Abstract:High temperature is an important factor affecting the mechanical properties and crack propagation behavior of granite. In this study, the mechanical properties and thermal damage mechanism of granite after high temperature are studied experimentally. Subsequently, based on the content and distribution of granite minerals, combined with computed tomography (CT) technique and grain-based model (GBM) modeling method, a novel discrete element numerical model considering real mineral distribution is introduced, and the rationality of the method is verified by experiments. On this basis, the mechanical behavior, crack propagation behavior and failure mode of granite after high temperature are studied. The results show that 450 °C is the thermal damage threshold of granite in this study. When T ≤ 450 °C, the development of thermally-induced microcracks is not significant, the P-wave velocity of granite decreases slightly, and the change of mechanical properties is not obvious. When T > 450 °C, the thermally-induced microcrack propagates rapidly, the fracture network and fracture zone are formed locally in the specimen, and the P-wave velocity and mechanical properties of granite deteriorate significantly. The simulation results show that the number of thermally-induced microcracks in granite specimens is positively correlated with temperature, and the tensile cracks are mainly at the mineral boundary, and the thermal stress concentration between mineral particles is the main cause of thermally-induced microcracks. After temperature treatment, there are mainly tensile cracks in granite specimens under uniaxial compression, and the orientation of tensile cracks tends to be isotropic with the increase of temperature. When T < 600 °C, the crack distribution and failure mode of granite specimens under uniaxial compression are consistent with those at room temperature. When T ≥ 600 °C, thermally-induced microcracks begin to dominate the uniaxial compression failure process, and granite specimens begin to show ductile failure characteristics, and the brittle-plastic transition was observed between 600 °C and 750 °C.

Compression-shear Failure of Thermally Treated Granite: Insights from Digital Image Correlation Analysis

Experiment Study on Shear Behavior and Properties of Granite Fractures under Real-time High-temperature Conditions

Tensile Microcracking Behavior of Granites after High Temperature Treatment by Considering the Effect of Grain Size and Mineralogical Composition

Mechanical properties of granite at high temperature subjected to true triaxial compression

Experimental Investigation on Temperature-dependent Shear Behaviors of Granite Discontinuity

Experiment and numerical simulation study of dynamic mechanical behavior of granite specimen after high temperature treatment

Analysis of physical and mechanical behaviors and microscopic mineral characteristics of thermally damaged granite

Real-time Experiment Investigations on the Coupled Thermomechanical and Cracking Behaviors in Granite Containing Three Pre-Existing Fissures

Structural Properties and Failure Characteristics of Granite after Thermal Treatment and Water Cooling

Mechanical Properties and Crack Propagation Behavior of Granite After High Temperature Treatment Based on a Thermo-Mechanical Grain-Based Model

Effects of Pre-Existing Cracks and Temperature on Failure Mode of Granite from Eastern China

Mechanical behavior of granite subjected to thermal treatment: insight from experiment and numerical simulation

Dynamic compression behaviors of heat-treated granite under combined dynamic and static load

Investigations of the Progressive Damage and Failure Behaviors of Thermally Treated Granite Under the Coupling Action of Biaxial Stress Constraint and High Strain Rate

The Sequence of Heating and Loading Affects Shear Properties of Granite Fractures Under High Temperature

Experimental Study on Damage and Fracture Characteristics of Beishan Granite Subjected to High-temperature Treatment with DIC and AE Techniques

Thermo-mechanical Coupling Characteristics of Granite under Triaxial Pressures and Ultrahigh Heating Rates

Thermal effects on prediction accuracy of dense granite mechanical behaviors using modified maximum tangential stress criterion

Thermal Effects on Failure Characteristics of Granite with Pre-Existing Fissures

Mechanical Behaviour and Failure Modes of High-Temperature Jointed Granite Based on DIC and AE Technology

Experimental investigation on damage characteristics and fracture behaviors of granite after high temperature exposure under different strain rates