Abstract:Magnesium (Mg) and its alloys are one of the highly sought after structural material due to its lowest density among the structural material. Various attempts are being made by researchers to improve the mechanical performance of Mg alloys to widen their scope of application domains, especially in defence and biomedical sectors. On the development of Mg matrix composites, various works are reported on adding ceramic-based reinforcement which is proven to improve the strength of the material, but at the cost of ductility. With the research attempt on developing metallic reinforcement-based Mg composites being scarce, the scope of developing such composite material with superior strength and ductility is huge. Nickel has zero-solubility in Mg, high melting point and few closely matching lattice spacing with Mg crystal, which enabled simultaneous crystallization of Mg, with Ni acting as nucleation sites, and helped refining the microstructure. In the present research work, an attempt is made to incorporate 5 Wt.% of sub-micron-Ni particulate as reinforcement in developing an AZ31 matrix composite through stir casting route. A field emission scanning electron microscope and optical microscope was used to give the detailed analysis on the microstructural evaluation of the cast AZ31 alloy and the developed composite. Elemental mapping was done to confirm the uniform distribution of Ni particles throughout the magnesium matrix. The influence of reinforcement on the mechanical properties of the composites were investigated. The composite displayed improved properties when compared to the base alloy in terms of hardness, yield strength and ultimate tensile strength. The hardness of the composite was found to be 68.4HV, whereas the base alloy had a hardness of 53HV. The ultimate tensile strength (UTS) for the AZ31/Ni composite was greater than 50% when compared with the base alloy. Fractography study revealed the type of fracture of the base alloy and the composite.

Development of High Performance Magnesium Matrix Nanocomposites Using Nano-SiC Particulates As Reinforcement

Characteristics and Mechanical Properties of Magnesium Matrix Composites Reinforced with Micron/submicron/nano SiC Particles

Effect of Micro- and Nano-SiC Particulate Reinforcements in Magnesium-Based Metal Matrix Composites

Effect of Submicron Size SiC Particulates on Microstructure and Mechanical Properties of AZ91 Magnesium Matrix Composites

Effects of (micron+submicron+nano) Multisized SiC Particles on Microstructure and Mechanical Properties of Magnesium Matrix Composites

Preparation and properties of nano-sized SiC particles reinforced AZ91D magnesium matrix composites

Magnesium Matrix Nanocomposites Fabricated by Ultrasonic Assisted Casting

Fabrication of SiC Particles-Reinforced Magnesium Matrix Composite by Ultrasonic Vibration

Effects Of (Micron Plus Submicron Plus Nano) Multisized Sic Particles On Microstructure And Mechanical Properties Of Magnesium Matrix Composites

Microstructure and room temperature tensile properties of 1 μm-SiCp/AZ31B magnesium matrix composite

Synergistic effects of hybrid (SiC+TiC) nanoparticles and dynamic precipitates in the design of a high-strength magnesium matrix nanocomposite

Development of Sicp/Az91 Magnesium Matrix Nanocomposites Using Ultrasonic Vibration

Effect of SiC Nanoparticles on AZ31 Magnesium Alloy

Significantly Improved Strength and Ductility in Bimodal-Size Grained Microstructural Magnesium Matrix Composites Reinforced by Bimodal Sized SiCp over Traditional Magnesium Matrix Composites

Effect of Hot Extrusion on Microstructures and Mechanical Properties of SiC Nanoparticles Reinforced Magnesium Matrix Composite

Processing, Microstructure and Mechanical Properties of Magnesium Matrix Nanocomposites Fabricated by Semisolid Stirring Assisted Ultrasonic Vibration

Microstructural Analysis and Mechanical Properties of the Az31B Matrix Cast Composites Containing Micron SiC Particles

Microstructures, Interface Structure and Room Temperature Tensile Properties of Magnesium Materials Reinforced by High Content Submicron SiCp

Effect of submicron size SiC particles on microstructure and mechanical properties of AZ31B magnesium matrix composites

Mechanical Properties and Microstrutures of Nano-Sized Sic Particles Reinforced Az91d Nanocomposites Fabricated by High Intensity Ultrasonic Assisted Casting

Role of Nickel Particulate Reinforcement on Microstructure and Mechanical Performance of AZ31 Magnesium Composite