Abstract:The thermal sensitivities of SrTiO3-based ferroelectric ceramics and the dielectric properties have been investigated. Strontium–lead titanate ceramics with variable NTCR–PTCR composite effect were prepared by controlling Pb concentration of the grain boundaries. It was efficient for lowering the room temperature resistivity (ρRT) and weakening the negative temperature coefficient of resistance (NTCR) effect of (Sr, Pb)TiO3 ceramics by adding a small amount of excess PbO. A transformation of thermal sensitivity from the positive temperature coefficient of resistance (PTCR) to NTCR–PTCR characteristics was also observed after a heating treatment process, showing the NTCR–PTCR composite effects of (Sr, Pb)TiO3 semiconducting ceramics were closely related to the variation of Pb concentration at the grain boundaries. The conduction mechanism was proposed to reasonably explain the NTCR–PTCR composite effect of (Sr, Pb)TiO3 semiconducting ceramics. SrTiO3 ceramics capacitors were fabricated by using La2O3–CuO–PbO as dopants. It exhibited a high dielectric constant with stable temperature characteristics. It was found that PbO addition benefited to increasing the dielectric constant and CuO addition mainly segregated at the grain boundaries to form the isolation layers. The relationships between the microstructures and the dielectric properties of SrTiO3–La2O3–CuO–PbO system were discussed.

Effects of Cu Ion Implantation on the Microstructure, Dielectric and Impedance Properties of SrTiO3 Ceramics Prepared by Reduction-Reoxidation Method

Microstructural and Dielectric Properties of SrTiO<sub>3</sub>-Doped CaCu<sub>3</sub>Ti<sub>4</sub>O<sub>12</sub> Ceramics

Ultrahigh insulation resistivity potential under colossal permittivity SrTiO 3 based ceramics via controlling oxygen backfill

High Insulation Resistivity and Ultralow Dielectric Loss in La-Doped SrTiO3 Colossal Permittivity Ceramics through Defect Chemistry Optimization

Colossal Permittivity and Ultralow Dielectric Loss in Nb-doped SrTiO 3 Ceramics

Effect of NiO and Al2O3 on the Curie temperature, microstructure, and dielectric properties of Ba0.5Sr0.5TiO3 ceramics

Layered SrTiO3/BaTiO3 composites with significantly enhanced dielectric permittivity and low loss

The thermal sensitivity and dielectric properties of SrTiO3-based ceramics

Simultaneously Achieving Colossal Permittivity, Ultralow Dielectric Loss Tangent, and High Insulation Resistivity in Er-Doped SrTiO 3 Ceramics via Oxygen Vacancy Regulation

Effects of structural defects on dielectric properties of Nb-doped SrTiO3-based ceramics

The Effect of TiO2 on the Dielectric Performance of ZrO2 and Nb2O5 Pre-Doped CaCu3Ti4O12 Ceramics

A comparative study of microstructure and electrical properties of (Al, Nb) co-doped TiO2 ceramics by different sintering methods

Phase Structure, Bond Features, and Microwave Dielectric Characteristics of Ruddlesden–Popper Type Sr2TiO4 Ceramics

High Dielectric Permittivity and Ultralow Dielectric Loss in Nb-doped SrTiO3 Ceramics

High dielectric permittivity and ultralow dielectric loss in Nb-doped SrTiO 3 ceramics

Diffusion and Defect Chemistry of Temperature-Stable BaTiO3-based Ceramics: Experiment and Theoretical Calculations

Preparation and electrical properties of SrTiO3 ceramics doped with M2O3–PbO–CuO

High resistivity under colossal permittivity SrTiO3 based ceramic via controlling ion diffusion

Significantly Enhanced Dielectric Properties of BaTiO3-based Ceramics Via Synergetic Grain Size and Defect Engineering

An Effective Method to Decrease Dielectric Loss of CaCu3Ti4O12 Ceramics

Novel SrTiO 3 -based ceramics with colossal permittivity, low dielectric loss, and high insulation resistivity via defect engineering