Abstract:Purpose The purpose of this study is to design a flight control model for a control surface-less (CSL) tri-tilt-rotor (TTR) unmanned aerial vehicle (UAV) based on a Proportional Integral Derivative (PID) controller to stabilize the altitude and attitude of the UAV subjected to various flying conditions. Design/methodology/approach First, the proposed UAV with a tilting mechanism is designed and analyzed to obtain the aerodynamic parameters. Second, the dynamics of the proposed UAV are mathematically modeled using Newton-Euler formation. Then, the PID controller is implemented in the simulation model to control flight maneuvers. The model parameters were implemented in a mathematical model to find the system’s stability for various flight conditions. The model was linearized to determine the PID gain values for vertical take-off and landing, cruise and transition mode. The PID controller was tuned to obtain the desired altitude and attitude in a short period. The tuned PID gain values were implemented in the PID controller and the model was simulated. Findings The main contribution of this study is the mathematical model and controller for a UAV without any control surface and uses only a thrust vector control mechanism which reduces the complexity of the controller. The simulation has been carried out for various flight conditions. The altitude PID controller and the attitude PID controller for CSL-TTR-UAV were tuned to obtain desired altitude and attitude within the optimum duration of 4 s and deviation in the attitude of 8%, which is within the allowable limit of 14%. The findings obtained from the simulation revels that the altitude and attitude control of the CSL-TTR-UAV was achieved by controlling the rpm of the rotor and tilt angle using the PID controller. Originality/value A novel CSL TTR UAV mathematical model is developed with a dual tilting mechanism for a tail rotor and single axis tilt for the rotors in the wing. The flight control model controls the UAV without a control surface using a PID controller for the thrust vector mechanism.

A rotor-tilt-free tricopter UAV: design, modelling, and stability control

System Design of a Novel Tilt-Roll Rotor Quadrotor UAV

Tri-Tilting Rotor Fixed-Wing VTOL UAV: Dynamic Modelling and Transition Flight Control

A new control scheme for an aerodynamic-surface-free tilt-rotor convertible UAV

Modeling and Control of an Omnidirectional Hexrotor UAV with Tilted-Rotors

Longitudinal dynamic modelling and control for a quad-tilt rotor UAV

Design and Control of a VTOL Aerial Vehicle Tilting its Rotors Only with Rotor Thrusts and a Passive Joint

An innovative fuzzy backstepping sliding mode controller for a Tri-Rotor Unmanned Aerial Vehicle

A Nonlinear Robust Sliding Mode Controller with Auxiliary Dynamic System for the Hovering Flight of a Tilt Tri-Rotor UAV

Design, modeling and simulation of a control surface-less tri-tilt-rotor UAV

Tilt-Rotor Quadrotor Control System Design and Mobile Object Tracking

Attitude Control of a Single Tilt Tri-Rotor UAV System: Dynamic Modeling and Each Channel's Nonlinear Controllers Design

Dynamic Modeling and Control for Tilt-Rotor UAV Based on 3D Flow Field Transient CFD

Conversion control of a tilt tri-rotor unmanned aerial vehicle with modeling uncertainty

Modelling, design and control of middle-size tilt-rotor quadrotor

Developing of the smart quadcopter with improved flight dynamics and stability

Practical control implementation of tri-tiltRotor flying wing unmanned aerial vehicles based upon active disturbance rejection control

Transition flight modeling and robust control of a VTOL unmanned quad tilt-rotor aerial vehicle

Design and Hover Control of a Tilt Tri-rotor Flying-wing Aircraft

Design and Flight Control of a Novel Tilt-rotor Octocopter Using Passive Hinges

Spring-Damped Underactuated Swashplateless Rotor on a Bicopter Unmanned Aerial Vehicle