capacity retention under 4.5 V cut‐off voltage after 200 cycles. Solid‐state electrolytes (SSE) exhibit great promise in enhancing the safety of Li metal batteries by replacing flammable liquid electrolytes. However, the practical application of SSE is hampered mainly due to the poor electrode–electrolyte interface, low ion conductivity, and inferior electrochemical stability. Herein, superior nonflammable solid polymer electrolytes are elaborately designed by in situ encapsulating succinonitrile (SN)‐based deep eutectic solvent (DES) into the ethoxylated trimethylolpropane triacrylate (ETPTA) matrix (DES‐ETPTA). Benefiting from strong polarity and high anti‐oxidation capability, as‐prepared DES‐ETPTA electrolyte shows high ionic conductivity (9.55 × 10−4 S cm−1 at 30 °C), high Li+ transference number (0.68), and good electrochemical stability. As a result, the assembled LiFePO4 || Li full cells based on the designed DES‐ETPTA electrolyte deliver a high reversible capacity and capacity retention at −10 °C and room temperature. Furthermore, considering the compatibility with high‐voltage layered oxide cathode, the electrochemical stability of the ETPTA is further improved through the decoration of cyanoacrylate (CA) with strong electron‐withdrawing characteristic of C≡N. Consequently, the constructed 4.5 V LiCoO2 || Li full cells using DES‐ETPTA‐CA electrolyte deliver a high reversible capacity of 144 mAh g−1 and a superior retention rate of 93% after 200 cycles at 0.5 C. This work paves a new pathway to design high‐safety and high‐voltage solid polymer electrolytes for lithium metal batteries.

A Shear-Thickening Fluid Based on Ionic Liquid As Dual-Safe Electrolyte for Lithium Batteries

Shear Thickening, Star-Shaped Polymer Electrolytes for Lithium-Ion Batteries

A Novel Zwitterionic Ionic Liquid-Based Electrolyte for More Efficient and Safer Lithium-Sulfur Batteries.

Recent Advances in Li1+xAlxTi2−x(PO4)3 Solid-State Electrolyte for Safe Lithium Batteries

Silica-based Ionogel Electrolyte with Porous Flower-Like Structure Enables Safer Lithium Ion Battery

Poly(ionic Liquid)-Polyethylene Oxide Semi-Interpenetrating Polymer Network Solid Electrolyte for Safe Lithium Metal Batteries

A siloxane-based self-healing gel electrolyte with deep eutectic solvents for safe quasi-solid-state lithium metal batteries

An Unprecedented Fireproof, Anion‐Immobilized Composite Electrolyte Obtained via Solidifying Carbonate Electrolyte for Safe and High‐Power Solid‐State Lithium‐Ion Batteries

High-Safety Electrolytes with an Anion-Rich Solvation Structure Tuned by Difluorinated Cations for High-Voltage Lithium Metal Batteries

Ameliorating Phosphonic-Based Nonflammable Electrolytes Towards Safe and Stable Lithium Metal Batteries

Nonflammable electrolyte with low exothermic design for safer lithium-based batteries

Preparation And Properties Of Ionic-Liquid Mixed Solutions As A Safety Electrolyte For Lithium Ion Batteries

In-situ encapsulating flame-retardant phosphate into robust polymer matrix for safe and stable quasi-solid-state lithium metal batteries

Fluorinated Carbonate‐Aided Ionic‐Liquid Electrolyte Enables High‐Capacity Lithium Metal Batteries

Electrolyte Mixtures Based on Ethylene Carbonate and Dimethyl Sulfone for Li-Ion Batteries with Improved Safety Characteristics

Ultrathin, flexible, solid polymer composite electrolyte enabled with aligned nanoporous host for lithium batteries

Progress of Enhancing the Safety of Lithium Ion Battery from the Electrolyte Aspect

Multifunctional single-solvent electrolytes for safe and stable Li metal batteries

Quasi-Solid-State Electrolyte Synthesized Using a Thiol-Ene Click Chemistry for Rechargeable Lithium Metal Batteries with Enhanced Safety.

Thermal stable poly-dioxolane based electrolytes via a robust crosslinked network for dendrite-free solid-state li-metal batteries

Deep Eutectic Solvent‐Based Solid Polymer Electrolytes for High‐Voltage and High‐Safety Lithium Metal Batteries