Abstract:This paper describes the results of the first phase of a study on the sheet metal response in a car structure subjected to impact loads produced during a crash. A mathematical model of thin elasto-plastic (material nonlinearity) shells with large deflection (geometrical nonlinearity) is used to model the sheet metal. In this part of the work, the stresses and deformations in a thin shell are determined under equivalent static loads so that the deformation theory of plasticity can be applied in the formulation.Based upon the nonlinear shell theory and the deformation theory of plasticity, the potential energy functional for a shell structure is derived in a curvilinear coordinate system. Using curved triangular elements, the potential energy functional is reduced to the potential energy function of the nodal displacements. The gradient search method is applied to find a set of nodal displacements such that the potential energy function is a minimum; thus this set is the solution to the shell structure. The most severe problem that one encounters when applying the energy search method to solve structural problems with both material and geometrical nonlinearities is slow convergence. To improve this slow convergence near the end of the search process, the intermediate solution from the search process obtained prior to the onset of slow convergence is used as an initial guess input to the “Alpha”-Constant Stiffness Method. Both solution accuracy and overall computer time are improved with this procedure.The combined method is applied to solve three sample problems for which solutions exist in the literature to demonstrate its accuracy and economy in computer time. In addition, the load-deflection curve is computed numerically for a cylindrical panel under a concentrated load at the center. These results were also checked with the force-deflection curve from an actual experimental test of the panel and excellent agreement was observed.

Elastica-plastica Theory of Euler-Bernoulli Beams Subjected to Concentrated Loads

Elastoplastic Analysis with Fine Beam Model of Vector Form Intrinsic Finite Element

Elastic flexural-torsional buckling of thin-walled cantilevers

Predicting the Dynamic Response of Elastic-Plastic Beams by Dimensional Analysis

A Theory of Nonlinear Finite Element Analysis

ELASTO-PLASTIC LARGE DISPLACEMENT ANALYSIS OF SPATIAL SKELETAL STRUCTURES

Elasto-Plastic Analysis of Steel Framed Structures Based on Rigid Body Rule and Plastic-Hinge Concept

Simplified Analysis of Elasto-plastic Plane Steel Frames with Large Displacement

PLASTIC LIMIT LOAD EQUATIONS OF DEFECT FREE ELBOWS SUBJECTED TO IN-PLANE BENDING MOMENT

An Approach to Elastoplasticity at Large Deformations

Elasto-Plastic Finite Element Model On Thin-Walled Spatial Beams

An Analytical Method for Elastic-Plastic Stress in A Thermoplastic Composite Cantilever Beam Subjected to Bias-Axis Tension Load

Analysis for Plastic Buckling of Thin-Walled Cylinders Via Non-Classical Constitutive Theory of Plasticity

Elasto-plasticity theory for large plastic deformation and its use for the material stiffness determination

Elastoplastic analysis of compact and thin-walled structures using classical and refined beam finite element models

An Elastoplastic Peridynamic Beam Model for Large Bending Deformation and Fracture Analysis

Elasto-plastic and large deformation analysis of thin shells by the deformation theory of plasticity

Advanced Plate Theory for Multibody Dynamics

An integral elasto-plastic constitutive theory

Anomalous Behavior Revisited: Dynamic Response of Elastic-Plastic Structures

A geometrically exact thin-walled rod model with warping and stress-resultant-based plasticity obtained with a two-level computational approach