Abstract:This study concentrates on the dynamic damage analysis of high‐temperature rocks subjected to different thermal shocks. Then the specimens were grouped and heated to 200°C, 400°C, 600°C, and 800°C, then were cooled by natural, water, and liquid nitrogen cooling. Ultrasonic detector tests, the split Hopkinson pressure bar experiments, and scanning electron microscope tests of the high‐temperature granite specimens under different cooling methods were conducted. The change in mechanical properties of high‐temperature rock after cooling treatments is getting increasing attention. However, only a few studies have been conducted on the dynamic characteristic parameters. Therefore, this study aims to perform a dynamic damage analysis of high‐temperature rocks subjected to different thermal shocks. Accordingly, the specimens were grouped and heated to 200°C, 400°C, 600°C, and 800°C, and they were cooled by natural, water, and liquid nitrogen cooling. Ultrasonic detector tests, the split Hopkinson pressure bar experiments, and scanning electron microscope tests of the high‐temperature granite specimens were conducted using different cooling methods. Subsequently, the change rules of dynamic stress–strain curves and properties were calculated, and the morphology and micromorphology of fragments were compared. Based on the outcomes, the thermal shock damage and impact damage evolution were evaluated and quantified. The findings revealed that when the treatment temperature increases, the dynamic peak stress and elastic modulus decrease, while the peak strain increases, and the effect of rapid cooling was more significant in the influence of rock dynamic characteristics. Moreover, when the damage factor is more than 0.51, the change of dynamic stress‐strain is accelerated, leading to the instability of the structure under the impact load. The research results are expected to provide an adequate theoretical basis for the development and utilization of geothermal resources and underground engineering applications.

Experimental Investigation on Temperature-dependent Shear Behaviors of Granite Discontinuity

Experiment Study on Shear Behavior and Properties of Granite Fractures under Real-time High-temperature Conditions

Tensile Microcracking Behavior of Granites after High Temperature Treatment by Considering the Effect of Grain Size and Mineralogical Composition

The Sequence of Heating and Loading Affects Shear Properties of Granite Fractures Under High Temperature

Thermal effects on prediction accuracy of dense granite mechanical behaviors using modified maximum tangential stress criterion

Laboratory Investigation on Physical and Mechanical Behaviors of Granite after Heating and Different Cooling Rates

Mechanical behavior of granite subjected to thermal treatment: insight from experiment and numerical simulation

Shear Behavior of Artificial and Natural Granite Fractures after Heating and Water-Cooling Treatment

Experimental and numerical simulation study on the evolution of mechanical properties of granite after thermal treatment

Experimental study of the influence of temperature and cooling method on dynamic mechanical properties and damage of granite

Investigations of the Progressive Damage and Failure Behaviors of Thermally Treated Granite Under the Coupling Action of Biaxial Stress Constraint and High Strain Rate

Experimental investigation on the mechanical properties of thermally damaged granite specimens containing pre‐existing holes

Experimental investigation on the macro- and micromechanical properties of water-cooled granite at different high temperatures

Analysis of physical and mechanical behaviors and microscopic mineral characteristics of thermally damaged granite

Damage evolution and acoustic emission characteristics of hard rock under high temperature thermal cycles

Experimental Study on Damage and Fracture Characteristics of Beishan Granite Subjected to High-temperature Treatment with DIC and AE Techniques

Temperature driven real-time weakening and strengthening mechanisms of unconfined granite

Influence of Temperature on the Brittle Failure of Granite in Deep Tunnels Determined from Triaxial Unloading Tests

Experimental investigation of mixed mode I-II fracture property of thermally treated granite under dynamic loading

Study on the failure mechanism of high-temperature granite under two cooling modes

Experiment and numerical simulation study of dynamic mechanical behavior of granite specimen after high temperature treatment