Abstract:In this work, we presented a simple strategy to fabricate medium dielectric constant and low-loss composites for microwave substrate applications. MgO-LiF co-doped Li2TiO3 (LT) powders were fabricated by the solid-state reaction route and modified by perfluorooctyltriethoxysilane (F8261). The LT/polytetrafluoroethylene (PTFE) composites were fabricated by cold pressing and hot treatment. The XPS and contact angle analysis indicated that the fluorinated group was introduced to LT particle successfully. The effects of modified LT powders content on the dielectric, thermal, and mechanical properties of composites were investigated. As the modified LT content increases, the dielectric constant, dielectric loss, and temperature coefficient of dielectric constant (tau(epsilon)) increase while the bending strength and coefficient of thermal expansion (CTE) decrease, which is attributed to the higher dielectric constant of LT ceramic, more pores, stable tau(epsilon) of LT ceramic, interface defects and low CTE of LT ceramic, respectively. The composites with 60wt % LT exhibit the best microwave dielectric properties: epsilon(r) = 6.8, tan delta = 0.001, tau(epsilon) = -29.6 ppm degrees C-1 at 8GHz and acceptable coefficient of thermal expansion (28.3 ppm degrees C-1). Therefore, modified LT powders filled PTFE composites are potential materials for high-frequency microwave substrate applications. (c) 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 47980.

Polyphenylene Oxide/sio2 Composites: Towards Ultra-Low Dielectric Loss and High Thermal Conductivity of Microwave Substrates

Modified poly(phenylene oxide)/(CaSr)TiO 3 composites with ultrahigh permittivity and low loss for microwave substrates

Modified Poly(phenylene Oxide)/(casr)tio3 Composites with Ultrahigh Permittivity and Low Loss for Microwave Substrates

Ultra-high Dielectric Constant and Thermal Conductivity SrTiO3@VTMS/PB Composite for Microwave Substrate Application

Enhanced Thermal Conductivity and Microwave Dielectric Properties by Mesostructural Design of Multiphase Nanocomposite

Investigation of PTFE-based ultra-low dielectric constant composite substrates with hollow silica ceramics

Low loss flexible SrTiO 3 /POE dielectric composites for microwave application

Enhanced Dielectric and Thermal Properties of SrTiO3/polyolefin Composite Substrate with Dopamine-Modified BNNS for Microwave Applications

Dielectric properties of SrTiO3/POE flexible composites for microwave applications

Medium Dielectric Constant And Low-Loss Ptfe Composites Filled With Mgo-Lif Co-Doped Li2tio3 Particles

High Microwave Dielectric Constant and Improved Thermal Stability of Functionalized Zn0.15Nb0.3Ti0.55O2-filled Polyolefin Composites

Fluorine-terminated functionalized liquid metal/silicon carbide binary nanoparticles for polyvinyl alcohol composite films with high in-plane thermal conductivity and ultra-low dielectric constant

Surface-modified Li3Mg2NbO6 ceramic particles and hexagonal boron nitride sheets filled PTFE composites with high through-plane thermal conductivity and extremely low dielectric loss

Core-Shell Sr2CeO4@SiO2 Filled COC-Based Composites with Low Dielectric Loss for High-Frequency Substrates

Properties of low loss ZrTi2O6 filled PTFE composite substrates

Research Progress of the Preparation and Application of Low Dielectric Materials

Improved coefficient thermal expansion and mechanical properties of PTFE composites for high-frequency communication

Morphological Engineering of SiO2 Interlayer Towards Meliorative Dielectric and Thermal Properties in Β‐sicw@sio2/pvdf Composites

Thermally Stable Silicone Elastomer Composites Based on MoS2@Biomass-Derived Carbon with a High Dielectric Constant and Ultralow Loss for Flexible Microwave Electronics

TiO2 and SiO2 Filled PTFE Composites for Microwave Substrate Applications

Characterization and performance of plate-like Ba0.6Sr0.4TiO3/Poly(vinylidene fluoride – trifluoroethylene -chlorotrifluoroethylene) composites with high permittivity and low loss