Abstract:The article is the continuation of a cycle of works published in a Special Issue of MDPI entitled "Innovative Technologies and Materials for the Production of Mechanical, Thermal and Corrosion Wear-Resistant Surface Layers and Coatings" related to tests concerning the microstructure and mechanical properties of innovative surface layers made using the Powder Plasma Transferred Arc Welding (PPTAW) method and intended for work surfaces of drilling tools and machinery applied in the extraction industry. A layer subjected to tests was a metal matrix composite, made using powder based on a nickel alloy containing spherical fused tungsten carbide (SFTC) particles, which are fused tungsten carbide (FTC) particles and spherical particles of tungsten-coated synthetic metal-diamond composite (PD-W). The layer was deposited on the substrate of low-alloy structural steel grade AISI 4715. The results showed that the chemical composition of the metallic powder as well as the content of the hard phase constituting the matrix enabled the making of a powder filler material characterised by very good weldability and appropriate melting. It was also found that the structure of the Ni-WC-PD-W layer was complex and that proper claddings (characterised by the uniform distribution of tungsten carbide (WC)) were formed in relation to specific cladding process parameters. In addition, the structure of the composite layer revealed the partial thermal and structural decomposition of tungsten carbide, while the particles of the synthetic metal-diamond composite remained coherent. The deposited surface layer was characterised by favourable resistance to moderate dynamic impact loads with a potential energy of 200 J, yet at the same time, by over 12 times lower metal-mineral abrasive wear resistance than the previously tested surface layer made of cobalt-based composite powder, the matrix of which contained the hard phase composed of TiC particles and synthetic metal-diamond composite. The lower abrasive wear resistance could result from a different mechanism responsible for the hardening of the spherical particles of the hard phase susceptible to separation from the metal matrix, as well as from a different mechanism of tribological wear.

A Novel Plasma-Facing NdB6 Particulate Reinforced W1Ni Matrix Composite: Powder Metallurgical Fabrication, Microstructural and Mechanical Characterization

Potential Plasma Facing Materials: A Case Study on CeB6 Particulate Reinforced W–1Ni Matrix Composites Produced Via Different Sintering Techniques

MoB2/MoB Ceramic Particulate Reinforced W-1 Wt % Ni Matrix Composites As Potential Plasma Facing Materials

Mechanical Properties of a Novel Tungsten Fiber-Reinforced Tungsten Composite Prepared Through Powder Extrusion Printing and High-Pressure High-Temperature Sintering

Demonstrating tungsten fiber-reinforced porous-matrix tungsten composites for future fusion application

Preparation and Sintering Performance of W-Ni/Yb2O3 Composite Materials

Discovering tungsten-based composites as plasma facing materials for future high-duty cycle nuclear fusion reactors

Effect of W-coated Diamond on the Microstructure and Thermal Conductivity of Diamond/w Matrix Composites for Plasma-Facing Materials (Pfms)

Highly porous tungsten for plasma-facing applications in nuclear fusion power plants: a computational analysis of hollow nanoparticles

Enhanced properties of hard metal WC-Ni processed from nanostructured powders

Matrix Composite Coatings Deposited on AISI 4715 Steel by Powder Plasma-Transferred Arc Welding. Part 3. Comparison of the Brittle Fracture Resistance of Wear-Resistant Composite Layers Surfaced Using the PPTAW Method

Fabrication and Characterization of Tungsten Heavy Alloys with High W Content by Powder Metallurgy

Recent progress of thick tungsten coating prepared by chemical vapor deposition as the plasma-facing material

Processing and Properties of Tungsten-Steel Composites and FGMs Prepared by Spark Plasma Sintering

Microstructural Effects of Y2O3 and TiC Additions in Tungsten

Research and development of nanocrystalline W/W-based materials: novel preparation approaches, formation mechanisms, and unprecedented excellent properties

Plasma processed tungsten for fusion reactor first-wall material

Microstructural and Mechanical Characterization of Colloidal Processed WC/(W5Vol%Ni) via Spark Plasma Sintering

Method of W-Ni-Fe Composite Spherical Powder Production and the Possibility of Its Application in Selective Laser Melting Technology

Preparation of Tungsten Fiber Reinforced-Tungsten/copper Composite for Plasma Facing Component