Abstract:Abstract The irrational NH 3 emission routinely poses a significant threat to human health and environmental protection even at low dose. In addition, high miniaturization and low power-consumption has been the critical requirements of Internet of Things. To meet these demands, it is greatly pressing to develop a novel gas sensor with the capability to detect trace NH 3 without external heating or light-irradiation elements. In this work, the organic conducting conjugated polymer PEDOT:PSS was combined with inorganic nitrogen-doped transition metal carbides and nitrides (N-MXene Ti 3 C 2 T x ) for chemiresistive NH 3 sensing at room temperature (20 o C). By means of the organic–inorganic n – p heterojunctions via the synergistic effect, the results show that the composite film sensor with the optimal mass ratio of 1:0.5 between N-MXene and PEDOT:PSS components delivered favorable NH 3 sensing performance than individual N-MXene or PEDOT:PSS counterparts in terms of higher response and quicker response/recovery speeds under 20 o C@36%RH air. Besides, decent repeatability, stability and selectivity were demonstrated. The incorporated N atoms served as excellent electron donors to promote the electron-transfer reactions and augment the sorption sites. Simultaneously, partial oxidation of MXene brought about some TiO 2 nanoparticles which acted as spacers to widen the interlayer spacing and probably suppress the MXene restacking during the film deposition, thus favoring the gas diffusion/penetration within the sensing layer and then a quick reaction kinetic. The modulation of consequent build-in field within the heterojunctions was responsible for the reversible NH 3 sensing. In addition, pre-adsorbed water molecules facilitated to establish a swift adsorption/desorption balance. The proposed strategy expanded the application range of MXene based composite materials and enrich the current sensing mechanisms of NH 3 gas sensors.

Morphology Tuning of NiMo Layered Double Hydroxide-Modified MXene for Highly Sensitive Detection of NH3 with Long-Term Stability

Ti3C2Tx MXene-SnO2 nanocomposite for superior room temperature ammonia gas sensor

MXene Ti 3 C 2 T x -Derived Nitrogen-Functionalized Heterophase TiO 2 Homojunctions for Room-Temperature Trace Ammonia Gas Sensing

MXene/MoS 2 nanosheet/polypyrrole for high-sensitivity detection of ammonia gas at room temperature

Molecular ammonia sensing of PEDOT:PSS/nitrogen doped MXene Ti 3 C 2 T x composite film at room temperature

Imparting hydrophobicity to a MOF on layered MXene for the selective, rapid, and ppb level humidity-independent detection of NH3 at room temperature

Highly Sensitive Ammonia Gas Sensors at Room Temperature Based on the Catalytic Mechanism of N, C Coordinated Ni Single-Atom Active Center

Enhanced ammonia sensing performance based on MXene-Ti3C2Tx multilayer nanoflakes functionalized by tungsten trioxide nanoparticles

Au/α-Fe 2 O 3 /Ti 3 C 2 T x MXene Nanosheet Heterojunctions for High-Performance NH 3 Gas Detection at Room Temperature

Enhanced room temperature ammonia response of 2D-Ti3C2T MXene decorated with Ni(OH)2 nanoparticles

Zr3C2O2 MXene as promising candidate for NH3 sensor with high sensitivity and selectivity at room temperature

Facile Fabrication of Oxygen‐Enriched MXene‐Based Sensor and Their Ammonia Gas‐Sensing Enhancement

Hypersensitivity to pancreatic extracts in parents of patients with cystic fibrosis.

Sensitivity-Enhanced, Room-Temperature Detection of NH3 with Alkalized Ti3C2Tx MXene

High Performance Gas Sensors Based on In-Situ Fabricated ZnO/polyaniline Nanocomposite: the Effect of Morphology on the Sensing Properties

In Situ Prepared Composite of Polypyrrole and Multi-Walled Carbon Nanotubes Grafted with Sodium Polystyrenesulfonate As Ammonia Gas Sensor with Wide Detection Range

Ultra-dense SnO2 QDs-decorated MXene nanosheets with high water dispersibility for rapid NH3 sensing at room temperature

Room-temperature high-performance ammonia gas sensor based on layer-by-layer self-assembled molybdenum disulfide/zinc oxide nanocomposite film

High-Performance Ammonia Detection of Polymeric BaTiO3/Ti3C2Tx MXene Composite-Based Sensor for Gas Emission and Leakage

A Room Temperature Trimethylamine Gas Sensor Based on Electrospinned Molybdenum Oxide Nanofibers/Ti3C2Tx MXene Heterojunction

High Sensitivity Bi2O3/Ti3C2Tx Ammonia Sensor Based on Improved Synthetic MXene Method at Room Temperature