Abstract:Recently a contact solid carburization method to fabricate carbide coatings on refractory metals was proposed. The principle is to hot-press the refractory metal with a "carbon sponge" (e.g. cast iron or high-carbon steel) which contains interstitial carbon atoms. When they contact in atomic scale at high temperatures, the carbon atoms diffuse into the refractory metal matrix and then dense carbide coatings on the substrates can be obtained since most refractory metals are carbide forming elements. In this article, we apply this method to prepare carbide coating on molybdenum (Mo). Cast iron is used as the "carbon sponge" and hot-pressed with textured Mo at constant temperature and pressure (18 MPa). We set the temperature at 1100 degrees C and 900 degrees C separately, we found that coatings containing Fe-Mo-C layer and Mo-C layer are generated at 1100 degrees C while coatings containing only Mo-C layer are formed at 900 degrees C. We then hot-pressed the samples at 900 degrees C for 2-10 h and systematically investigated the microstructure and some basic properties of the coatings obtained at 900 degrees C. The coating grows inward, it is pure ceramic and completely dense. The coating is composed of columnar Mo2C grains whose grain orientations are randomly distributed. The metal and carbide phases are metallurgically bonded with incoherent interfaces. The coating thickness reaches 1.8 mu m when annealed for 10 h. As expected, the surface hardness is remarkably improved and the coating adhesion is strong. This technique is also expected to be used to improve the wear resistance, oxidation resistance for molybdenum and Mo based alloys and may also provide a new strategy to prepare Mo2C superconductors and catalysts.

Preparation and Formation Mechanism of MoSi2 Coating on Molybdenum Alloy

Formation and Oxidation Behavior of Mo-Si-B Composite Coatings with B-rich Interlayer Prepared by Slurry Sintering Method

Preparation And Analysis Of Molybdenum Coating On The Surface Of Silicon Carbide

Deposition and Oxidation Behavior of Mo(Si,Al)2/MoB Layered Coatings on TZM Alloy

Microstructure evolution and growth mechanism of Si-MoSi2 composite coatings on TZM (Mo-0.5Ti-0.1Zr-0.02 C) alloy

Formation of MoSi2 and Si/MoSi2 coatings on TZM (Mo–0.5Ti–0.1Zr–0.02C) alloy by hot dip silicon-plating method

In-situ synthesis of MoSi 2 coating on molybdenum substrate by electro-deoxidation of a SiO 2 layer in molten salt

Preparation of Molybdenum Coating on Surface of SiC Particles by Sol-Gel Method

Fabrication of MoSi2 coatings on molybdenum and its high-temperature anti-oxidation properties

Microstructure and Oxidation Behavior of Si–MoSi2 Functionally Graded Coating on Mo Substrate

Fabrication of Mo2C Coating on Molybdenum by Contact Solid Carburization

Preparaion and Structure Property Analysis of Oxidation-Resistant MoSi2 Coatings for Columbium Alloys

Effect of Reaction Temperature on the Molten Salt Electrodeposition of Silicide Coating on Molybdenum Substrate and its Oxidation Behavior

Effect of Mo/Si Ratio on the Microstructure and Oxidation Resistance of Si-Mo Coating for C/C Composites

Preparation and high‐temperature oxidation resistance of multilayer MoSi 2 /MoB coating by spent MoSi 2 ‐based materials

Microstructure and oxidation resistance of Si-MoSi2 ceramic coating on TZM (Mo-0.5Ti-0.1Zr-0.02C) alloy at 1500 °C

Microstructure and oxidation behavior of Si-MoSi2 coating deposited on Mo substrate at 600 °C and 900 °C in static air

The Characters of Mo-Mosi2 Functionally Graded Coating

Micromorphology evolution, growth mechanism, and oxidation behaviour of the silicon-rich MoSi 2 coating at 1200 °C in air

Morphology and Structure of Mo(Si,Al)_2 High Temperature Oxidation Resistant Coating

Formation and oxidation behavior of Ce-modified MoSi2-NbSi2 coating on niobium alloy