Abstract:Unlike individual unmanned aerial vehicles (UAVs), integrated aerial platforms (IAPs) containing multiple UAVs do not suffer from underactuation and can move omnidirectionally in six dimensions, providing a basis for constructing aerial manipulation platforms. Compared to single UAVs, multi-UAV IAPs are also advantageous in terms of payload and fault-tolerance capacity, making them promising candidates as platforms with integrated-response, observation, and strike capabilities. Herein, an IAP structure design containing three sub-UAVs connected in a star-like configuration is presented. This form of integration enables the IAP, as a whole, to simultaneously adjust its position and attitude in six dimensions. The dynamics of the overall system of the IAP are modeled. On this basis, an overall system controller is designed. To simplify control, based on stability of cascaded system, the rotational motion of the sub-UAVs is treated as a inner-loop subsystem, whereas the overall motion of the IAP is seen as a outer-loop subsystem. Because the configuration space of the sub-UAVs is non-Euclidean, a controller is designed for the outer-loop subsystem based on model predictive control on the manifold. Subsequently, the stability of the closed-loop system is demonstrated. Fieldbus technology is employed to design a real-time, scalable communication architecture for multiple sub-UAVs, followed by the development of a principle prototype of the multi-UAV IAP that consists of hardware and software systems. The effectiveness of the IAP design and control method is validated through simulation and real-world prototype-based tests. In the simulation and real-world tests, the proposed methodology can make the IAP system converge to the desired configuration at the presence of large initial configuration error. The same test scenario cannot be finished by a baseline PID controller. The advantage of the proposed control scheme in dealing with state and input constraints is shown via such tests.

Modeling and Control of PADUAV: a Passively Articulated Dual UAVs Platform for Aerial Manipulation*

A High-Performance Structural Aircraft: Modeling And Control

Design and Implementation of a Fully-Actuated Integrated Aerial Platform Based on Geometric Model Predictive Control

Modeling and Control of a New Multicopter

Controlling of an Under-Actuated Quadrotor UAV Equipped with a Manipulator

Unmanned Aerial Transportation System with Flexible Connection Between the Quadrotor and the Payload: Modeling, Controller Design, and Experimental Validation

Modeling and Controlling the Dynamic Behavior of an Aerial Manipulator

Design, Sensing, and Control of a Novel UAV Platform for Aerial Drilling and Screwing

Modeling and Control of an Omnidirectional Hexrotor UAV with Tilted-Rotors

Aerial Manipulation Using a Novel Unmanned Aerial Vehicle Cyber-Physical System

Design and Control of Penta-Jet Aerial Vehicle

A Simple Six Degree-of-Freedom Aerial Vehicle Built on Quadcopters

Modeling and Control of a Quadrotor Tail-Sitter Unmanned Aerial Vehicles

Expandable Fully Actuated Aerial Vehicle Assembly: Geometric Control Adapted from an Existing Flight Controller and Real-World Prototype Implementation

Modeling and Controlling of Quadrotor Aerial Vehicle Equipped with a Gripper

Modeling and Control of a Quadrotor UAV with Aerodynamic Concepts

Research on Aerial Autonomous Docking and Landing Technology of Dual Multi-Rotor UAV

Lifting-wing Quadcopter Modeling and Unified Control

An Innovative Aerial Manipulator with Tandem Ducted Fans: Modeling, Control, and Simulation

Modeling and Control of an Omnidirectional Micro Aerial Vehicle Equipped with a Soft Robotic Arm

Modelling and position tracking control for quadrotor vehicle