Abstract:To achieve stable cycling of high-energy-density and high-voltage anode-free lithium metal batteries, the interfacial stability of both lithium metal anode and high-voltage cathode is demanded. Electrolytes based on ether solvents tend to have excellent compatibility with the lithium metal anode, but due to their low oxidation potential (generally less than 4.0 V vs. Li+/Li), they render high-voltage LiNi0.8Co0.1Mn0.1O2 (NCM811) cathodes unsatisfactory electrochemical performance. Here, an average Coulombic efficiency of 99.4% is realized for lithium metal plating-striping by using an ether-based local high-concentration electrolyte. By further intro-ducing a minute amount of lithium difluoro(oxalate)borate (LiDFOB) additive (0.02 M) into this baseline elec-trolyte, its oxidation stability is increased to 4.3 V without compromising its high Coulombic efficiency towards reversible lithium plating-striping. Consequently, this additive-supported electrolyte enables the high-loading (3.0 mAh cm-2) Cu||NCM811 anode-free cells to achieve high-capacity retention at both room temperature (-95% capacity retention after 50 cycles) and-20 C (-79% capacity retention after 30 cycles). A combination of microscopic and spectroscopic investigations aided by theoretical calculations demonstrate that the LiDFOB additive helps generate a Li3N-and LiF-rich solid electrolyte interphase on the lithium metal anode side, enabling dense and uniform lithium deposition, meanwhile, it also leads to a uniform and compact cathode electrolyte interphase on the high-voltage NCM811 cathode side, mitigating the transition metals dissolution. This work provides a simple and promising strategy for the electrolyte design of high-voltage anode-free batteries.

Triple Salts Electrolyte for High Cyclability and High Capability in Practical Safe Nickel-Rich Batteries

Synergistic Dual-Additive Regulated Carbonate Electrolyte Stabilizes Bidirectional Interface for Aggressive Ni-rich Li-metal Full Batteries

Electrochemical performance and thermal stability analysis of LiNixCoyMnzO2 cathode based on a composite safety electrolyte

Enhancing the Intrinsic Safety of Nickel-Rich Lithium-Ion Batteries by an Ethylene Carbonate-Free Electrolyte with Ethoxy(pentafluoro) Cyclotriphosphazene Additive

Synergistic Dual-Salt Electrolyte for Safe and High-Voltage LiNi0.8Co0.1Mn0.1O2//Graphite Pouch Cells

Solid-State Interphases Design for High-Safety, High-Voltage and Long-Cyclability Practical Batteries via Ethylene Carbonate-Free Electrolytes

High‐Voltage and High‐Safety Practical Lithium Batteries with Ethylene Carbonate‐Free Electrolyte

A Nonflammable Diethyl Ethylphosphonate-Based Electrolyte Improved by Synergistic Effect of Lithium Difluoro(Oxalato)Borate and Fluoroethylene Carbonate

Electrolyte Design for Stable Electrode-Electrolyte Interphase to Enable High-Safety and High-Voltage Batteries

Design and Mechanism Study of High-Safety and Long-Life Electrolyte for High-Energy-Density Lithium-Ion Batteries

Tuning the Interface Stability of Nickel-Rich NCM Cathode Against Aggressive Structural Collapse via the Synergistic Effect of Additives

Toward a High-Voltage Practical Lithium Ion Batteries with Ultraconformal Interphases and Enhanced Battery Safety

Engineering A Boron‐Rich Interphase with Nonflammable Electrolyte Towards Stable Li||NCM811 Cells Under Elevated Temperature

In Situ Inorganic-Rich Electrode–Electrolyte Interphases for Safer 4.5 V Gr||NCM811 Batteries Enabled by an Ethylene Carbonate-Free Electrolyte

A Quasi‐Double‐Layer Solid Electrolyte with Adjustable Interphases Enabling High‐Voltage Solid‐State Batteries

Electrolyte Engineering to Construct Robust Interphase with High Ionic Conductivity for Wide Temperature Range Lithium Metal Batteries

Engineering A Boron-Rich Interphase with Nonflammable Electrolyte Toward Stable Li||NCM811 Cells under Elevated Temperature

An Additive-Enabled Ether-Based Electrolyte to Realize Stable Cycling of High-Voltage Anode-Free Lithium Metal Batteries

Stable Cycling of High-Voltage Lithium-Metal Batteries Enabled by High-Concentration FEC-Based Electrolyte

Doping in Solvation Structure: Enabling Fluorinated Carbonate Electrolyte for High-Voltage and High-Safety Lithium-Ion Batteries

High-voltage and high-safety nickel-rich layered cathode enabled by a self-reconstructive cathode/electrolyte interphase layer