Abstract:In this paper, a control method of a novel tilt-rotor UAV with a blended wing body layout is studied. The novel UAV is capable of vertical take-off and landing and has strong stealth capabilities that can be applied to carrier-borne reconnaissance aircraft. However, the high aspect ratio of blended wing body UAVs leads to a wingtip or oar-tip touchdown problem when adopting the conventional position-attitude control (CPAC) scheme with a large crosswind disturbance. Moreover, when the UAV is subject to interference during reconnaissance, aerial photography, and landing missions, the conventional scheme cannot provide both attitude stability and track accuracy. First, a direct thrust vectoring control (DTVC) scheme is proposed. The control authority of the rotor tilt mechanism was added to enable the decoupling of the attitude and trajectory and to improve the response rate and response bandwidth of the flight trajectory. Second, considering the problems of strong couplings and parameter uncertainties and the nonlinear features and mismatched perturbations that are inevitable in the tilt-rotor, we designed a robust UAV controller based on the backstepping sliding mode control method and determined the stability of the control system through the Lyapunov function. Finally, in the case of crosswire interference during vertical takeoff and landing and the aerial photography missions of the UAV, the numerical simulation of the CPAC scheme and the DTVC scheme was carried out, respectively, and the Monte Carlo random test method was introduced to conduct the statistical test of the landing accuracy. The simulation results show that the DTVC scheme improves the landing accuracy and speed compared to the CAPC scheme and decouples the position control loop from the attitude control loop, finally enabling the UAV to complete the flight control in the VTOL phase.

Adaptive Attitude Control for a Coaxial Tilt-Rotor UAV via Immersion and Invariance Methodology

Filter-based Adaptive Backstepping Attitude Control for Multi-Rotor UAVs with Parametric Uncertainty, External Disturbance and Input Saturation

Adaptive Control for Quadrotors with Uncertain and Faulty Actuators

Position and Attitude Separation Control for Tiltable Quadrotors: an Appointed-Time Prescribed Performance Anti-Disturbance Approach

Immersion and Invariance-based Sliding Mode Attitude Control of Tilt Tri-rotor UAV in Helicopter Mode

Nonlinear Cascade Control for a New Coaxial Tilt-rotor UAV

Dynamics modeling and nonlinear attitude controller design for a rocket-type unmanned aerial vehicle

Design and Control of a New Coaxial Copter UAV

An adaptive recursive sliding mode attitude control for tiltrotor UAV in flight mode transition based on super-twisting extended state observer

A Nonlinear Robust Sliding Mode Controller with Auxiliary Dynamic System for the Hovering Flight of a Tilt Tri-Rotor UAV

Practical control implementation of tri-tiltRotor flying wing unmanned aerial vehicles based upon active disturbance rejection control

Attitude Control of a Single Tilt Tri-Rotor UAV System: Dynamic Modeling and Each Channel's Nonlinear Controllers Design

Unified Accurate Attitude Control for Dual-Tiltrotor UAV with Cyclic Pitch Using Actuator Dynamics Compensated LADRC

Adaptive compensation control for attitude adjustment of quad-rotor unmanned aerial vehicle

Aerodynamic Analysis of Rotor Spacing and Attitude Transition in Tilt-Powered Coaxial Rotor UAV

A new robust adaptive mixing control for trajectory tracking with improved forward flight of a tilt-rotor UAV

Thrust Vectoring Control of a Novel Tilt-Rotor UAV Based on Backstepping Sliding Model Method

Immersion and Invariance-Based Adaptive Controller for Quadrotor Systems

Longitudinal dynamic modelling and control for a quad-tilt rotor UAV

Modeling and Control of an Omnidirectional Hexrotor UAV with Tilted-Rotors

Adaptive Attitude Control for a Tail-Sitter UAV with Single Thrust-Vectored Propeller.