Abstract:The interleaved converter is widely used in clean energy systems due to inherent advantages, such as low current ripple, high reliability, and superior energy density. However, an open circuit fault (OCF) will increase the current ripple and reduce the reliability of an interleaved converter. Therefore, detecting and locating the OCF as soon as possible is essential. This paper proposes a robust method based on the reconstructed phase current to detect and locate the OCF. The phase current averages are reconstructed by establishing mathematical relationships between total input current and phase currents. The reconstructed phase currents can easily indicate the fault phase. Instead of requiring N sensors to sample the phase current, only a single current sensor is necessary for input current sampling. Additionally, the reconstructed phase current can also be used for current-sharing control, offering cost-effectiveness. Both simulation and hardware experiments confirm the effectiveness and robustness of the proposed method. The proposed method quickly diagnoses the OCF within a switching period in hardware experiments. Furthermore, the robustness of the proposed method against input voltage and load disturbances and its operation at higher switching frequencies are demonstrated. Notably, the proposed method is adaptable to multi-phase interleaved buck converter, regardless of the number of phases.

A Novel Short-Circuit Fault Diagnosis Method for Three-Phase Current Source Converter

A Simple and Efficient Strategy for Online Detection of Multiple Open-Switch Fault in Multiphase Machine Drive Systems

A Novel Open-Circuit Fault Diagnosis Method for Voltage Source Inverters With a Single Current Sensor

Open-transistor Faults Diagnosis in Voltage-Source Inverter Based on Phase Voltages with Sliding-Window Counting Method.

A Fast Diagnosis Method for Both IGBT Faults and Current Sensor Faults in Grid-Tied Three-Phase Inverters With Two Current Sensors

Fast Diagnosis of Multiple Open-Circuit Faults in a T-type Inverter Based on Voltages Across Half-Bridge Switches

A Fault Diagnosis Method for Solid-state Fault Current Limiters Used in Three Phase Ungrounded System

Fault diagnosis scheme for open-circuit faults in switched reluctance motor drives using fast Fourier transform algorithm with bus current detection

An Open-Switch Fault Diagnosis Method for Three-Phase Voltage Source Converter Using Tracking Differentiator

Fault Diagnosis Method for Neutral Grounding Three-Phase Bridge Type SSFCL

Open-Switch Fault Diagnosis Method in Voltage-Source Inverters Based on Phase Currents

Fast Diagnosis and Location Method for Open-Circuit Fault in Inverter Based on Current Vector Character Analysis

Wavelet Packet Decomposition-Based Fault Diagnosis Scheme for Srm Drives with A Single Current Sensor

Fast Transistor Open-Circuit Faults Diagnosis in Grid-Tied Three-Phase VSIs Based on Average Bridge Arm Pole-to-Pole Voltages and Error-Adaptive Thresholds

Reconstructed Phase Current-Based Fault Diagnosis Method for Interleaved Buck Converter

A Nonintrusive IGBT Open-Circuit Fault and Current Sensor Fault Diagnosis Method for Grid-Tied Three-phase Three-Wire Inverter with Two Current Sensors

Current Vector Phase‐Based Diagnostic Method for Multiple Open‐Circuit Faults in Voltage‐Source Inverters

A Robust Open-Circuit Fault Diagnosis Method for Three-Phase Interleaved Boost Converter

A Fast Average Model-Based Method for IGBT and Current Sensor Fault Diagnosis in Grid- Tied Inverters.

Cascaded SAPF Fault Diagnosis Method Based on H-bridge Voltage and Current

Real-time Diagnosis of Open Circuit Faults in Three-Phase Voltage Source Inverters