Abstract:With the increasing demand for high thrust-weight ratio aero-engines, the development of environmental barrier coatings (EBCs) for SiC-based ceramics is an enormous challenge, which requires both high temperature stability and resistance to molten calcium-magnesium-aluminosilicate (CMAS) corrosion. In this work, a novel high-entropy disilicate (Y0.25Yb0.25Er0.25Sc0.25)2Si2O7 ((4RE0.25)2Si2O7) EBC materials was prepared by a two-step process. The high-entropy disilicate powder was synthesized by sol-gel method, and then Y-Si-Al-O silicate glass was used as sintering aids to facilitate densification of the (4RE0.25)2Si2O7 ceramic by liquid sintering. The results of XRD, SEM and EDS showed that as-synthesized powders were pure high-entropy disilicate (4RE0.25)2Si2O7, and bulk (4RE0.25)2Si2O7 ceramic exhibited a dense structure, in which (4RE0.25)2Si2O7 grains were uniformly distributed into Y-Si-Al-O glass. Compared with single disilicate RE2Si2O7 (RE = Y and Er) ceramics, the high entropy (4RE0.25)2Si2O7 ceramic showed a good phase stability and almost no change in grain size during sintering at 1600 °C for in the holding time range of 5–15 h, suggesting a good high temperature stability. During molten CMAS corrosion, Ca2+ ions can diffuse into the Y-Si-Al-O glass phase wrapped on the surface of (4RE0.25)2Si2O7 grains, and then corrode (4RE0.25)2Si2O7 grains, thereby forming the corrosion zone consisting of reaction layer and diffusion layer. The Y-Si-Al-O glass can play a blocking layer role to suppress Ca2+ diffusion and mitigate molten CMAS corrosion, so that as-prepared (4RE0.25)2Si2O7 ceramic showed a relatively good ability for resisting molten CMAS corrosion. After molten CMAS corrosion at 1500 °C for 48 h, thickness of the reaction layer was only 73 µm. The results will be a solid foundation for the application of environmental barrier coating materials in long-period high temperature molten silicate environment.

Generation Mechanism of Si-Y-B-Yb Ceramics with Enhanced Water-Oxygen Corrosion Resistance

High temperature corrosion behavior and the inhibition of apatite formation evolving from corrosion of (Y1−Yb )2SiO5 in water vapor environment

Hot corrosion behaviors of SrZrO3 ceramic co-doped with Y2O3 and Yb2O3 in molten Na2SO4, V2O5, and Na2SO4 + V2O5 salts mixture

Corrosion behavior and mechanism of ytterbium silicates environmental barrier coatings to thermal cycling in water vapor

The Oxidation Behavior and Corrosion Mechanism of SiC Matrix Ceramics in a High Temperature Wet Air Environment

Thermal aging and CMAS corrosion behaviors of Y2SiO5 ceramic for environmental barrier coatings

Enhanced wet-oxidation resistance of Y2O3 modified SiC ceramics by the formation of Y2Si2O7 protective layer

In-situ Grown Y3Si2C2 on RB-SiC Ceramic for Enhanced Wet-Oxygen Corrosion Resistance

Y/YbB4-modified SiCf/SiC composites with enhanced water-oxygen corrosion resistance

The impact of water and oxygen contents on the corrosion performance of yttrium silicate modified SiC f /SiC composites under high temperature conditions

Water vapor corrosion behaviors of plasma sprayed ytterbium silicate coatings

Phase evolution and hot corrosion behavior of Yb2O3 and CeO2 co-doping YSZ ceramics under high temperature

Al-modified environmental barrier coatings for protection against water vapor corrosion

Preparation and properties of SiC/SiC-SiYC with excellent water-oxygen corrosion resistance

Corrosion behavior of Yb4Hf3O12 ceramics exposed to Calcium-Ferrum-Alumina-Silicate (CFAS) coupled with water vapor at 1400 °C

The Comparative Investigation of Oxidation Behavior and Corrosion Mechanisms of SiC Matrix Ceramics under Different Atmospheres

High-temperature Melt-Infiltration Preparation and Erosion Behavior of Γ-Y2si2o7 /Y2o3-Sio2-al2o3 Glass Coating on Porous Si3N4 Ceramics

Oxidation behaviors and mechanisms of Yb2SiO5-Yb2O3-Si-SiC ceramic fabricated by tape casting and reactive melt infiltration

Preparation and corrosion resistance of high-entropy disilicate (Y0.25Yb0.25Er0.25Sc0.25)2Si2O7 ceramics

Fabrication and Thermal Shock Resistance of Multilayer Γ-Y2si2o7 Environmental Barrier Coating on Porous Si3N4 Ceramic

Thermal shock behavior and oxidation resistance of novel SiC nanowires+Si/Yb2Si2O7-Si/Yb2Si2O7 environmental barrier coatings