Abstract:Manipulation and grasping with unmanned aerial vehicles (UAVs) currently require accurate positioning and are often executed at reduced speed to ensure successful grasps. This is due to the fact that typical UAV s can only accommodate rigid manipulators with few degrees of freedom, which limits their capability to compensate for disturbances caused by the vehicle positioning errors. Moreover, UAV s have to minimize external contact forces in order to maintain stability. Biological systems, on the other hand, exploit softness to overcome similar limitations, and leverage compliance to enable aggressive grasping. This paper investigates control and trajectory optimization for a soft aerial manipulator, consisting of a quadrotor and a tendon-actuated soft gripper, in which the advantages of softness can be fully exploited. To the best of our knowledge, this is the first work at the intersection between soft manipulation and UAV control. We present a decoupled approach for the quadrotor and the soft gripper, combining (i) a geometric controller and a minimum-snap trajectory optimization for the quadrotor (rigid) base, with (ii) a quasi-static finite element model and control-space interpolation for the soft gripper. We prove that the geometric controller asymptotically stabilizes the quadrotor velocity and attitude despite the addition of the soft load. Finally, we evaluate the proposed system in a realistic soft dynamics simulator, and show that: (i) the geometric controller is fairly insensitive to the soft payload, (ii) the platform can reliably grasp unknown objects despite inaccurate positioning and initial conditions, and (iii) the decoupled controller is amenable for real-time execution. Video Attachment: https://youtu.be/NNpQxP0SPFk

Modeling and Control of MM-UAV: Mobile Manipulating Unmanned Aerial Vehicle

Aerial Mobile Manipulator System to Enable Dexterous Manipulations with Increased Precision

Modeling and Control of an Omnidirectional Micro Aerial Vehicle Equipped with a Soft Robotic Arm

Aerial Manipulation Using a Novel Unmanned Aerial Vehicle Cyber-Physical System

Control and Trajectory Optimization for Soft Aerial Manipulation

Modeling and Control of PADUAV: a Passively Articulated Dual UAVs Platform for Aerial Manipulation*

Constrained trajectory optimization and force control for UAVs with universal jamming grippers

Modelling and control of an aerial manipulator consisting of an autonomous helicopter equipped with a multi-link robotic arm

Model Predictive Path Integral Control for Agile Unmanned Aerial Vehicles

Static-Equilibrium Oriented Interaction Force Modeling and Control of Aerial Manipulation with Uni-Directional Thrust Multirotors

Design and Control of a Micro Overactuated Aerial Robot with an Origami Delta Manipulator

Towards Deep Learning Assisted Autonomous UAVs for Manipulation Tasks in GPS-Denied Environments

Robust Control of An Aerial Manipulator Based on A Variable Inertia Parameters Model

A Model Design in UAV Technology: A Multi-controller-based Wi-Fi Imaging Drone

Robust Observer-based Trajectory Tracking Control for Unmanned Aerial Manipulator

Learning to Fly Omnidirectional Micro Aerial Vehicles with an End-To-End Control Network

Redundancy-Driven Multi-Task Adaptive Backstepping Tracking Control for Aerial Manipulators

Modelling, Analysis and Control of OmniMorph: an Omnidirectional Morphing Multi-rotor UAV

Non-cascade Adaptive Sliding Mode Control for Quadrotor UAVs under Parametric Uncertainties and External Disturbance with Indoor Experiments

Design of a “Roadrunner” Mast-Type Robot Arm Based on a Small UAV

I Am the UAV: A Wearable Approach for Manipulation of Unmanned Aerial Vehicle