Abstract:We design the navigation and control system for unmanned aerial vehicle (UAV) with four tilting rotors. The considered UAV implements the so-called X-sceme, which implies the main body and four symmetrical beams, upon which rotors with propellers are mounted. It is different from the classical quadrotor by having four additional servomotors that may change the orientation of the rotors with respect t the main body, thus increasing the control parameters number. Greater number of the actuators in the system, on the one hand, opens new venues for UAVs’ applications but, on the other hand, makes the mathematical model of the UAV’s dynamics quite complicated. The latter calls for new control algorithms to be developed. We start by forming the mathematical models of the UAV’s dynamics. It is shown that the introduction of the tilting motors allows implementing independent control of the quadrotor’s position and attitude. The control loop is designed on the base on the analytical dynamics inversion. The expressions for the control parameters thus obtained are subjected to the numerical analysis, which allows taking into account technical constraints for maximal motor speed and tilt angles. Feedback in the control loop is implemented by simulation of the on-board sensors’ signals, whose characteristics correspond to those of the sensors used in the UAV’s experimental prototype design. The signals are processed with the aid of the unscented Kalman filter algorithm. The results of numerical experiments corroborate the efficiency of the developed control and navigation algorithms. The mission simulated in the numeric experiments is tracking of a pre-defined trajectory and pointing with a body-fixed camera at a mobile object, which, in turn, moves along a programmed trajectory.The results of the numeric experiments show that the UAV is capable of performing complex maneuvers with independent position and attitude control.

Modeling and Control of an Omnidirectional Hexrotor UAV with Tilted-Rotors

Longitudinal dynamic modelling and control for a quad-tilt rotor UAV

System Design of a Novel Tilt-Roll Rotor Quadrotor UAV

Tilt-Rotor Quadrotor Control System Design and Mobile Object Tracking

Tri-Tilting Rotor Fixed-Wing VTOL UAV: Dynamic Modelling and Transition Flight Control

A Nonlinear Robust Sliding Mode Controller with Auxiliary Dynamic System for the Hovering Flight of a Tilt Tri-Rotor UAV

Attitude Control of a Single Tilt Tri-Rotor UAV System: Dynamic Modeling and Each Channel's Nonlinear Controllers Design

Transition flight modeling and robust control of a VTOL unmanned quad tilt-rotor aerial vehicle

Modeling and control of a class of urban air mobility tiltrotor aircraft

Multiple Modeling and Fuzzy Switching Control of Fixed-Wing VTOL Tilt-Rotor UAV

Underwater motions analysis and control of a coupling-tiltable unmanned aerial-aquatic quadrotor

Dynamics Modeling and Trajectory Tracking Control of a Quadrotor Unmanned Aerial Vehicle

Feedback linearization control for a tandem rotor UAV robot equipped with two 2-DOF tiltable coaxial-rotors

Modelling, design and control of middle-size tilt-rotor quadrotor

Modeling and Control of PADUAV: a Passively Articulated Dual UAVs Platform for Aerial Manipulation*

Active model-based nonlinear system identification of quad tilt-rotor UAV with flight experiments

Voliro: An Omnidirectional Hexacopter With Tiltable Rotors

Lifting-wing Quadcopter Modeling and Unified Control

A rotor-tilt-free tricopter UAV: design, modelling, and stability control

Design and Hover Control of a Tilt Tri-rotor Flying-wing Aircraft

Dynamics modeling and nonlinear attitude controller design for a rocket-type unmanned aerial vehicle