Abstract:Novel nanocomposites based on an AZ91 magnesium alloy matrix reinforced with a hybrid mixture of SiC and TiC nanoparticles with different nanoparticle contents (0.5% and 1%, by mass fraction) were fabricated by semi-solid stirring followed by ultrasonic vibration. Microstructural analysis indicated that the hybrid nanoparticles were uniformly distributed in the nanocomposite. The morphology of the Mg17Al12-based eutectic phase changed from plate-like, in the as-cast AZ91 alloy, to lamellar in the as-cast nanocomposites. The tensile strength and micro-hardness of the nanocomposites were improved by increasing the fraction of nanoparticles in the composite. Following extrusion, the matrix grains in the nanocomposite were significantly refined. The extent of the grain refinement increased at higher mass fractions of the nanoparticle. This refinement was not only due to dynamic recrystallization, but also the synergistic pinning effects arising from both the externally added nanoparticles as well as dynamically precipitated Mg17Al12 particles. The nanoparticle additions led to increases in yield strength (YS), ultimate tensile strength (UTS) and elongation to failure (EL). The increase in YS was mostly attributed to the effects of grain refinement, with additional contributions from the influence of Orowan strengthening and thermal expansion effects. The values of both the work hardening rate (θ) and strain hardening exponent (n) increased with increasing fraction of nanoparticles. The high θ value in stage III was attributed to both grain refinement and weakening of the basal plane texture, while the high n value was mainly related to the increase in resistance to dislocation movement caused by pinning effects of the nanoparticles.

Improved Strengthening Efficiency of Nanoreinforcements Realized by a Novel Melt Spinning Process

A Novel Method to Fabricate CNT/Mg–6Zn Composites with High Strengthening Efficiency

Development and Strengthening Mechanisms of a Hybrid CNTs@SiCp/Mg-6Zn Composite Fabricated by a Novel Method

Fabrication and Properties of Magnesium Matrix Composite Reinforced by Carbon Nanotubes-Alumina Hybrid Reinforcements

Processing, Microstructure and Mechanical Properties of a Novel Mg Matrix Composites Reinforced with Urchin-Like CNTs@SiCp

Development of High Performance Magnesium Matrix Nanocomposites Using Nano-SiC Particulates As Reinforcement

Microstructure and Strengthening Mechanism of Carbon Nanotubes Reinforced Magnesium Matrix Composite

A Novel Melt Processing for Mg Matrix Composites Reinforced by Multiwalled Carbon Nanotubes

Synergistic effects of hybrid (SiC+TiC) nanoparticles and dynamic precipitates in the design of a high-strength magnesium matrix nanocomposite

Enhanced Combination of Strength and Ductility in Ultrafine-Grained Aluminum Composites Reinforced with High Content Intragranular Nanoparticles

Simultaneously improving strength and ductility of hybrid Al–Si matrix composite with polyphasic and multi-scale ceramic particles

Processing, Microstructure and Mechanical Properties of Magnesium Matrix Nanocomposites Fabricated by Semisolid Stirring Assisted Ultrasonic Vibration

Enhanced Mechanical Behavior and Fabrication of Silicon Carbide Particles Covered by In-Situ Carbon Nanotube Reinforced 6061 Aluminum Matrix Composites

Strengthening Ni-Coated CNT/Mg Composites by Optimizing the CNT Content

Synergistic Enhancement of Modulus and Ductility in Mg Matrix Composites: A New Strategy for GNPs&MgOnp and SiCp Hybrid Reinforcement

Influence of Extrusion Temperature and Process Parameter on Microstructures and Tensile Properties of a Particulate Reinforced Magnesium Matrix Nanocomposite

Fabrication and properties of magnesium matrix composite reinforced by urchin-like carbon nanotube-alumina in situ composite structure

Microstructure and Mechanical Properties of Magnesium Matrix Composite Reinforced with Carbon Nanotubes by Ultrasonic Vibration

Characterization and Strengthening Mechanism of Sic Nanoparticles Reinforced Magnesium Matrix Composite Fabricated by Ultrasonic Vibration Assisted Squeeze Casting

Achieving Simultaneous Enhancement of Strength and Ductility in Al Matrix Composites by Employing the Synergetic Strengthening Effect of Micro- and Nano-Sicps

Developing Fittingly Comprehensive Performance Carbon Nanotube/Mg-6Zn Sheets with Substantial Enhancement in Formability