Abstract:We design the navigation and control system for unmanned aerial vehicle (UAV) with four tilting rotors. The considered UAV implements the so-called X-sceme, which implies the main body and four symmetrical beams, upon which rotors with propellers are mounted. It is different from the classical quadrotor by having four additional servomotors that may change the orientation of the rotors with respect t the main body, thus increasing the control parameters number. Greater number of the actuators in the system, on the one hand, opens new venues for UAVs’ applications but, on the other hand, makes the mathematical model of the UAV’s dynamics quite complicated. The latter calls for new control algorithms to be developed. We start by forming the mathematical models of the UAV’s dynamics. It is shown that the introduction of the tilting motors allows implementing independent control of the quadrotor’s position and attitude. The control loop is designed on the base on the analytical dynamics inversion. The expressions for the control parameters thus obtained are subjected to the numerical analysis, which allows taking into account technical constraints for maximal motor speed and tilt angles. Feedback in the control loop is implemented by simulation of the on-board sensors’ signals, whose characteristics correspond to those of the sensors used in the UAV’s experimental prototype design. The signals are processed with the aid of the unscented Kalman filter algorithm. The results of numerical experiments corroborate the efficiency of the developed control and navigation algorithms. The mission simulated in the numeric experiments is tracking of a pre-defined trajectory and pointing with a body-fixed camera at a mobile object, which, in turn, moves along a programmed trajectory.The results of the numeric experiments show that the UAV is capable of performing complex maneuvers with independent position and attitude control.

Feedback linearization control for a tandem rotor UAV robot equipped with two 2-DOF tiltable coaxial-rotors

Modeling and Control of an Omnidirectional Hexrotor UAV with Tilted-Rotors

Attitude Control of a Single Tilt Tri-Rotor UAV System: Dynamic Modeling and Each Channel's Nonlinear Controllers Design

Longitudinal dynamic modelling and control for a quad-tilt rotor UAV

A Nonlinear Robust Sliding Mode Controller with Auxiliary Dynamic System for the Hovering Flight of a Tilt Tri-Rotor UAV

Advanced Feedback Linearization Control for Tiltrotor UAVs: Gait Plan, Controller Design, and Stability Analysis

Tilt-Rotor Quadrotor Control System Design and Mobile Object Tracking

A Load Transportation Nonlinear Control Strategy Using a Tilt-Rotor UAV

Adaptive Attitude Control for a Coaxial Tilt-Rotor UAV via Immersion and Invariance Methodology

Design, Modeling, and Control of a Coaxial Drone

Feedback Linearization for Quadrotors UAV

Design and Control of a VTOL Aerial Vehicle Tilting its Rotors Only with Rotor Thrusts and a Passive Joint

Nonlinear Model Predictive Control of Tiltrotor Quadrotors with Feasible Control Allocation

Servo Integrated Nonlinear Model Predictive Control for Overactuated Tiltable-Quadrotors

Nonlinear Cascade Control for a New Coaxial Tilt-rotor UAV

Feedback linearization-based tracking control of a tilt-rotor with cat-trot gait plan

Nonlinear Control of a Single Tail Tilt Servomotor Tri-Rotor Ducted VTOL-UAV

Unified incremental nonlinear controller for the transition control of a hybrid dual-axis tilting rotor quad-plane

Thrust Vectoring Control of a Novel Tilt-Rotor UAV Based on Backstepping Sliding Model Method

Modeling and robust tracking control for coaxial unmanned helicopter

A new robust adaptive mixing control for trajectory tracking with improved forward flight of a tilt-rotor UAV