Abstract:The structure and oscillation characteristics of the shock train during steady and oscillatory flows in a supersonic cascade was experimentally studied. The study was based on the SAV21 supersonic cascade designed by the German Aerospace Centre operating under incoming Mach number equal to 2.27 and flow turning angle of 45 degrees. Before the onset of stall, the expansion waves generated on the curved configuration of the suction surface (stage III) and the separation bubble (stage IV) suppresses the movement of the shock train. A striking feature of stage 1 of the oscillatory flows is that as the throttling ratio increases, the dominant frequency of the pressure fluctuation keeps decreasing and the high-energy oscillations take up more time and a wider frequency range. Then stage 2 (which is composed of large-amplitude oscillations and secondary oscillations) appears. With the enhancement of the throttling ratio, the occurrence probability of large-amplitude oscillations rises in stage 3. The shock train propagates into the upstream passage in stage 4, the final stage. Through cross-wavelet transform, it was discovered that the immediate change of the entrance local conditions leads to the in-phase fluctuation of pressure in the entire flowfield during the oscillatory flows, which is consistent with the observation of Dailey. Further analysis indicates that all the oscillation stages except stage 4, are triggered by the suction-surface flow separation, which belongs to the Dailey criterion. Furthermore, the feedback loop established by the communicating ways (acoustic wave propagation, shock movement, spillage, and separation bubble deformation) is brought forward.

Shockwave Structures Optimization and Flow Mechanisms in Axial Supersonic Through-Flow Fan Cascades

A throughflow-based optimization method for multi-stage axial compressor

An Optimization on the Stacking Line of Low-Pressure Axial-Flow Fan Using the Surrogate-Assistant Optimization Method

Performance Sensitivity Analysis and Aerodynamic Optimization of Compressor Cascades by a Turbulence Adjoint Method

Aerodynamic Shape Optimization of a Transonic Fan by an Adjoint-Response Surface Method

Adjoint Aerodynamic Optimization of a Transonic Fan Rotor Blade with a Localized Two-Level Mesh Deformation Method

Design Optimization of a Supersonic Through-Flow Fan Rotor Based on the Blade Profiles

Effect of inlet Mach number on performance and flow structure of an axial supersonic through-flow fan cascade

Impacts of Tandem Configurations on the Aerodynamic Performance of an Axial Supersonic Through-Flow Fan Cascade

Basic Analysis on the Design of an Fan Stage With Axial Supersonic Through-Flow Rotor

A kind of new concept - Supersonic incoming-flow fan

Aerodynamic Optimization and Mechanism Investigation on Performance Improvements in a Transonic Compressor Cascade

Aerodynamic Design of Supersonic Compressor Cascade and Vorticity Dynamic Diagnosis of Flow Field Structure

Optimum design of camber line shape in a transonic axial fan cascade with splitter

Experimental Investigation of the Throttling Process and Oscillation Mechanism in a Supersonic Cascade

Investigation of Modification Design of the Fan Stage in Axial Compressor

Aerodynamic Design Method and Experimental Investigation of a High-Load Supersonic Compressor Cascade

Blade Shape Optimization for Transonic Axial Flow Fan

Influence of Solidity on Aerodynamic Performance of Axial Supersonic Through-Flow Fan Cascades

High-frequency unsteady flow near the tip in a transonic fan rotor with a small clearance

Aerodynamic Optimization of Transonic Cascade Using Global Aerodynamic Optimization Method