Abstract:A lattice‐matched MTO coating has successfully been built on ultrahigh single‐crystal LiNi0.9Co0.05Mn0.05O2 particle by a neoteric in situ chemical reaction process, which can not only relieve lattice strain by avoiding inhomogeneity of the Li‐ion concentration, but also suppress cation mixing and irreversible oxygen loss for ensuring the smooth transportation of Li‐ion, thus preventing planar gliding and delamination cracking along the sliding planes. Planar gliding along with anisotropic lattice strain of single‐crystalline nickel‐rich cathodes (SCNRC) at highly delithiated states will induce severe delamination cracking that seriously deteriorates LIBs' cyclability. To address these issues, a novel lattice‐matched MgTiO3 (MTO) layer, which exhibits same lattice structure as Ni‐rich cathodes, is rationally constructed on single‐crystalline LiNi0.9Co0.05Mn0.05O2 (SC90) for ultrastable mechanical integrity. Intensive in/ex situ characterizations combined with theoretical calculations and finite element analysis suggest that the uniform MTO coating layer prevents direct contact between SC90 and organic electrolytes and enables rapid Li‐ion diffusion with depressed Li‐deficiency, thereby stabilizing the interfacial structure and accommodating the mechanical stress of SC90. More importantly, a superstructure is simultaneously formed in SC90, which can effectively alleviate the anisotropic lattice changes and decrease cation mobility during successive high‐voltage de/intercalation processes. Therefore, the as‐acquired MTO‐modified SC90 cathode displays desirable capacity retention and high‐voltage stability. When paired with commercial graphite anodes, the pouch‐type cells with the MTO‐modified SC90 can deliver a high capacity of 175.2 mAh g−1 with 89.8% capacity retention after 500 cycles. This lattice‐matching coating strategy demonstrate a highly effective pathway to maintain the structural and interfacial stability in electrode materials, which can be a pioneering breakthrough in commercialization of Ni‐rich cathodes.

Enabling Superior Performance in Brick-Like Single-Crystal LiMn2O4 Via BaO Flux

Improved Li-ion Diffusion and Stability of a LiNi0.5Mn1.5O4 Cathode Through in Situ Co-Doping with Dual-Metal Cations and Incorporation of a Superionic Conductor

Controllable Growth of LiMn2O4 by Carbohydrate-Assisted Combustion Synthesis for High Performance Li-ion Batteries

A high-performing spinel LiMn2O4 cathode material with unique morphology and scaled manufacture

Oxides Induced Preferential Growth of {110} Planes for Superior Performance Single-Crystal LiMn2O4 Through Solid-State Process

Oxides Induced Preferential Growth of {110} Planes for Superior Performance Single-Crystal LiMn2O4 Through Solid-State Process.

Building interface bonding and shield for stable Li-rich Mn-based oxide cathode

Submicron single-crystalline LiNi0.5Mn1.5O4 cathode with modulated Mn3+ content enabling high capacity and fast lithium-ion kinetics

Optimized activation of Li2MnO3 effectively boosting rate capability of xLi2MnO3∙(1-x)LiMO2 cathode

Addressing Mn Dissolution in High‐Voltage LiNi0.5Mn1.5O4 Cathodes via Interface Phase Modulation

In Situ Constructing Ultrastable Mechanical Integrity of Single‐Crystalline LiNi0.9Co0.05Mn0.05O2 Cathode by Interior and Exterior Decoration Strategy

Optimized activation of Li<sub>2</sub>MnO<sub>3</sub> effectively boosting rate capability of xLi<sub>2</sub>MnO<sub>3</sub>?(1-x)LiMO2 cathode

Intelligent phase-transition MnO2 single-crystal shell enabling a high-capacity Li-rich layered cathode in Li-ion batteries

New strategy for enhancing the electrochemical performance of LiMn2O4 cathode material

Evolution of Spinel LiMn 2 O 4 Single Crystal Morphology Induced by the Li 2 MnO 3 Phase during Sintering

Enabling Structural and Interfacial Stability Via Coherent Interface Li3BO3 Coating for Lithium-Rich Manganese-Based Cathodes

Constructing a robust integrated surface structure for enhancing the performance of Li-rich Mn-based oxides cathodes

Developing a high‐performing spinel LiMn2O4 cathode material with unique morphology, fast cycling and scaled manufacture

Fluorination Effect on Lithium- and Manganese-Rich Layered Oxide Cathodes

Synthesis of high-performance single-crystal Li-rich cathode by self-combustion method

The surface double-coupling on single-crystal LiNi0.8Co0.1Mn0.1O2 for inhibiting the formation of intragranular cracks and oxygen vacancies