Abstract:The effect of cascade aerodynamic optimization on turbomachinery design is very significant. However, for most traditional cascade optimization methods, aerodynamic parameters are considered as boundary conditions and rarely directly used as the optimization variables to realize optimization. Given this problem, this paper proposes an improved cascade aerodynamic optimization method in which an incidence angle and nine geometric parameters are used to parameterize the cascade and one modified optimization algorithm is adopted to find the cascade with the optimal aerodynamic performance. The improved parameterization approach is based on the Non-Uniform Rational B-Splines (NURBS) method, the camber line superposing thickness distribution molding (CLSTDM) method, and the plane cascade design method. To rapidly and effectively find the cascade with the largest average lift-drag ratio within a certain range of incidence angles, modified particle swarm optimization combined with the modified very fast simulated annealing algorithm (PSO-MVFSA) is adopted. To verify the feasibility of the method, a cascade with NACA4412 and a practical cascade are optimized. It is found that the average lift-drag ratios of two optimal performance cascades are respectively increased by 13.38% and 15.21% in comparison to those of two original cascades. Meanwhile, through optimizing the practical cascade of the Blade D500, under different volume flow rates, the pressure coefficient of the optimized cascade is increased by an average of more than 6.12% compared to that of the prototype, and the average efficiency is increased by 11.15%. Therefore, this improved aerodynamic optimization method is reliable and feasible for the performance improvement of cascades with a low Reynolds number.

Study on Aerodynamic Optimal Super/transonic Turbine Cascade and Its Geometry Characteristics

Performance Sensitivity Analysis and Aerodynamic Optimization of Compressor Cascades by a Turbulence Adjoint Method

Assessment of Turbulence Adjoint Method in Sensitivity Calculation and Aerodynamic Design Optimization of Turbomachinery Cascades

Three-Dimensional Aerodynamic Design Optimization of A Turbine Blade by Using an Adjoint Method

Aerodynamic Optimization and Mechanism Investigation on Performance Improvements in a Transonic Compressor Cascade

Aerodynamic Optimization of Transonic Cascade Using Global Aerodynamic Optimization Method

Influence of key geometric parameters on the aerodynamic performance of a supersonic compressor cascade

Aerodynamic Design of Supersonic Compressor Cascade and Vorticity Dynamic Diagnosis of Flow Field Structure

Aerodynamic Design Method and Experimental Investigation of a High-Load Supersonic Compressor Cascade

Experimental Investigation of the Transonic Shock Oscillation Characteristics in a Heavy-Duty Gas Turbine Compressor Cascade

Performance-Driven Multi-Objective Optimization Method for DLR Transonic Tandem Cascade Shape Design

Investigations on Aerodynamic Performance of Turbine Cascade at Different Flow Conditions

Optimization Design of Aspect Ratio and Solidity of a Heavy-Duty Gas Turbine Transonic Compressor Rotor

Multi-objective Shape Optimization of Transonic Compressor Cascade at the Same Inlet Mach Number

Applications of an Improved Aerodynamic Optimization Method on a Low Reynolds Number Cascade

Aerodynamic Optimization Design of Turbomachinery Cascade Based on Discrete Adjoint Method

Aerodynamic Inverse Design Optimization for Turbine Cascades Based on Control Theory

Effects of Trailing Edge Profile and Coolant Ejection on the Loss in a Transonic Turbine Cascade

2D Viscous Aerodynamic Shape Design Optimization for Turbine Blades Based on Adjoint Method

Enhancing Aerodynamic Performance of a Non-Axisymmetric Endwall Contoured Cascade Through Section Profiling Method

Research on Aerodynamic Characteristic and Optimal Design of Turbine Cascades with Curved Blades at Different Attack Angles