Abstract:In situ polymerization is proposed to design high ionic conductivity and good interface contact solid polymer electrolytes. The constructed LiFePO4 (LFP) || Li cells with elaborately designed electrolyte exhibit 100% capacity retention after 100 cycles at −10 °C. The electrochemical stability of electrolyte is further enhanced by cyanoacrylate decoration. And the constructed LiCoO2 (LCO) || Li cell with modified electrolyte shows 93% of capacity retention under 4.5 V cut‐off voltage after 200 cycles. Solid‐state electrolytes (SSE) exhibit great promise in enhancing the safety of Li metal batteries by replacing flammable liquid electrolytes. However, the practical application of SSE is hampered mainly due to the poor electrode–electrolyte interface, low ion conductivity, and inferior electrochemical stability. Herein, superior nonflammable solid polymer electrolytes are elaborately designed by in situ encapsulating succinonitrile (SN)‐based deep eutectic solvent (DES) into the ethoxylated trimethylolpropane triacrylate (ETPTA) matrix (DES‐ETPTA). Benefiting from strong polarity and high anti‐oxidation capability, as‐prepared DES‐ETPTA electrolyte shows high ionic conductivity (9.55 × 10−4 S cm−1 at 30 °C), high Li+ transference number (0.68), and good electrochemical stability. As a result, the assembled LiFePO4 || Li full cells based on the designed DES‐ETPTA electrolyte deliver a high reversible capacity and capacity retention at −10 °C and room temperature. Furthermore, considering the compatibility with high‐voltage layered oxide cathode, the electrochemical stability of the ETPTA is further improved through the decoration of cyanoacrylate (CA) with strong electron‐withdrawing characteristic of C≡N. Consequently, the constructed 4.5 V LiCoO2 || Li full cells using DES‐ETPTA‐CA electrolyte deliver a high reversible capacity of 144 mAh g−1 and a superior retention rate of 93% after 200 cycles at 0.5 C. This work paves a new pathway to design high‐safety and high‐voltage solid polymer electrolytes for lithium metal batteries.

Electrolyte Mixtures Based on Ethylene Carbonate and Dimethyl Sulfone for Li-Ion Batteries with Improved Safety Characteristics

A Safe Electrolyte Enriched with Flame-Retardant Solvents for High-Voltage LiCoO2||Graphite Pouch Cells

A Novel Zwitterionic Ionic Liquid-Based Electrolyte for More Efficient and Safer Lithium-Sulfur Batteries.

Carbonate Solvents and Ionic Liquid Mixtures as an Electrolyte to Improve Cell Safety in Sodium-Ion Batteries

A Nonflammable Diethyl Ethylphosphonate-Based Electrolyte Improved by Synergistic Effect of Lithium Difluoro(Oxalato)Borate and Fluoroethylene Carbonate

Design and Mechanism Study of High-Safety and Long-Life Electrolyte for High-Energy-Density Lithium-Ion Batteries

High-Safety Electrolytes with an Anion-Rich Solvation Structure Tuned by Difluorinated Cations for High-Voltage Lithium Metal Batteries

Fluorinated Carbonate‐Aided Ionic‐Liquid Electrolyte Enables High‐Capacity Lithium Metal Batteries

Concentrated LiFSI–Ethylene Carbonate Electrolytes and Their Compatibility with High-Capacity and High-Voltage Electrodes

Triple Salts Electrolyte for High Cyclability and High Capability in Practical Safe Nickel-Rich Batteries

Solid-State Interphases Design for High-Safety, High-Voltage and Long-Cyclability Practical Batteries via Ethylene Carbonate-Free Electrolytes

Fluorinated Cyclic Ether Co-solvents for Ultra-high-Voltage Practical Lithium-Metal Batteries

Deep Eutectic Solvent‐Based Solid Polymer Electrolytes for High‐Voltage and High‐Safety Lithium Metal Batteries

Understanding the Role of Imide‐Based Salts and Borate‐Based Additives for Safe and High‐Performance Glyoxal‐Based Electrolytes in Ni‐Rich NMC811 Cathodes for Li‐Ion Batteries.

A Safe Ether Electrolyte Enabling High‐Rate Lithium Metal Batteries

An Unprecedented Fireproof, Anion‐Immobilized Composite Electrolyte Obtained via Solidifying Carbonate Electrolyte for Safe and High‐Power Solid‐State Lithium‐Ion Batteries

Advanced Low-Flammable Pyrrole Ionic Liquid Electrolytes for High Safety Lithium-Ion Batteries

Design of Fire‐Resistant Liquid Electrolyte Formulation for Safe and Long‐Cycled Lithium‐Ion Batteries

Doping in Solvation Structure: Enabling Fluorinated Carbonate Electrolyte for High-Voltage and High-Safety Lithium-Ion Batteries

Dimethyl methylphosphonate-based nonflammable electrolyte and high safety lithium-ion batteries

Manipulating Electrolyte and Solid Electrolyte Interphase to Enable Safe and Efficient Li-S Batteries