Abstract:B-modified MoSi2 coatings were prepared on pure Mo through pack Si–B co-deposition process. The effects of pack mixture, co-deposition temperature and time on the formation of the Si–B co-deposition coating were studied by preparing the coatings in the pack mixtures 16Si–xB–4NaF–Bal.Al2O3 (wt.%, x=0.5–4) at 1100–1400°C for 2.5–10h. XRD, EDS, and WDS techniques were used to examine the microstructures of the coatings. Thermodynamics calculation about the equilibrium partial pressures of the volatile fluoride vapors in the pack aided experimental observation was introduced to reveal the coating formation mechanism. The results showed that the Si–B co-deposition coating had four layers: the MoSi2 outer layer with MoB precipitates distributed within its lower part, the Mo5Si3 second layer, the MoB third layer and the Mo2B inner layer. Pack mixture, co-deposition temperature and time made negligible effect on coating structure. The growth of the coating was dominated by the inward diffusion of Si and B. The deposited Si atoms mainly formed MoSi2 phase; the deposited B atoms either diffused into the substrate to form the MoB and Mo2B layers or generated MoB precipitates within the MoSi2 outer layer. The effects of B atoms within the Si–B co-deposition coating on coating oxidation manifested in two aspects: firstly, B atoms diffused to coating surface and oxidized to B2O3, which promoted the formation of a dense scale and reduced the coating weight loss; and secondly, the MoB layer acted as a barrier to the inward diffusion of Si, which slowed the degradation of MoSi2 to poor oxidation-resistant Mo5Si3 and would increase the coating lifetime.

Fabrication and Growth Mechanism of Al-Si Coatings Deposited on Mo Substrate by Hot Dip Plating Technology

Morphology, phase composition, surface roughness evolution and growth mechanism of hot-dip aluminum coating on Mo substrate

Low-temperature Oxidation Behavior and Mechanism of Hot-Dip Al and Al Si Coatings on Mo Substrate at 600 °C in Static Air

Formation and Oxidation Behavior of Mo-Si-B Composite Coatings with B-rich Interlayer Prepared by Slurry Sintering Method

Formation of MoSi2 and Si/MoSi2 coatings on TZM (Mo–0.5Ti–0.1Zr–0.02C) alloy by hot dip silicon-plating method

Micromorphology Evolution, Growth Mechanism, and Oxidation Behaviour of the Silicon-Rich MoSi2 Coating at 1200 °C in Air

Effects of Al on Si-Al-Y2o3 Co-Deposition Coatings on Nb-Ti-Si Base Ultrahigh Temperature Alloy

Development of Mo(Si,Al)2-MoB Composite Coatings to Protect TZM Alloy Against Oxidation at 1400 °C

Microstructure and Mechanical Properties of MoSi2 Coating Deposited on Mo Substrate by Hot Dipping Processes

Micromorphology evolution, growth mechanism, and oxidation behaviour of the silicon-rich MoSi 2 coating at 1200 °C in air

Microstructure evolution and growth mechanism of Si-MoSi2 composite coatings on TZM (Mo-0.5Ti-0.1Zr-0.02 C) alloy

Effect of Hot-Dip Siliconizing Time on Phase Composition and Microstructure of Mo–MoSi2 High Temperature Structural Materials

Microstructure and Oxidation Resistance of Y Modified Silicide Coatings Prepared on Zr-Ti-Al Alloy

Electrodeposition and the Optimization of Molybdenum Layer on Nb-Ti-Si Based Ultra-High Alloys from Aqueous Solution

Microstructure and oxidation behavior of Si-MoSi2 coating deposited on Mo substrate at 600 °C and 900 °C in static air

Formation of B-modified MoSi 2 coating on pure Mo prepared through HAPC process

Characterization of Microstructure and Oxidation Behavior of Al Modified MoSi2 Coating on Nb-Si Based Alloy

Co-deposition of aluminum and silicon on pure molybdenum substrate using halide activated pack cementation treatments

Preparation and Formation Mechanism of MoSi2 Coating on Molybdenum Alloy

Deposition and Oxidation Behavior of Mo(Si,Al)2/MoB Layered Coatings on TZM Alloy

Synthesis of Si-NbSi 2 Coatings on Nb Substrate by Hot Dip Silicon-Plating Method under the Various Deposition Temperatures