Abstract:The graphene nanoplatelets (GNPs) reinforced Mg-4Zn-0.5Mn (wt%) matrix composites (GNPs/ZM40) with different concentrations (0.1, 0.3, 0.5 wt%) of GNPs were processed by liquid-state molding method combined with low temperature extrusion process. The microstructure of the prepared materials was analyzed by means of scanning electron microscope (SEM) equipped with Energy Dispersive Spectroscopy (EDS), transmission electron microscope (TEM), X-ray diffractometer (XRD) and optical microscope (OM). And the tensile test at room temperature was carried out to reveal the mechanical properties of the materials. The results showed that the 0.3 wt% GNPs/ZM40 composite exhibited the outstanding mechanical properties of yield strength (YS: ∼466 MPa) and ultimate tensile strength (UTS: ∼532 MPa). In as-cast materials, the addition of GNPs led to the refinement of equiaxed grains and eutectic phases in the composites, closely related with the promotion of heterogeneous nucleation by GNPs during the solidification. After low temperature extrusion, the prominent dynamic recrystallization (DRX) took place in as-extruded alloy and GNPs/ZM40 composites, producing plenty of fine grains. In contrast to the alloy, the average grain sizes of the composites with different GNPs content were reduced, whereas the degrees of recrystallization in the composites increased. These differences in microstructural evolutions originated primarily from the inhibiting effect of GNPs on the grain growth and the boost to DRX by the high-density dislocations in magnesium matrix caused by GNPs. Accordingly, the high YS of the composites could be largely ascribed to fine-grain strengthening, dislocation strengthening effect and load transfer mechanism.

Ameliorating the Strength-Modulus Synergy in GNPs Reinforced Mg–Zn–Zr Composites via Multidirectional Forging and Hot Extrusion Deformation

Achieving high strength in graphene nanoplatelets reinforced Mg-Zn-Mn matrix composites via liquid-state molding technology and low temperature deformation process

Enhanced overall strength and ductility of magnesium matrix composites by low content of graphene nanoplatelets Part A Applied science and manufacturing

Enhanced Overall Strength and Ductility of Magnesium Matrix Composites by Low Content of Graphene Nanoplatelets

Development of AZ91D Magnesium Alloy-Graphene Nanoplatelets Composites Using Thixomolding Process

Graphene Nanoplatelets Reinforced Magnesium Matrix Composites Fabricated by Thixomolding

Graphene Nanoplatelets Induced Heterogeneous Bimodal Structural Magnesium Matrix Composites with Enhanced Mechanical Properties

Achieving high strength and ductility in GNSs/Mg nanocomposites fabricated by in-situ liquid metallurgy combined with hot extrusion

Fabrication, Microstructure and Mechanical Properties of in Situ GNPs Reinforced Magnesium Matrix Composites

Simultaneously improved mechanical and thermal properties of Mg-Zn-Zr alloy reinforced by ultra-low content of graphene nanoplatelets

Fabrication and Strengthening Mechanisms of Magnesium Matrix Composites with Bimodal Microstructure Induced by Graphene Nanoplatelets

Microstructural Evolution in Graphene Nanoplatelets Reinforced Magnesium Matrix Composites Fabricated Through Thixomolding Process

Reinforced AZ91D magnesium alloy with thixomolding process facilitated dispersion of graphene nanoplatelets and enhanced interfacial interactions

Graphene Nanoplatelets Reinforced Mg Matrix Composite with Enhanced Mechanical Properties by Structure Construction

Synergistic Enhancement of Modulus and Ductility in Mg Matrix Composites: A New Strategy for GNPs&MgOnp and SiCp Hybrid Reinforcement

Deformation-driven Metallurgy of Graphene Nanoplatelets Reinforced Aluminum Composite for the Balance Between Strength and Ductility

Microstructure, Texture, and Mechanical Properties of 0.4GNPs/Mg-8Al-1Sm Magnesium Matrix Composites Fabricated by Pulse Current Multi-directional Forging

Microstructure, texture and mechanical properties of 0.4GNPs‐Mg‐8Al‐1Sm composites prepared by pulse current‐assisted multi‐directional forging

Microstructures and Properties of Graphene-Nanoplatelet-reinforced Magnesium-Matrix Composites Fabricated by an in Situ Reaction Process

Strengthening‐toughening of Graphene Nanoplates and in Situ ZrB2 Nanoparticles Reinforced AA6111 Matrix Composites with Discontinuous Layered Structures

Recent Progress on Magnesium Matrix Composites Reinforced by Carbonaceous Nanomaterials