Abstract:A full understanding of the material properties of skin tissue is crucial for exploring its tribo-mechanical behaviour. It has been widely accepted that the mechanical behaviour of skin tissue for both small and large deformations can be accurately described using a hyperelastic model, such as the one developed by Ogden. However, obtaining these Ogden parameters for in-vivo skin by in-vivo experiments no matter the indentation or suction tests is a significant challenge. The mathematical model used to describe the material behaviour during the test should consider not only the material nonlinearity but also the geometrical confinement of the tissue, the large deformations induced, and the fact that the specimens are relatively thin. A range of contact models is available to describe the contact behaviour during the indentation test. However, none of them can be used for hyperelastic materials with small thickness under large deformations. Simultaneously explaining material nonlinearity and geometric nonlinearity, either through theoretical equations or numerical calculations, poses a significant challenge. In this research, we propose a pragmatic method to obtain Ogden parameters for in-vivo skin tissue by combining experimental indentation results and numerical simulations. The indentation tests were used to obtain the force-indentation depth curves, while the numerical simulations were used to obtain the strain fields. The method assumes the material behaviour of specimens can be linearized in each small deformation increment, and the contact model developed by Hayes can be applied to accommodate each increment. Then, the linear elastic behaviour in each increment can be described by the elastic modulus E which were obtained using Hayes model, and the principal stresses in each increment were subsequently obtained using Hooke's law. By combining all stress fields, overall stress-strain curves can be constructed, from which the hyperelastic Ogden parameters can be obtained. A second numerical simulation of the hyperelastic indentation was then performed using the obtained Ogden parameters, allowing a comparison of the experimental and simulated relationships between force and indentation.

An Indentation Method to Determine the Constitutive Parameters of Hyperelastic Films under Large Deformation: Theoretical Model, Experiments and Simulations

Spherical Indentation Method for Determining the Constitutive Parameters of Hyperelastic Soft Materials

Measuring elastoplastic properties of thin films on an elastic substrate using sharp indentation

Spherical indentation on biological films with surface energy

Identifying the Viscoelastic Properties of Soft Matter from the Indentation Response of a Hard Film-Soft Substrate System

Multi-scale Indentation Model of Stiff Film-Compliant Substrate Structures

Determining the constitutive behavior of nonlinear visco-elastic-plastic PMMA thin films using nanoindentation and finite element simulation

In Situ Nanoindentation Mechanical Property of Films by Atomic Force Microscope

Elastic Contact Versus Indentation Modeling of Multilayered Materials

Lateral indentation of a thin elastic film

Nano-Indentation for Characterizing Mechanical Properties of Soft Materials

Mechanics of Indentation for Piezoelectric Thin Films on Elastic Substrate

Indentation of A Square Elastomeric Thin Film by A Flat-Ended Cylindrical Punch in the Presence of Long-Range Intersurface Forces

Wedge Indentation of a Thin Film on a Substrate Based on Micromorphic Plasticity

Spherical Indentation into Elastoplastic Materials: Indentation-response Based Definitions of the Representative Strain

Indentation Size Effect: A Study Via The Mechanism-Based Strain-Gradient Plasticity Theory

Identification of Elastic-Plastic Material Parameters from Pyramidal Indentation of Thin Films

A Study on Length Scale Effects on Indentation Delamination of Thin Films

A New Method for Determining the Ogden Parameters of Soft Materials using Indentation Experiments

Surface Effects on Cylindrical Indentation of a Soft Layer on a Rigid Substrate

Nonlinear Indentation of Second-order Hyperelastic Materials