Abstract:Recently, the frequency of highway tunnel fire has been increasing annually, which necessitates attention toward the stability and safety of surrounding rocks in the unlined tunnels exposed to fires. This study aimed to investigate the influence of the high temperature of excavation unloading on the physical and mechanical properties of unlined tunnel surrounding rock that has been exposed to fire erosion and tunnel ventilation. To this end, granite specimens that had undergone hierarchical unloading tests were selected as the research object, and high temperature and triaxial reloading tests were carried out on unloading-damaged specimens. The variation of mechanical properties and failure characteristics of unloading-damaged specimens with temperature was analyzed, and the differences in their mass, wave velocity, magnetic properties and apparent characteristics under the influence of high temperatures were compared. The results are as follows: (1) The mechanical properties of the unloading-damaged specimens deteriorate obviously under high temperatures, and the greater the temperature, the higher is the reduction in the sample peak strength; there is an obvious nonlinear relationship between them when the unloading-damaged specimens are reloaded after being exposed to a high temperature, and there is a certain threshold for the reduction of mechanical strength of the specimens due to temperature. (2) During triaxial reloading, the pre-peak strain is not related to the confining pressure, but the post-peak strain is closely related to the unloading confining pressure. The higher the temperature, the greater the post-peak accelerated strain. (3) The unloading effect provides a channel for the high temperature to change the physical and mechanical characteristics of the parent rock. The unloading-damaged specimens are gray white at 25 ℃, gray brown at 300 ℃, and reddish brown at 600 ℃. The results show that the wave velocity of the unloading damage specimen decreases slightly at 300 ℃, but significantly at 600 ℃, with an average decrease of 64.73%. (4) The thermal load intensifies the crack evolution, expansion, and structural relaxation of the unloading-damaged specimens, and the unloading magnitude and temperature change the distribution of the dominant fracture surface of the specimens. The confining pressure plays a dominant role in the deformation and failure of the specimens at low temperatures, while thermal load dominates at high temperatures. The research results can provide a theoretical reference for the engineering design of unlined tunnels with surrounding rocks.

Influence of Temperature on the Brittle Failure of Granite in Deep Tunnels Determined from Triaxial Unloading Tests

Characterization of the Brittleness of Hard Rock at Different Temperatures Using Uniaxial Compression Tests

Effect of high temperature on the brittleness index of granite: an experimental investigation

Triaxial Compressive Strength, Failure, and Rockburst Potential of Granite Under High-Stress and Ground-Temperature Coupled Conditions

Tensile Microcracking Behavior of Granites after High Temperature Treatment by Considering the Effect of Grain Size and Mineralogical Composition

Anisotropic strength, deformation and failure of gneiss granite under high stress and temperature coupled true triaxial compression

The Influence of Temperatures on the Mechanical Properties and Fracture Behavior of Rocks under Mixed Mode I/II Loading

Temperature effect of rockburst in granite caverns: insights from reduced-scale model true-triaxial test

The Sequence of Heating and Loading Affects Shear Properties of Granite Fractures Under High Temperature

Experimental study on mechanical properties and evolution of fracture failure of granite considering initial temperature damage and prefabricated fissure length

Experimental investigation on damage characteristics and fracture behaviors of granite after high temperature exposure under different strain rates

Mechanical properties of granite at high temperature subjected to true triaxial compression

Thermal effects on prediction accuracy of dense granite mechanical behaviors using modified maximum tangential stress criterion

Study on the failure mechanism of high-temperature granite under two cooling modes

Mechanical behavior of granite subjected to thermal treatment: insight from experiment and numerical simulation

Quantitative analysis of the influence of temperature and confining pressure on brittleness of granite: a review

Evolutionary characteristics of mode-I fracture toughness and fracture energy in granite from different burial depths under high-temperature effect

Effect of Thermal Damage on Tensile Strength and Microstructure of Granite: a Case Study of Beishan, China

Thermo-mechanical Coupling Characteristics of Granite under Triaxial Pressures and Ultrahigh Heating Rates

Experiment Study on Shear Behavior and Properties of Granite Fractures under Real-time High-temperature Conditions

Mechanical-characteristic evaluation of excavation unloading rock mass subject to high-temperature conditions