Abstract:This paper presents experimental investigations on aerodynamic performance of a ducted coaxial-rotor system to evaluate its potential application as a small unmanned aerial vehicle (SUAV). Aimed at determining the influence of design parameters (rotor spacing, tip clearance and rotor position within the duct) on hover performance, a variety of systematic measurements for several correlative configurations (single/coaxial rotor with or without a duct) in terms of thrust and torque, as well as power, were conducted in an attempt to identify a better aerodynamic configuration. The experimental results for the coaxial-rotor system indicated that varying rotor spacing affected the thrust-sharing proportion between the two rotors, but this had no significant effect on the propulsive efficiency. The optimal H/R ratio was identified as being 0.40, due to a larger thrust and stronger stability in the case of identical rotation speeds. As for the ducted single-rotor configuration, the tip clearance played a dominant role in improving its thrust performance, especially for smaller gaps (δ≤0.015R), while the rotor position made subordinate contributions. The maximum performance was obtained with the rotor located at the P5 position (0.31Cd from the duct lip), which resulted in an enhancement of approximately 20% in power loading over the isolated single rotor. When the coaxial rotors were surrounded within the duct, the system thrust for a given power degraded with the increasing rotor spacing, which was mainly attributed to the upper rotor suffering from heavier leakage losses. And hence, the ducted coaxial-rotor system with S1 spacing had the best propulsion efficiency and hover performance with a figure of merit of 0.61.

Design and Control of a New Coaxial Copter UAV

Canfly: A Can-Sized Autonomous Mini Coaxial Helicopter

Modeling and control of unmanned octocopter with slung load

Design, Modeling, and Control of a Coaxial Drone

Aerodynamic Analysis of Rotor Spacing and Attitude Transition in Tilt-Powered Coaxial Rotor UAV

Aerodynamic structural design and control for a new miniature coaxial dual-rotor unmanned aerial vehicle

Control System Design and Flight Testing for a Miniature Unmanned Helicopter

Nonlinear Cascade Control for a New Coaxial Tilt-rotor UAV

Adaptive Attitude Control for a Coaxial Tilt-Rotor UAV via Immersion and Invariance Methodology

Integral Backstepping Based Hovering Control of an Unmanned Coaxial Helicopter

Aerodynamic Investigation on a Coaxial-Rotors Unmanned Aerial Vehicle of Bionic Chinese Parasol Seed

Large-Sized Multirotor Design: Accurate Modeling with Aerodynamics and Optimization for Rotor Tilt Angle

Robust Model for the Design of Controller in Saucer UAV

Modeling and Control of an Omnidirectional Hexrotor UAV with Tilted-Rotors

Dynamics modeling and nonlinear attitude controller design for a rocket-type unmanned aerial vehicle

Design And Simulation Of Control System Of Dishing Uav

The modeling and cascade sliding mode control of a moving mass-actuated coaxial dual-rotor UAV

Experimental Investigation on Hover Performance of a Ducted Coaxial-Rotor UAV

Comprehensive Modeling and Analysis of an Unmanned Coaxial Helicopter

Modelling and Robust Control of an Unmanned Coaxial Rotor Helicopter with Unstructured Uncertainties

Modeling and robust tracking control for coaxial unmanned helicopter