Abstract:Solid-state lithium batteries using solid polymer electrolytes can improve the safety and energy density of batteries. Smoother lithium-ion channels are necessary for solid polymer electrolytes with high ionic conductivity. The porosity and channel structure of the polymer film affect the transfer of lithium ions. However, their controllable synthesis remains a big challenge. Here, we developed a simple synthesis approach toward wrinkled microporous polymer electrolytes by combining the amphoteric (water solubility and organic solubility) polymer in three polymer blends. The homogeneous blend solution spontaneously wrinkled to vertical fold channels as the solvent evaporated. Two minor polymers, poly(vinyl pyrrolidone) (PVP) and polyetherimide (PEI), formed close stacks, and Janus PVP was dispersed in the poly(vinylidene fluoride) (PVDF) matrix. The interfacial tensions between the three polymers were different, so stress was produced when they solidified. The solvent was evaporated to the top layer of the polymers when the temperature increased. The bottom layer wrinkled owing to the stress during solidification. The evaporation of the solvent generated micropores to form the lithium-ion channel. They helped Li+ transference and created a wrinkled microporous PVDF-based polymer electrolyte, which achieved an ionic conductivity of 5.1 × 10–4 S cm–1 and a lithium-ion transference number of 0.51 at room temperature. Meanwhile, the good flame retardancy and tensile strength of the polymer electrolyte film can improve the safety of the battery. At 0.5C and room temperature, the batteries with a LiFePO4 cathode and the wrinkled microporous LiTFSI/PEI/PVP/PVDF electrolyte reached a high discharge specific capacity of 122.1 mAh g–1 at the 100th cycle with a Coulombic efficiency of above 99%. The results of tensile and self-extinguishing tests show that the polymer electrolyte film has good safety application prospects.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c11489.Experimental section and characterization. Figure S1: forcite dynamics temperature. Figure S2: forcite dynamics energies. Figure S3: gyration radius of the simulation. Figure S4: number of lithium ions transferred in the LiTFSI/PVP/PVDF polymer electrolyte. Figure S5: electrochemical stability window of the LiTFSI/PVP/PVDF polymer electrolyte. Figure S6: voltage–specific capacity curve of the first cycle of the Li∥LiTFSI/PEI/PVP/PVDF∥LiFePO4 battery. Figure S7: potential–specific capacity curve of the Li∥LiTFSI/PEI/PVP/PVDF∥Li2TiO3 battery at 0.5C. Figure S8: discharge capacity and efficiency cycle number curve of the Li∥LiTFSI/PEI/PVP/PVDF∥Li2TiO3 battery at 0.5C. Figure S9: TG curve of polymer electrolyte. Figure S10: DTG curve of polymer electrolyte. Table S1: comparison of the discharge specific capacity of the Lia∥LiTFSI/PEI/PVP/PVDFa∥LiFePO4 battery with the previously reported solid-state polymer electrolyte lithium metal batteries at different temperatures and rate capabilities (PDF)This article has not yet been cited by other publications.

Shear Thickening, Star-Shaped Polymer Electrolytes for Lithium-Ion Batteries

A Shear-Thickening Fluid Based on Ionic Liquid As Dual-Safe Electrolyte for Lithium Batteries

A Polysiloxane-Enabled Ternary Eutectic Electrolyte with Fast Ion Transport under Extreme Conditions

Solid-State, Single-Ion Conducting, Polymer Blend Electrolytes with Enhanced Li + Conduction, Electrochemical Stability, and Limiting Current Density

Poly(ionic Liquid)-Polyethylene Oxide Semi-Interpenetrating Polymer Network Solid Electrolyte for Safe Lithium Metal Batteries

Transparent PVDF-based electrolyte enabled by lipophilic lithium magnesium silicate for solid-state lithium batteries

Safety-enhanced Polymer Electrolytes with High Ambient-temperature Lithium-ion Conductivity Based on ABA Triblock Copolymers

Ultrathin, flexible, solid polymer composite electrolyte enabled with aligned nanoporous host for lithium batteries

Dicationic Tetraalkylammonium-Based Polymeric Ionic Liquid with Star and Four-Arm Topologies As Advanced Solid-State Electrolyte for Lithium Metal Battery

Solid-state rigid-rod polymer composite electrolytes with nanocrystalline lithium ion pathways

Deciphering and Integrating Functionalized Side Chains for High Ion-Conductive Elastic Ternary Copolymer Solid-State Electrolytes for Safe Lithium Metal Batteries

A Solvent-Anchored Non-Flammable Electrolyte

A Rational Design of Solid Polymer Electrolyte with High Salt Concentration for Lithium Battery

Tuning the Properties of a UV-Polymerized, Cross-Linked Solid Polymer Electrolyte for Lithium Batteries

Non-Flammable Polymer Electrolyte with Fast Ion Conductivity for High-Safety Li Batteries

Non-flammable solvent-free liquid polymer electrolyte for lithium metal batteries

Improving Fast and Safe Transfer of Lithium Ions in Solid-State Lithium Batteries by Porosity and Channel Structure of Polymer Electrolyte

Dynamic Interfacial Protection via Molecularly Tailored Copolymer for Durable Artificial Solid Electrolyte Interphase in Lithium Metal Batteries

A New All-Solid-State Hyperbranched Star Polymer Electrolyte for Lithium Ion Batteries: Synthesis and Electrochemical Properties

In-Situ gelled Polymer Electrolytes for Advanced Lithium Ion Batteries

An Electrode‐Crosstalk‐Suppressing Smart Polymer Electrolyte for High Safety Lithium‐Ion Batteries