Abstract:Here, a unique combination of a novel carbon-nitrogen source (g-C3N4) with different mole ratios of Ti/g-C3N4 has been utilized to fabricate iron matrix composite coatings by a synchronized powder feeding plasma transferred arc (PTA) cladding technology. The results show that submicron Ti(C,N) particles are successfully fabricated in situ on a Q235 low carbon steel substrate to reinforce the iron matrix composite coatings and exhibit dense microstructures and good metallurgical bonding between the coating and the substrate. The microstructure of the coating consists of an -Fe matrix and Ti(C,N) particles when the mole ratio of Ti/g-C3N4 is no more than 5:1. The microhardness and wear resistance of the coating gradually improve with increasing abundance of the in situ synthesized Ti(C,N) particles. Interestingly, for a Ti/g-C3N4 mole ratio of 6:1, a fine lamellar eutectic Laves phase (Fe2Ti) appears, and this phase further improves the microhardness and wear resistance of the coating. The microhardness of the coating is 3.5 times greater than that of the Q235 substrate, and the wear resistance is enhanced 7.66 times over that of the substrate. The Ti(C,N)/Fe2Ti and Fe2Ti/-Fe interfaces are very clean, and the crystallographic orientation relationships between the phases are analyzed by high-resolution transmission electron microscopy (HRTEM) and an edge-to-edge matching model. The theoretical predictions and the experimental results are in good agreement. Furthermore, based on the present study, for the solidification process near equilibrium, smaller interatomic spacing misfits and interplanar spacing d-value mismatches contribute to the formation of crystallographic orientation relationships between phases during the PTA cladding process. The existence of orientation relationships is beneficial for improving the properties of the coatings. This work not only expands the application fields of g-C3N4 but also provides a new idea for the preparation of Ti(C,N) particle-reinforced composite coatings.

Heterogeneous Nucleation Mechanism of CaS and TiN on Spinel Combining DFT Calculations and Experiments

TiC As Heterogeneous Nuclei of the (fe, Mn)3C and Austenite Intergrowth Eutectic in Austenite Steel Matrix Wear Resistant Composite

Double Matching Heterogeneous Nucleation in Superhigh Manganese Steel

First-principles study on TiC/TiN heterogeneous nucleation interface in high-titanium steel

The Valence Electron Criterion on Heterogeneous Nucleus Catalysis During Non-Equilibrium Solidification of Austenite Steel

Study on the Formation and Control of TiN Inclusion in Mushy Zone for High Ti Microalloyed Steel

A New Design of In-situ Ti(C,N) Reinforced Composite Coatings and Their Microstructures, Interfaces and Wear Resistances.

First-principles investigation of interface atomic arrangement and segregation behavior of solute elements in Al/TiC interface in TiC/2219 composites

Preparation of in situ TiC@TiN core–shell and Ti2N–Al4C3 nanoparticles and their effects on Al–Zn–Mg–Cu alloy

Atomistic Nucleation Mechanism of Titanium Oxides in Steel Based on Homogeneous and Heterogeneous Modes

Investigation on the formation mechanism of composite inclusions by multi-scale characterization in high manganese steel with yttrium addition

A new insight into heterogeneous nucleation mechanism of Al by non-stoichiometric TiCx

Growth mechanism of MnS/Fe on TiN surface: First principle investigation

Interfacial structures and strengthening mechanisms of in situ synthesized TiC reinforced Ti6Al4V composites by selective laser melting

Relationship between crystallographic structure of the Ti2O3/MnS complex inclusion and microstructure in the heat-affected zone (HAZ) in steel processed by oxide metallurgy route and impact toughness

Tuning composition and microstructure by doping Ti and C for enhancing mechanical property and wear resistance of Al0.2Co1.5CrFeNi1.5Ti0.5 high entropy alloy matrix composites

Synergistic optimization in microstructure and mechanical properties of low carbon steel via trace amount of nano-sized TiC-TiB2

First principles study on heterogeneous interfaces of TiCu alloys through aluminum addition

Inclusion and Microstructure Characteristics in Steels with TiN Additions

Control of Coarse Precipitates of Titanium Nitride in High-Strength Low-Alloy Steel

Reaction-induced nano-sized TiC in additive manufactured Ni-Co based superalloy