Abstract:Novel nanocomposites based on an AZ91 magnesium alloy matrix reinforced with a hybrid mixture of SiC and TiC nanoparticles with different nanoparticle contents (0.5% and 1%, by mass fraction) were fabricated by semi-solid stirring followed by ultrasonic vibration. Microstructural analysis indicated that the hybrid nanoparticles were uniformly distributed in the nanocomposite. The morphology of the Mg17Al12-based eutectic phase changed from plate-like, in the as-cast AZ91 alloy, to lamellar in the as-cast nanocomposites. The tensile strength and micro-hardness of the nanocomposites were improved by increasing the fraction of nanoparticles in the composite. Following extrusion, the matrix grains in the nanocomposite were significantly refined. The extent of the grain refinement increased at higher mass fractions of the nanoparticle. This refinement was not only due to dynamic recrystallization, but also the synergistic pinning effects arising from both the externally added nanoparticles as well as dynamically precipitated Mg17Al12 particles. The nanoparticle additions led to increases in yield strength (YS), ultimate tensile strength (UTS) and elongation to failure (EL). The increase in YS was mostly attributed to the effects of grain refinement, with additional contributions from the influence of Orowan strengthening and thermal expansion effects. The values of both the work hardening rate (θ) and strain hardening exponent (n) increased with increasing fraction of nanoparticles. The high θ value in stage III was attributed to both grain refinement and weakening of the basal plane texture, while the high n value was mainly related to the increase in resistance to dislocation movement caused by pinning effects of the nanoparticles.

Synergistic Enhancement of Modulus and Ductility in Mg Matrix Composites: A New Strategy for GNPs&MgOnp and SiCp Hybrid Reinforcement

Microstructural Evolution in Graphene Nanoplatelets Reinforced Magnesium Matrix Composites Fabricated Through Thixomolding Process

Development of AZ91D Magnesium Alloy-Graphene Nanoplatelets Composites Using Thixomolding Process

Enhanced Overall Strength and Ductility of Magnesium Matrix Composites by Low Content of Graphene Nanoplatelets

Graphene Nanoplatelets Reinforced Magnesium Matrix Composites Fabricated by Thixomolding

Enhanced overall strength and ductility of magnesium matrix composites by low content of graphene nanoplatelets Part A Applied science and manufacturing

Graphene Nanoplatelets Induced Heterogeneous Bimodal Structural Magnesium Matrix Composites with Enhanced Mechanical Properties

Significantly Improved Strength and Ductility in Bimodal-Size Grained Microstructural Magnesium Matrix Composites Reinforced by Bimodal Sized SiCp over Traditional Magnesium Matrix Composites

Microstructure, Mechanical, Tribological and Synergistic strengthening mechanisms of nickel/graphene nanoplatelets hybrid reinforced AZ91D magnesium-based matrix composites via spark plasma sintering

Processing, Microstructure and Mechanical Properties of a Novel Mg Matrix Composites Reinforced with Urchin-Like CNTs@SiCp

Enhancing Strength and Toughness of GNS/Al Nanocomposites Via a Hybridization Strategy

Development and Strengthening Mechanisms of a Hybrid CNTs@SiCp/Mg-6Zn Composite Fabricated by a Novel Method

Synergistic effects of hybrid (SiC+TiC) nanoparticles and dynamic precipitates in the design of a high-strength magnesium matrix nanocomposite

Graphene Nanoplatelets Reinforced Mg Matrix Composite with Enhanced Mechanical Properties by Structure Construction

Ameliorating the Strength-Modulus Synergy in GNPs Reinforced Mg–Zn–Zr Composites via Multidirectional Forging and Hot Extrusion Deformation

Development of High Performance Magnesium Matrix Nanocomposites Using Nano-SiC Particulates As Reinforcement

Fabrication and Strengthening Mechanisms of Magnesium Matrix Composites with Bimodal Microstructure Induced by Graphene Nanoplatelets

Microstructures and Properties of Graphene-Nanoplatelet-reinforced Magnesium-Matrix Composites Fabricated by an in Situ Reaction Process

Achieving Simultaneous Enhancement of Strength and Ductility in Al Matrix Composites by Employing the Synergetic Strengthening Effect of Micro- and Nano-Sicps

Additively Manufactured High-Performance AZ91D Magnesium Alloys with Excellent Strength and Ductility Via Nanoparticles Reinforcement

Improved Strengthening Efficiency of Nanoreinforcements Realized by a Novel Melt Spinning Process