Abstract:This work proposes a wide‐temperature localized high‐concentration electrolytes (LHCE) with a high safety feature. A particular electrolyte additive of the electrolytes, 1‐fluoroethyl methyl carbonate (1FEMC), is explored to improve the performance of electrolytes with a better interfacial stability than the previously reported multifunctional additive (4,5‐difluoro‐1,3‐dioxolan‐2‐one DFEC). The 1FEMC achieves an inorganic‐dominated solid electrolyte interphase at both cathode and anode, which leads to an uniform lithium deposition and inhibits the electrolyte decomposition as well as cathode degradation. This LHCE achieves over 300 stable cycles for both LiNi0.9Mn0.05Co0.05O2||Li cells and LiCoO2||Li cells, as well as 50 cycles for LiNi0.8Mn0.1Co0.1O2 (NCM811||Li) pouch cells. Additionally, NCM811||Li cells maintains 84% discharge capacity at −20 °C (compared with that at room temperature). This work presents a research foundation for designing safer Li‐metal batteries that operate in a wide temperature range. The increasing need for energy storage devices with high energy density has led to significant interest in Li‐metal batteries (LMBs). However, the use of commercial electrolytes in LMBs is problematic due to their flammability, inadequate performance at low temperatures, and tendency to promote the growth of lithium dendrites and other flaws. This study introduces a localized high‐concentration electrolyte (LHCE) that addresses these issues by employing non‐flammable electrolyte components and incorporating carefully designed additives to enhance flame retardancy and low‐temperature performance. By incorporating additives to optimize the electrolyte, it is possible to attain inorganic‐dominated solid electrolyte interphases on both the cathode and anode. This achievement results in a uniform deposition of lithium, as well as the suppression of electrolyte decomposition and cathode deterioration. Consequently, this LHCE achieve over 300 stable cycles for both LiNi0.9Mn0.05Co0.05O2||Li cells and LiCoO2||Li cells, as well as 50 cycles for LiNi0.8Mn0.1Co0.1O2 (NCM811||Li) pouch cells. Furthermore, NCM811||Li cells maintain 84% discharge capacity at −20 °C, in comparison to the capacity at room temperature. The utilization of this electrolyte presents novel perspectives for the safe implementation of LMBs.

Electrolyte Design for Stable Electrode-Electrolyte Interphase to Enable High-Safety and High-Voltage Batteries

A Safe Electrolyte Enriched with Flame-Retardant Solvents for High-Voltage LiCoO2||Graphite Pouch Cells

High‐Voltage and High‐Safety Practical Lithium Batteries with Ethylene Carbonate‐Free Electrolyte

Electrochemical performance and thermal stability analysis of LiNixCoyMnzO2 cathode based on a composite safety electrolyte

Solid-State Interphases Design for High-Safety, High-Voltage and Long-Cyclability Practical Batteries via Ethylene Carbonate-Free Electrolytes

In Situ Inorganic-Rich Electrode–Electrolyte Interphases for Safer 4.5 V Gr||NCM811 Batteries Enabled by an Ethylene Carbonate-Free Electrolyte

Optimized electrolyte design for improved mechanical stability of NCM523/Gr batteries at 4.6V cycles

Dimethyl Sulfide Electrolyte Additive Enabled High-Voltage Lithium-Ion Battery

Synergistic Dual-Salt Electrolyte for Safe and High-Voltage LiNi0.8Co0.1Mn0.1O2//Graphite Pouch Cells

Enhancing the Intrinsic Safety of Nickel-Rich Lithium-Ion Batteries by an Ethylene Carbonate-Free Electrolyte with Ethoxy(pentafluoro) Cyclotriphosphazene Additive

Triple Salts Electrolyte for High Cyclability and High Capability in Practical Safe Nickel-Rich Batteries

Nonflammable electrolyte with low exothermic design for safer lithium-based batteries

Toward a High-Voltage Practical Lithium Ion Batteries with Ultraconformal Interphases and Enhanced Battery Safety

An Intrinsically Nonflammable Electrolyte for Prominent‐Safety Lithium Metal Batteries with High Energy Density and Cycling Stability

Ethylene Carbonate‐Free Electrolytes for Stable, Safer High‐Nickel Lithium‐Ion Batteries

Unraveling the Ethylene Carbonate Effect on the Electro-Chemical/thermosafety Features for Practical LiNi0.9Co0.05Mn0.05O2∥graphite Pouch Cells

Temperature‐Inert Interface Enables Safe and Practical Energy‐Dense LiNi0.91Co0.07Mn0.02O2 Pouch Cells

Having Your Cake and Eating It Too: Electrode Processing Approach Improves Safety and Electrochemical Performance of Lithium-Ion Batteries

Electrolyte Engineering to Construct Robust Interphase with High Ionic Conductivity for Wide Temperature Range Lithium Metal Batteries

Dual‐Polymer‐Electrolytes: High Voltage Stable Polyoxalate Catholyte with Cathode Coating for All‐Solid‐State Li‐Metal/NMC622 Batteries (Adv. Energy Mater. 42/2020)

Achieving Uniform Li Deposition and Suppressed Electrolyte Flammability in Li‐Metal Batteries via Designing Localized High‐Concentration Electrolytes