Abstract:In this paper, a feedback control mechanism and its optimization for rotating disk vibration/flutter via changes of air-coupled pressure generated using piezoelectric patch actuators are studied. A thin disk rotates in an enclosure, which is equipped with a feedback control loop consisting of a micro-sensor, a signal processor, a power amplifier, and several piezoelectric (PZT) actuator patches distributed on the cover of the enclosure. The actuator patches are mounted on the inner or the outer surfaces of the enclosure to produce necessary control force required through the airflow around the disk. The control mechanism for rotating disk flutter using enclosure surfaces bonded with sensors and piezoelectric actuators is thoroughly studied through analytical simulations. The sensor output is used to determine the amount of input to the actuator for controlling the response of the disk in a closed loop configuration. The dynamic stability of the disk-enclosure system, together with the feedback control loop, is analyzed as a complex eigenvalue problem, which is solved using Galerkin’s discretization procedure. The results show that the disk flutter can be reduced effectively with proper configurations of the control gain and the phase shift through the actuations of PZT patches. The effectiveness of different feedback control methods in altering system characteristics and system response has been investigated. The control capability, in terms of control gain, phase shift, and especially the physical configuration of actuator patches, are also evaluated by calculating the complex eigenvalues and the maximum displacement produced by the actuators. To achieve a optimal control performance, sizes, positions and shapes of PZT patches used need to be optimized and such optimization has been achieved through numerical simulations.

Active Vibration Control of Rotating Carbon Nanotube Reinforced Composite Cylindrical Shells Via Piezoelectric Patches

Active Vibration Control of CNT-reinforced Composite Cylindrical Shells Via Piezoelectric Patches

Fuzzy Controller For Active Vibration Control Of Cylindrical Shells

Optimal Control of Clamped-Free Conical Shell Using Diagonal Piezoelectric Sensor and Actuator

Microscopic actuation and optimal actuator locations of paraboloidal cylindrical shells

Optimal vibration control of conical shells with collocated helical sensor/actuator pairs | Optymalne sterowanie drganiami powłok stożkowych za pomoca{ogonek} spiralnego skolokowanego układu czujnika i elementu wykonawczego

Spatially Filtered Vibration Control of Cylindrical Shells

Multi-mode Vibration Averagely Control for Cylindrical Shells by Optimally Distributed Piezoelectric Sensors and Actuators

Traveling Wave Vibration Control of Rotating Functionally Graded Conical Shells Via Piezoelectric Sensor/actuator Pairs

Vibration Control of Toroidal Shells with Parallel and Diagonal Piezoelectric Actuators

Optimal Control Of Piezoelectric Laminated Parabolic Cylindrical Panels

Wireless Active Vibration Control of Thin Cylindrical Shells Laminated with Photostrictive Actuators

Active Control of Nonlinear Piezoelectric Circular Shallow Spherical Shells

Theoretical analysis of a multi-layered thin shell coupled with piezoelectric shell actuators for distributed vibration controls

Research on active vibration control of piezoelectric composite shells

Micro-Photodeformation Actions of Photostrictive Actuator Patches Applied to Vibration Control of Cylindrical Shells

Distributed Actuation Effectiveness of Flexible Parabolic Cylindrical Panels

Control Force Enhancement Of Conical Shells Using Piezoelectric Macro-Fiber Composite

Dynamic Analysis of Flexoelectric Actuated Truncated Conical Shells

Optimization of Sensing and Feedback Control for Vibration/Flutter of Rotating Disk by PZT Actuators Via Air Coupled Pressure

Control of Static Shape, Dynamic Oscillation, and Thermally Induced Vibration of Nozzles